Search results: roli

Aperolino

Aperolino "MK II" // *complete Rework*

01.09.2025: Danke @GBorni von Makerworld für das Erstellen des gif deines fertigen Aperolinos in Aktion! Das zeigt doch sehr gut allen wie simple es dann abläuft! 11.11.2024: Stößelaufnahme mit kleinerem Durchmesser von -0,15mm für das…

Aperolino MK2 // Ventilblock "Aperol" mit Leckage-Ablauf & Doppeldichtung

Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…

Aperolino MK2 // Ventilblock Prosecco für "sehr viele Marken" mit Doppeldichtung & Abfluss

Update 29.02.24: Grüße geht raus an alle heutigen Geburtstagskinder =)! Danke an @Hanno_1419514 für den Denkanstoß zu der guten Verbesserung die Ventilblöcke einfach unten offen und komplett ohne Infill zu drucken! → (Prusa Slicer) Die…

Aperolino MK2 // Ventilblock "Wasser Glasflasche" mit Leckage-Ablauf & Doppeldichtung

Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…

Aperolino MK2 // Table clamp with M16 screw (Size: S, L)

Update 30.12.: Length of srew optimized to 60mm so it fits on any thickness of tables used with the 2 clamps. Before there was a gap of table-tickness the one screw with the both clamps could not cover. Print settings: Clamp with no 4-5…

Aperolino harder spring

If you like this model, please throw me a like. Harder compression spring for the Aperolino to ensure tightness. I strongly recommend using PETG. Update (24/08/23) Design optimized to increase the compression spring deflection with the…

2.5" HDD / SSD Caddy for HP ProLiant Server G5 G6 G7

This HDD / SSD Caddy Is fully funtional. It clicks in perfectly. It also shows the lights of the drive status. Compatibility It works on a HP Proliant DL360 G7 Server (Tested) but should also work on any HP Servers that use the same Caddy…

North Carolina, USA (NC) Topographic Map with Rivers

North Carolina, USA (NC) Topographic Relief Map with Rivers and Coastal Waters North Carolina, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…

HPe Server 2.5 Caddy 651687 gen8 gen9 gen10 Proliant

designed these to fit in the drive drawers for my HPe Blade center. not perfect but they work. they fit a wide variety of HP servers gen8-10. tried to make a version that was easy to remove, but kept the older model in case they really…

Carolina Panthers Logo

Carolina Panthers 1st Layer Blue 2nd Silver 3rd Black

Aperolino Ventilblock PET Wasserflasche mit Gewinde und stirnseitiger Dichtung

Ventilblock von Luisengineering abgewandelt mit einem Schraubverschluss um die leere Flasche mitsamt den Ventilblock aus dem Halter ziehen zu können. Als Dichtung kann de r Dichtring 20x3,1 vom Set benutzt werden, dieser dichtet einfach…

South Carolina, USA (SC) Topographic Map with Rivers

South Carolina, USA (SC) Topographic Relief Map with Rivers and Coastal Waters South Carolina, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…

HP Proliant GEN8/GEN9 2.5 to 3.5 TRAY CADDY, 661914-001

Adapter for HP Proliant GEN8/GEN9 2.5 to 3.5 TRAY CADDY, 661914-001 Needed to install 2.5" drive in 3.5" tray caddy Print with 50%+ infill for good screw holding 2 versions: solid and lightened

Stößelaufnahme Set (tight, normal, loose) {for Aperolino MKII}

Ein Set von verschiedenen Passungen der Stößelaufnahmen für den Ventilblock. Mein Problem: Bei mir ist es vorgekommen, dass mit Schwankungen beim Druck der Ventilblöcken manche Stößelaufnahmen-Dichteinsätze bei PETG von Firma XY gut,…

Velux Rolladen 230v Jarolift Wellenantrieb / Adapter

Mit diesen Adapter Teilen und dem Jarolift 230v Motor kann mann jeden Velux Rollladen umbauen. Umgebaut habe ich bei mir das Velux SK06 und FK06, diese betreibe ich nun mit einem herkömmlichen Rolladenschalter und mit einem Shelly 2.5…

HPE proliant gen9/8 drive caddy - 727695-001

Easy to print and assembly disk caddy for gen8 and 9 HPE proliant. (Possible 10, 11 and 12. But I can not guarantee compatibility because I don't have access to anything else than 8 and 9 gen.)…

University of North Carolina Sign

Simple 3D printable sign of the University of North Carolina logo

HP ProLiant ML150 G6 Drive tray 3.5" to 2.5" adapter

Adapter to fit 2.5" drives in the HP ProLiant ML150 G6 3.5" drive tray. Should also work for ML330, ML350, ML370. Confirmed by users: ML110 G7 Updates: 26 May 2019 - Added v3 of the adapter, just optimized it to use less plastic.

