27 models
This is a hot shoe cover optimized for the Multi-Interface Shoe that is being used on the Sony ILCE-7RM3 camera. Its probably also fits on any other of their cameras as well though. This model is designed to be printed standing upright…
Freestanding, heart desk ornament that when viewed from above spells "MOM" Added a stand to rm3dprintdesigns design
I created this cover as the original cover broke at the screw holders. This cover is a 1:1 replacement but with thicker screw holders so it shouldn't break there. Print Instructions Print object laying on its flat side. Add support…
The box is designed to protect you when you carry it in your backpack so you don't have to carry the whole bag.
For my first robot project I want to use the URM37 ultrasonic distance sensor from dfrobot. So the first thing to do was to design a good housing for the sensor and make it attachable to a servo. Category: Robotics
Simple case for the Storm32 Gimbal Controller. Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915 Unterstützte…
I made a quick stand for metaform3d's amazing Starfury model. Once you attach the fins the only way to put it on a flat surface is on its nose, and I didn't have any martini glasses handy. I know it doesn't attach the same way the cobra…
An MRM30x3 Zerstörer Turret for one of the fightmech vehicles by LeoCeballos. This is only a remix of the Zerstörer Turret as there are currently no models for one of my favorite wobbie-era tanks. You'll need to download LeoCeballos…
This mount is for attaching a Storm32 3-Axis gimbal to a F550 hexacopter frame. The arms are 66mm wide from tube to tube and the tube hole size is 8.3mm so its a snug fit on 8mm rods. There are two versions of the design, one with the…
Many owners of Ryobi 48v electric riding mowers (RM300e, RM480e and RM480ex) have now upgraded their mower batteries from the sealed lead acid batteries that the mower shipped with to much more reliable 48v LiFePO batteries, which the…
Building Platforms Stacker for Formlabs' Form2 ( & Form1+) (one platform per material avoid cross contamination). STL & STEP files are available here. Empileur de Plateformes de Construction pour Form2 (& Form1+) de Formlabs (une…
The Light version is optimized for everyday use, providing targeted protection for the keyboard and display while maintaining quick accessibility. The Full version offers comprehensive coverage, extending protection to the device’s ports…
BroadLink RM3 mount using a small poster Command Strip around the USB cable. Not recommended for applications where USB connection will be stressed. Opening in mount sized for the original RM3 USB cable (7mm x 10mm), may work for others…
Mini Talon Roll, Pan Brushless motors gimbal, Storm32 gimbal controller * DO NOT PRINT, x2 AXIS DON'T WORK AS EXPECTED THERE IS CROSSTALK BETWEEN THEM, CHECK VIDEO ATTACHED * Introduction and credits First big thanks and credit to Mark Q.…
This is a custom rear case for my PocketTerm35 Handheld. It was made in Fusion360 using the official 3D Model of the PocketTerm to ensure accuracy. Ive made it extra large to house: 1) Raspberry Pi 5 2) Official Fan 3) Official NVME SSD…
I use this simple bracket to mount my Broadlink RM3 behind my TV. My wall bracket has a nice nook where I can just slide in from the side and it holds it securely. The bracket will hold it upside down (by the USB connector) or right-side…
With this part you can fix the RC of your Dronavia Kronos MVC3 kit on the back of your DJI Mavic 3 Pro remote (model : RM330) Way less fragile than their fixation on the USB port. You only need 2 M2x5mm (M2x3 or M2x4 work as well). I…
Ich habe mir einen Bosch ARM32 Rasenmäher gekauft. Es ist ein praktischer und leichter Mäher. Was mich von Anfang an genervt hat war das dünne Griffrohr, und dass ich permanent den Sicherungshebel halten muss. Dieser Sicherungshebel ist…
I needed something to hold my RMs under my lounge with a bit of reach out
A case for the back of the Pocket Term 35 In case (ha!) you have butchered the back of your PocketTerm35, I created this mix of great cases to cover the HAT and whatever you are using on top of your Raspberry Pi 4 or 5. Waveshare did a…
A case for the back of the Pocket Term 35 In case (ha!) you have butchered the back of your PocketTerm35, I created this mix of a great case to cover the HAT and whatever you are using on top of your Raspberry Pi 4 or 5. Waveshare did a…
This is used when upgrading your RM300e to use a Chins battery. It fits the Chins battery charger which uses a variant of the Anderson connector.
Same steps as original, just modified to be parametrized using fusion 360. Just Open it in fusion 360, in the solid tab pick the upper MODIFY menu, and select change parameters and then modify as needed.
This will allow you to use a 2nd riser the the Silverstone RM32 case. You will need to use M3 Brass Inserts like these to make it work. Brass Inserts - https://geni.us/Z4sg2P (Amazon) I would recommend printing in PETG with a 15-30%…
Building Platforms Stacker for Formlabs' Form2 ( & Form1+) (one platform per material avoid cross contamination). STL & STEP files are available here. Empileur de Plateformes de Construction pour Form2 (& Form1+) de Formlabs (une…
BroadLink RM3 mount using a small poster Command Strip around the USB cable. Not recommended for applications where USB connection will be stressed. Opening in mount sized for the original RM3 USB cable (7mm x 10mm), may work for others…
ASA or ABS filament for printing because gimbal motors can easily get hot.
