428 models
Now also Avaidable as Damascus Steel and Slaughter . Crimson Web version of the Butterfly from Counter-Strike. To assemble it, you have to glue the ornaments on the Handle, or print the multi material version. The separator and the pin…
Just "discolored" remix with added brim on selected areas
I've quite a collection of Skyrim models and I have here uploaded a vew different files some from https://www.pepakura.eu/skyrim-full-daedric-armor-male/ and some taken from Garys mods. I'll upload the female version next so Hopefully…
Here are Skyrims daedric weapons. Print instructions Category: 3D Printing
Print Settings Rim Materials: PLA - quick and easy, but could break from UV radiation PETG - should be a bit tougher and less prone to failure Print Settings: Walls: 3 Infill: does not matter (should be solid at all parts anyways)…
Been seeing videos of everybody putting rims on their garbage cans. So i made some for myself. These are my version of some Dodge wheels. This print is 3 parts so there is no need for supports or multi material system. This wheel snapps…
Rims for RC car. Made in Blender.
Off road bogger and street bash style wheels, all in one tire/rim combo like Hotwheels 1$ car wheels. The outer diameter is standard hot wheels offroad tire sizes (13mm and 16mm) for .8mm axle (hot wheels dimension). The street bashers…
So i made some more rims and tires. This time for Sakura D4, but should fit any 1:10 drift/road rc. Two types in the pack 5 ray and 5x2 ray rim, both for 12mm HEX. Wheels shown are printed in Verbatim PLA and Fiberflex 30D.
Good luck Ricky, hope this is what your after and please post some picks if and when you print it. Please Check the sizing suits your needs also, Cheers Jace
After I didn't find anything suitable. I decided to design rims for my Speed Champions vehicles myself. I have therefore designed 8 different sets. In order not to put the same rims on everyone. There should be something for everyone. ;-)
Just some rims to add style to your Luba. With a hiding spot for your AirTag.
This is a great alternative for a Tundra Tire or larger Bush Type wheels on your RC plane. Print the Tire with TPU with 2 wall thickness and 10% or less infill. The rim can be printed in PLA with 3 wall thickness or so with 30% infill or…
____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
This is an alternative wheel design for the Landy Mini from 3D Sets ! I took the original model of the rim, and swapped the center section for a 5 spoke design. The reception of the axle and the tire are unchanged. If you like check out…
EDIT 2 Here are the 0.85" wide rims and tire for the front of your 2WD if you want that dune buggy look. EDIT 1 I added rim design 011 through 014. I also slightly modified rim 008 by adding an 0.030" fillet on the top edges. ORIGINAL My…
Designed for GMADE MT-1902, but will probably fit variety of other tires. Rim diameter is 49mm and width is 30mm (+4mm with beadlocks installed). Hardware: 1x SHCS M3x16-25 through the center 21x SHCS M2x6-10 for beadlock 3x SHCS M2x6 for…
A keychain, Recommended Printing Method (SLA)
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
My friend owns stunning Mercedes Benzs SL500 R129 with 5l V8. This car definitely needs some beautiful wheels and these RH AB Topline are stunning with no doubt. But he found out that wheel caps are with no typical diameter and original…
LİSANSI GEREĞİ TİCARİ AMAÇLI KULLANIMA AÇIK DEĞİLDİR. ODTÜ içindeyseniz baskıları benden temin edebilirsiniz. (instagram.com/olbia.design) DevrimSu is a riot control vehicle, ready to protect you from the unjust actions of the corrupted…
The Lego model 10330 - McLaren MP4/4 Senna - comes with tyres that are much narrower than the real cars. This model is based on @tomvit work, and provides separate parts for tyres and rims to be printed individually. For best effect, I…
In this Thing I have separated the rim and tyres for my Willys Jeep, so they can be printed in different colors and materials. Original Thing: https://www.thingiverse.com/thing:4834434 Category: Vehicles
More spare parts available: Air conditioning trim pack https://cults3d.com/es/modelo-3d/variado/air-conditioner-trims-for-seat-ibiza-ii I also have several spare parts for Seat Ibiza II: Spare hinge for the trunk tray:…
Catching up on some of my Skyrim files, Cheers Jace
I was looking for some entry and exit tiles to print for our Gloomhaven sessions but couldn't find any. Therefore, I created them according to the designs in Jaws of the Lion, Gloomhaven, and Frosthaven rule books. These tiles fit the…
This is a model from the game Crimson Desert. A sealed artifact from The Abyss. Which I recreated with the same engravings. I made two variants, one with smooth edges on all the engravings, the other is sharp (in the pictures it's the…
The VOLK Racing TE37 is a legendary forged monoblock wheel by RAYS Engineering , known for its lightweight, strength, and iconic six-spoke design . Designed for motorsports and street performance , it enhances handling, acceleration, and…
Hi with help of AI, I made swanga's rims.
