181 models
it is used to attract fish by throwing it into the water, it will flow while reflecting light which creates flashes imitating an injured fish or other. It is mainly used to attract predators. It must be covered with aluminum or adhesive…
WTF?: This 3D model is a masterpiece, elegantly integrating a macro lens camera, its cable, and an LED light plugged into the Prusa Mini/Mini+ USB-A port with simplicity and perfection. BOM: 1.Camera: Following one is suitable. Pibiger 8M…
Remixed version with thicker hinges and less overhangs.
Dear friends, meet my new sea star — even more movable, even more beautiful. She bends and curls like she’s alive, no supports needed, joints strong as hell. Won’t leave anyone cold. Printed it in lavender and can’t stop fidgeting with…
The clearances are designed for printing with a 0.4 mm nozzle and a 0.2 mm layer height. Print with 3 perimeters for proper strength in the joints.
Print it without any supports ! Please support my work by leaving a like and follow Get access to a lot of my models on my Patreon Don't Forget to Follow me on Category: Toy & Game Accessories
This flexible starfish is an easy print that has been carefully designed to not make use of any bridging to provide for the articulated joints, and requires no supports or other special print options. Its size allows it to serve well as a…
Easy to print, no supports ✅ hole for keychain 🔑 Don't forget to give me a like Share photos of your prints 🎣 Personal use only ⚠ No commercial 👉 Check My Patreon 👈
Fun articulating starfish! Can be printed in resin or FDM PRINTING INSTRUCTIONS: Do not use a brim Keep infill at 100% or use a high wall count
Photogrammetry scan of a starfish shell I got in Croatia in 1998. The scan was repaired to have a perfectly flat bottom and no holes. The pictures for photogrammetry were taken with an iPhone X and Meshroom was used to reconstruct the…
This 3D printable model is a Flexi Starfish that has flexible legs. It’s a cute and fun toy that you can bend and twist in different ways. You can use it as a decoration, a fidget toy, or a gift for someone who loves the sea. This model…
A starfish consisting of two separate parts which, when put together, create a two-color model! 2 different sizes: Normal: 12x12 cm Small: 8x8 cm Print settings: Infill: 15% . Support: No Layer height: 0,2mm Material: PETG / PLA
An easy to print geometric starfish sand mold with no supports required. Print flat side down and scale up or down as desired. Example photos are printed with Prusament PETG Pistachio Green at 0.2mm with a 0.4 nozzle and 15% infill.
Very fun, and quite fidget; good for school
I dunno, I just decided I need a reef wreath. Here are some starfish for @MagnumDanger's giant LEGO wreath. Printed with supports. Thank you pmoews , lcds and Scorpa54 for the original starfish models. Wreath can be found here:…
Now you can get the most articulated Starfish ever!!! There are two size versions, one which fits to a 200mm bed and the big ones which needs 265mm bed size and three variants for the center part. The arms are made of 11 parts in the…
This starfish was scanned and exported into a stl file that is perfectly textured.
Added ring to add starfish to a keychain. Use support enforcers for the ring. 3MF included if it's any use. For some reason when I convert the original designs mesh to it creates a lot of bodies and combining them doesn't seem to work…
Esta es una réplica 3D de la estrella de mar que se volvió viral tras el stream en vivo del CONICET junto al Schmidt Ocean Institute , durante la expedición al Cañón de Mar del Plata , en el Mar Argentino. Apodada por internet como…
Easy to make a cute Starfish keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Just a fun starfish with organic looking surface. Was meant to replace dried sea stars as props. Glue both parts together. Printed with 0.2 mm nozzle in PETG. Empiricus@Dremomys Print Settings Printer Brand: Monoprice Printer: Maker…
you can put a ~ 3.5mm stick in his mouth (back) or use the balljoint adapter and connect to the articulated Arm
Pet Enrichment Toy Simply put a treat or morsel under each of the sliders then give the toy to your pet and leave it to them to work out how to retrieve the treats. The design is based on something I saw for a small dog, although I've…
Print Settings Material: C-Tech Bronze Pla Nozzle: 0.4mm Layerheight: 0.1mm Supports: No necessary, work fine, don't have to be scared at the first layer. For a nicer top surface: Change the Lift Z to 0.1 Top fill pattern: Concentric
I was inspired by a visit to an Escher exhibit in NYC. The model needs to be printed 12 times and the pieces assembled into a sphere. I have had the best success in assembling if at least 6 of the 12 stars are printed with TPU. If all 12…
Una iman para heladera inspirado en la simpatica estrella hallada en el fondo del mar en Mar del Plata Argentina. Se imprime acostada y sin soportes. idealmente con altura de capa de 0.12
This remix provides two different versions of the tessellation tile that have either a hole or a loop for turning the tessellation into an ornament. I love the model by @RobertSoto_503356, it is a real work of art. I previously remixed it…
Cartoon starfish modeled in Blender 2.8. Category: Animals