I started with an STL i downloaded of the karambit, and then i edited it into 3 parts so you can print the middle out of metal if you want, and the left and right halves of the handle out of something else like plastic if you want. I…
A new body for the OpenRC You just replace the body parts from the OpenRC F1 with this body I have included hub caps as well to complete the look. This will work with 3D Printed Wheels and Rims or retail RC wheels as well. Support me on…
1.9" scale beadlock rims - Willys style (12mm hex) For each rim you need 5 M2 screws including nuts and one screw for fixing the front- and back- cover. Have fun. Print Settings Resolution: 0.1-0.3 Infill: 15-25% Filament material: PLA,…
The Crimson Firehawk appears prominently in Star Wars: Young Jedi Adventures . This model has versions for its appearances in Season 1 and 2. On the Season 2 version, the engines can rotate, the wings can fold up and down, and the nozzles…
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with treads for…
Give your LEGO® Porsche 911 (set 10295) the classic wheels it deserves! 🏁 Two iconic Porsche rim styles, made to fit the new 30.4×20 LEGO® tires: • ATS “cookie cutter” – factory standard on many classic Porsches • Fuchs – the legendary…
Some more awesome PDO's converted from Pepakura.com As always check the size suits your need and note this will need to be sliced up to suit your printer, Cheers Jace
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with treads for…
Because the original rims of LEGO ® Porsche 911 RSR set do not look like Porsche (Pic.3), here is my version of RSR rims and tires. For the rims I used black filament. The tires I printed out of flexfilament from Extruder. The…
I've designed this for a scale project of Icarus 280 bus. You can scale it according to your desire. I've pictured the DLP version, but it also prints fine on MK3
These are Drifting the WPL D12 very well, bone stock! Even better when upgraded Remix of a 1:10 scale RC Drift Rim (Source file/Author unknown; will 100% credit when I find it, Thingiverse) Remix of Gadoga "Tamiya M Chassis Drift Tire…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Help created with AI. New design Hope you enjoy Please leave a comment
For this model, I seperated the inside blade part from the grips and the six metal studs go on the grips. the blade and studs are designed to be printed in metal (but you don't have to if you don't have one of those printers), while you…
Update: Pre-cut vinyl stickers for the tires availble! https://www.thingiverse.com/make:1095612 In addition of Boyson-IPL's OpenRC F1 2022 remix, I designed Tamiya F104 compatible rims that look like the 18 inch wheel aero covers from the…
Two versions, 6c holds 6 decks of regular, sleeved cards, 5c holds 4 regular decks and larger materials such as the hero and enemy sheets of Shadows of Brimstone. This has been inspired by the Hold-It! card organizer. If you have any…
The laser-cut parts are made of 3mm stainless steel. 3d printed parts are made of ASA to last in outdoor conditions. Other materials may be used. The wheels are about 700 grams heavier than the originals (each). The extra weight will help…
Basic Chunky Tire with several sizes of rims. Scaled for 1:16 models.