I wanted to make a cute, cartoon-y puffer fish. The .stl file has the full round fish without a flat spot for the base - I tipped it up 10 degrees in the front and cut a bit off the bottom in the slicer. The .3mf file has those…
Spearfishing Speargun Reel The original model was super vague on assembly instructions and the mount didn’t fit my gun. You can’t resize it because then it wouldn’t mount to the rest of the reel. My mount uses just two zip ties and mounts…
This stylish starfish sand mold will bring happiness to your younglings in the sandbox or at the beach. Printing : 0.2mm layer height with 15% infill works well. Scale as you wish and print with the flat side down without supports. Enjoy!…
I love the model by @RobertSoto_503356, it is a real work of art. He mentioned that he needed to print a portion of them in TPU to do the assembly. And they needed supports to print. So… I thinned the shell and filleted the edge to make…
Easy to make a cute Pufferfish keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Get the 4-pack bundle on Etsy: https://cookystl.etsy.com/listing/4461232878/4-ocean-cookie-cutter-stl-bundle Commercial license available here: https://www.patreon.com/CookyStl DIGITAL DOWNLOAD – NO PHYSICAL ITEM WILL BE SHIPPED Bring the…
Do as u please. If you want to 3D print it pls edit to your liking. layers and details heights are 0.01 in height. change if you wish to 3D print with FDM printers
I dunno, I just decided I need a reef wreath. Tangs and pufferfish for @MagnumDanger's giant LEGO wreath. Printed with supports. Thank you @DevCyclops and @Encrust3d_715329 for the original fish models. Wreath can be found here:…
This anglerfish wall mount prints in two parts: the skeleton and the backplate. I printed the fish in translucent Carmine Red PETG and the plate in Bambu’s black basic PLA. After printing, I dry-brushed the wall mount to give it a…
be careful when taking off supports, you might break the light!
Bring a soft coastal touch to your vanity, dresser, bathroom counter, nightstand, or beach house decor with this Starfish Seashell Jewelry Tray STL. This 3D printable model features a beautiful seashell-inspired tray base with two…
🌟 Meet the Flexi Starfish! This soft-looking starfish is anything but stiff. Its whole body is covered in hexagon tiles, each one linked to its neighbours with tiny rings hidden inside. No assembly, no glue, no supports: print it, pop it…
This delightfully whimsical 3D printed creation brings the wonder of the ocean to your home. The articulated starfish features a central disc with five adorable arms that can bend and flex, allowing it to strike playful poses. Each arm is…
Whenever I need to do some soldering, I have Patrick Starfish helping me out. The adjustable hose I picked up seems to have a narrower fitting than most, so I made my own version of a base. The pipe fitting just slips in place, but a…
Deep Sea Anglerfish Wall Sculpture
Es ist meine erste Konstruktion also wenn man Fehler findet, bitte nicht zu streng sein. 3MF vorhanden, mit 15% infill und höherer Lüfterleistung sollte es top werden. Vorsicht, die Dornen sind sehr spitz! Eine weitere Version mit…
Clicker for arbalete. Attract fish using the click sound underwater. Category: Hobby
3D model description Print these 3d starfish model. I added a magnet slot measuring 10mm x 2mm. Want to buy me a coffee? https://buymeacoffee.com/3deate https://paypal.me/3deate 3D printing settings Printer: Creality Ender 3 V3 SE…
this model is built on the basis of scanning a real model of the handle of the Zelinka spearfishing gun
Chunky five-armed starfish seeks compatible buttonhole. Printed in PETG, no supports, no special settings.
A nice model to give your friends who like eating fugu or just like fish. Print Settings: Add snug supports, as these reduce print time&material Layer height: Recommended 0.15mm, but 0.2mm if you just want a quick print. pls help me get…
This articulated starfish is the ultimate ocean-inspired fidget toy! Designed with flexible, movable joints, it’s perfect for relieving stress or keeping your hands busy. Whether you're a fidget enthusiast or just love unique, sea-themed…
Um modelo 3D monocromático de uma mulher em pé, usando biquíni e segurando uma prancha de surfe verticalmente ao seu lado esquerdo. A figura apresenta proporções atléticas, postura confiante e detalhes anatômicos bem definidos, com o pé…
Just a simple starfish mold to use on sand. If you like my creations, you can support me here !
Make adorable beach-themed cookies and toppers with this free starfish cookie cutter and embosser STL set, designed for crisp detail and easy use. This is the free cutter from our ocean-themed cookie cutter collection. 📦 What's Included:…
Diese Ausstecher in Form einer stilisierten Seesterns wurden so gestaltet, dass die Gebäckstücke leicht ausgestochen und ohne Probleme den Teig entnommen werden können. Sie gibt es in verschiedenen Größen. Die Ausstecher sind leicht zu…
Let the kids play and learn at the same time with this dashing starfish toy 😎 The idea of this toy is for kids to play and learn during baths. The back has the alphabet and numbers for them to learn and familiarize themselves with. Feel…
AI-generated starfish. I modified the generated 3d file to make it more printable by creating a flat bottom. Both versions are downloadable.