Rims are inspired by classic Landy Rims
Paddle Tires and Rims for ARRMA Typhon Mega. Wheel hex size: 17mm Tires printed with Overture TPU Black. 0.20mm SPEED. 5% Infill (Increase if you need or want a more rigid tire). No supports needed. Rims printed with Polymaker PLA Pro…
For spools with outer diameter of 198mm. Inner diameter of the rims are 197.6mm - makes for a tight friction fit. Tested with 1kg of filament and works perfectly with no issues ever since installation. Consider using hardware such as…
Print ideally using signal white PETG; vanilla white PLA is also suitable. Since the spare rim uses cross axle and thus can not have a hubcap, you can either print 4 standard versions (with hubcap) + 1 spare; or simply 5 of the “spare”…
Intention was to have a tire for my gravity autorewinder (MMU). Could buy from Lego seller, but why not make my own tire. Printed in different hardnesses: Blue = TPU 85Sh(A) Black = TPU 60Sh(A), printed at 20-25mm/sec MAX! Red = TPU ca.…
I bought some crawler Wheels, but wanted to design some of my own, since i cant buy some of the same kind. If you really want to use them, you should print them in TPU and fill them with Donut shaped foam. There is also a Second split…
Printed in PCTG with supports. Robak car: https://www.prusaprinters.org/prints/119715-robak-2 Paddle tires: credit to SkippyMcSlappyPants for the great paddle tires design.…
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
Alabama Crimson Tide logo that I designed for a necklace. I use this chain for my necklaces. I hope you enjoy!
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Tyre - Tyre With Rims and Rims only (updated) Tyre for the Truck. or can be use for RC cars etc Print Settings Printer: Wanhao Duplicator 4 Rafts: No **Supports:** Yes Resolution: 0.2mm **Infill:** 10% Notes: Support was used as it was…
been reading/watching Ragna Crimson, so here's Ragna's siverine sword. split for smaller printers and fits a 1/4 in dowel. Category: Props
Anyone interested in the work of Daniel Noreé has probably not missed the fact that he has released - OpenR/C Formula 1. The F1 car can be printed in PLA and is designed so that everybody will be able to print and build it without any…
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
This is a WIP I did during 2020 (as a birthday present for my dad, his bike), and never got around to improving so posting as-is. It has “stretched spoke” wheels - which are printed flat (in 2 halves) and then flexed to their width, with…
The tire is the original from Daniel Noree. I made my own rims for 2022 look that fits with the tyres. 1 front and 1 rear in STL file. Printed in Marble PLA
improved design for better print ability and assamlby, also one alternative tire profile and rim design
I couldnt find any good wheels for my 150g combat robot that fit my chassis, had enough traction, and stayed on the hub well. So I made one. There are 2 models one for 2 O rings and 1 for 3, size 211 works best 212 can work (from harbor…
I recommend to print it with 100% infill
This is a part of our Wargame Bits XII : The Crimson Wings project! Subscribe to the project's landing page to receive updates and a free promo model right away! https://www.dakkadakka.store/the-crimson-wings Subscribe to the pre-launch…
Fits inside the wheel but may need a little glue to hold in place.
Instead of heading back to to dollar store for a replacement, I made some measurements and drafted out this replacement. The lenses were a bit of a bear to snap into place so you may consider scaling it up by 1 or 2 percent before…
The hole in the middle was covered with a 0.2mm layer to prevent supports in the hex socket. After printing use a knife and cut the hole open. Printed out of PETG but a hard TPU lasts probably longer. Print settings: 5 Walls 40% infill…
Rims are inspired by Range Rover Rims
Rim width 26mm. Diameter 52mm. For example, the tires from Tamiya including foam inserts fit. There are files from offset 0 to 10. For more scale there are files for brake-vents for all offsets.
i didn't like original lego rims so i designed some with a little inspiration from the internet i haven't copied them from any rim brand only the rear rims are tested yet Print Settings Rafts: No Supports: Yes Resolution: 0,2 Infill: 100…
I wanted an extended sidebag for token like grit, corruption, bleed and other status effects. There is also a compartment for cards that are not currently in use
Part of the Oni Samurai Collection. Detailed samurai armor inspired by Japanese oni legends, designed for 3D printing and painting.
A remix of the neat 1.9" 12mm hex RC rims that use an internal beadlock design to clamp the tire to the rim. Included are only my favorite bead ring as you can reuse the original ones if need be (go check out the original design, it's…
Hi everyone, i recently finished a 1/10 scale rally car with a Datsun 240Z Rally design body from Tamiya. But i just couldn't find matching rims. So i made some myself and would like to share them. These are made to look like the Datsun…
I wanted a token tray for a Shadows of Brimstone insert I'm trying to finish up. I only have 40mm of height left to work with so I altered BasHamer's design to make it collapsible. I also removed two of the token shafts, so the trays rest…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
I wanted to print HWelfare's Ferrari Enzo in 1/87 scale, but wasn't able to scale down the rims with all the detail. That's why I combined 2 spokes into one respectively. Please download the car body from the original model:…
Crimson Ghost skull tray. Perfect for holding guitar picks, spare change, etc.
This is a redesign of the 6'' inch Rimsaver made on the Floatwheel Original CAD provided by Tony. Some guys have already printed this type of design successfully. I don't guarantee that it will be successful on the first try due to the…
Another request from the guys in my wife's office. Designed for multiple color print (MMU2 or Palette), this logo is approximately 100mm wide and 6mm deep. I have the magnet hole size as 38mm wide by 4.5mm deep. Print Settings Printer…
Mini-Story The Crimson Eclipse Crown embodies the beauty of darkness: gothic roses, skulls, and mechanical gears unite as if a clockwork night is rising to claim the light. It is worn only by those who dare to face the elegant side of the…
A simple token for your backpack when you travel the Camino De Santiago.
This is a set of lens rims for an S10 respirator, intended for cosplay/decorative/re-enactment/airsoft use. They should snap-fit easily, but it might take a little bit of force, depending on filament and printing methods. Support…
Wheel centering made for Volvo/Ford and maybe others.TIGHT fit. and works well. 64mm inside dim 67,6mm Outside dim Printed on Prusa MK4 100% infill PETG
This is a request from PLG_Designs. He was gratious enough to ask permission to modify my design. I was only too happy to make the changes he requested. All the best with releasing your AMG Wheel mate. It looks great! Cheers, RamjetX…
— Updated with the brand new “KiwiFil Cardboard Companion” masterspool! :-D — Cardboard spools giving you trouble? This may be the solution for KiwiFil and other brands using cardboard spools! --- Spool rims --- Cardboard spools are great…
Hub cap for b5 alloy rims, off my 18" rims and not sure if it fits 17". Centre caps are readily available.
Remix with the rims at the same height as the mesh heads
I have included the Solidworks file to hold eight 4" coasters. I have also included a generic 3MF file that has an engraved logo in the bottom. If you wish to insert the A into the engraving then print the A from…
Custom Lego Technic rims (it is an old design so i don't know if the tolerances fit)
Unleash your dark side with this Crimson Demon Skull , a striking 3D-printable model featuring massive curved horns, deep eye sockets, a menacing skull design, and intricate surface details. Perfect as a Halloween decoration, a gothic…
A friend of mine asked me if I could do a statue of Big Al, the Alabama Crimson Tide mascot. Well, no. I am not well versed in organic modeling. And I couldn't find a pre-made file of Big Al, either. I couldn't really find even so much as…
You will need: 1x support 3x clips 1x Screw Printed in 0.2mm layer height with 0.4 nozzle
![Cardboard Filament Rims with Weighted Desiccant Core for Bambu labs AMS system [198mm OD]](https://media.printables.com/media/prints/463215/images/3799385_c966b918-4e49-4bd6-a343-ae8b3c7a6763/whatsapp-image-2023-04-26-at-105152.jpeg)