This pufferfish figure features rounded bumps fused into the body for a clean and printable design. Designed to look like a real FDM 3D print with visible layer lines and a matte filament finish. Powered by MakerWorld-Image-to-3D (…
Cookie cutter design of Patrick Starfish whose been watching his eats. For commission/business enquiries please email me via [ [email protected] ]. Join my 3D printing server for updates: https://discord.gg/Xp56XtPp Check out the rest…
A starfish sculpture by Alaska Native artist, Henry Kroll Category: Sculptures
Dowloand another model here: https://payhip.com/b/Z4KUm Download : https://payhip.com/b/Bigej
My attempt at modeling a starfish from this question: https://www.reddit.com/r/Fusion360/comments/1invmvr/i_am_trying_to_make_a_starfish_basic_shape_that_i/
Commercial license available here: https://www.patreon.com/CookyStl This shark cookie cutter STL set is a digital file collection with ocean-themed shapes for making shark, wave, starfish, fin, and tooth-style cutters. Included in this…
A surreal starfish with 12 legs. Designed to be printed without supports. Please "Like" this file, if you collect or download it. Category: Sculptures
Various shapes of the P-Top. Fits well enough with my settings using ABS @ 0.6nozzle/0.3mm LH. Did not optimize to save filament so it does use a good chunk of material. Recommend using a brim and printing in orientation in the…
Articulated, print in place, flexi, starfish.Very good as desk toy, anti stress, printer test or giving it as a gift. I printed this model using the following 3D printer settings, but other slicing settings could work as well and this is…
Simplified five-point starfish with clean low poly geometry.
Made an update to the old design and made a keychain version as well, not able to print this version because i don't have the colours needed and a MMU. Model needs MMU, colour separated by layers excluding Black No supports needed
My chopstick holder has the shape of a starfish. It combines decoration and functionality in one. A support structure is needed for the first layers. But the model can be pushed a little into the heating bed, then this is not required.…
A dwarf striking the ground with an electrified hammer, lightning carved into the base. Solid, printable model. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
USB, SD, and Micro SD holder. Nothing fancy, looks neat on your desk. Some USBs are a tight fit. Might help to print at 101%
A starfish sculpt. 3 Versions, a natural one, a low poly one, and a wireframe one. The former two should print without supports, the latter requires organic tree supports @ 5 degrees to feel solid (I suspect it can print with none).…
Scale to your own desire! Commercial License Available on my Patreon- patreon.com/Deadlisins Check out my Profile for more Prints! Add a splash of seaside charm to your accessories with these starfish earrings! Featuring an intricate…
Print in vase mode, 2 bottom layers, 0.4 nozzle. Introducing the Starfish S5 light diffuser, a sophisticated accessory designed to enhance your torch light experience. Print in vase mode with a 0.4mm nozzle and two bottom layers, this…
Figured a puffer fish chopstick holder would be ironic for eating fugu.
Here’s a new adorable sea creature for you — the Cute Starfish. With its truly charming and eye-catching design, it’s hard to resist. Perfect as a small companion on your keychain or as a decorative figure. Features: 3MF multicolor files…
Supports on buildplate are required. Printable storage box also included, but be aware I had to do some melting to get the metal pendant to fit after all was said and done.
Emersa dagli abissi dell’immaginazione e trasformata in materia grazie alla stampa 3D, questa stella marina unisce fascino oceanico e design contemporaneo. Le sue texture ricche di dettagli richiamano forme naturali scolpite dal tempo,…
I used ironing on all top surfaces and color change at layer 11. Created by Catalina Montes from the Noun Project
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed
If you encounter any issues, please let me know, and I'll update the file as soon as possible. If you would like a Commercial license to sell printed versions please sign up to my Patreon: https://www.patreon.com/Decorartor This elegant…
We recommend using asa or nylon for strength. Assembly is by gluing with two-component epoxy adhesive.Fill with lead balls inside. Once completely filled, there should be about 10kg of ballast (22 lbs).
Head for Omer 100 Excalibur harpoon, printed in ABS
- Print in place - 10-15% infill - easy to print
Hydrocynus goliath (Goliath tigerfish) is a freshwater fish in the Congo River Basin. It mostly eats fish, but like any other animal, when times are tough they'll eat anything in the water that moves (including people, though rarely)…
This dock has been designed by Dodoradio for the AsteroidOS community.
really fun 3d print FOR DECORATION USE ONLY warning child 6 and under should not touch this because it has sharp edges. use tbu if your printing this for a kid younger than 6. use pla if your just printing it for decoration reasons.
Anglerfish Planter 3D printable model.