Aperolino Flaschenhalter 219mm

About a like and the posting of a make I am happy! Happy printing :)

Pro-Line 6x30 12mm Hex Adapter for Robak | ProLine

The HSP 108015 axle shaft has a thread that is too short to use it with the original adapter. I reduced the thickness of the hub from 4 to 2.2mm. See drawing. That blind hole is there on purpose. Helps generating supports better. Remove…

Aperolino Soda Stream Bottle Adapter

Out of a comment under the Aperolino, i decided to change the design to an soda stream 0,6l glas bottle. O-Ring: 24mm https://amzn.to/3QMhSzg https://www.youtube.com/watch?v=p2EYFeVhTlQ&t=7s Made by luisengineering1

South Carolina Gamecocks Oversized Necklace Logo

South Carolina Gamecocks Oversized Necklace Logo that I designed. I hope you enjoy!

HPE ProLiant MicroServer Gen8 2x 2.5" HDD Bracket

This is HPE ProLiant MicroServer Gen8 2.5" HDD/SSD bracket. Print instructions Category: Electronics Summary This is HPE ProLiant MicroServer Gen8 2.5" HDD/SSD bracket. Print Settings Printer: Rebelix X2 Rafts: No Supports: No Resolution:…

Skadis Battery Mount - AEG Prolithium-Ion 18V

Uploaded new version: Improved fit. I printed mine upside down in PETG. Prints without support.

Microlight print head for Rat Rig V-Core 3/3.1 printers

Microlight 3.2 Very light and rigid print head for a V-Core 3 printer. The top plate and front plate are now printed as a single item. There are several other small detail changes. The integrated top/front plate offers several advantages…

Carolina Panthers Logo

Multi-Layered Carolina Panthers Logo

HP ProLiant MicroServer HDD holder

HP ProLiant MicroServer HDD holder

Carolina Panthers Oversized Necklace, Pendant

Here is the awesome looking Carolina Panthers Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…

Traxxas Slick Proline Tires

These tires #10188 will fit the Traxxas proline style rims. TPU is best and I did 4 walls at 25% infill for added durability but they are a bit stiff. I will try fewer walls and 10% infill and see how they hold up. They will print faster…

Traxxas Xmaxx proline ford raptor body tail protector

Specialy for the proline xmaxx body you need only 4 screws m3 or m4 20mm long

HPE ProLiant ML110 G10 4xLFF HDD CAGE

Since the official HPE price for a 4xLFF cage exceeds €200 in my region (Slovenia | EU), I decided to make my own. My server already has an 8xSFF HDD cage, so I designed an additional cage for LFF drives to prevent them from being stacked…

Roof Skids for Proline Brute Body (X-Maxx)

Roof Skids for Proline Brute Body They attach through the body support. Drill a 3mm hole through the 4 holes in the body support through the roof. Required: (4) M3 nuts (4) M3 x 20 screws Category: R/C Vehicles

Improved Aperolino block and valve

Needs

Aperolino tube adapter 6mm to 4mm

If you like this model, please throw me a like. Adapter for the Aperolino to use a PTFE 4mm tube, which is common in 3D printing, instead of an 6mm tube. PTFE is usually food safe, but I can't guarantee anything. Use at your own risk!…

Bambu X1/P1P/P1S Bed Plate DXF - For cutting stickers / garolite / etc

Update 8/21/23 : Realized I had the wrongly scaled the DXF and it was 10x size. Fixed that in an updated version here. Just a simple DXF that gives you the dimensions for the Bambu plate geometry. Useful in cutting applications.

Bruder Lever/Hodrolic Compatible with 44002

This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Not very detailed, as the original is but it's good enough for a functional part and my boys don't…

South Carolina Palmetto Tree

This print is the South Carolina Palmetto Tree and Moon that is based off the state flag.

Proline Secure-Loc Cap Replacement

Man. Those Proline Secure-Loc Caps are really expensive! Good thing you can 3D print your own. I've made two versions. The first one is compatible with a 7mm M4 threaded heat insert The second one has a 4mm hole that threads directly on…

Aperolino Rueckstellfeder

Die Feder Stellt die Mischrinne zurück, um Nachlaufen aus Rinne zu verhindern.

REMIX Aperolino "MK II" Gehäusebeine

Remix der Gehäusebeine, damit man diese direkt auf ein Holzbrett schrauben kann. Ich hab die STEP Datei hochgeladen, dann kann jeder das für sich noch anpassen bei Bedarf. Das Modell ist die rechte Version. Für linke Version einmal…

ProLine LST2BK Speaker Stand Clamp

This is a replacement clamp/clutch piece for the ProLine LST2BK speaker stand, which has an outer tube diameter of 38mm (lower part of stand) and an inner tube diameter of 35mm (upper part of stand). There is an M6 nut and bolt that clamp…

12mm hex "zero offset" 6x30 proline style wheel inserts for Traxxas Slash 4x4 or 2WD rear

There are cheap RC Short Course Truck wheels on Amazon that come with different hex and offset adapters but are inconveniently missing the “0 offset” 12mm hex inserts necessary for the wheels to fit under a Traxxas Slash 4x4 body. I…

DVD drive QR bracket - Proliant Gen8 Microserver

I recently bought a HP Proliant Microserver Gen 8 which had already had the slim DVD drive replaced with a 2.5in drive caddy. It was hot glued into the chassis which made quick removal difficult. I designed this bracket to attach using…

North Carolina Tar Heels Oversized Necklace Logo

North Carolina Tar Heels Oversized Necklace Logo that I designed. I hope you enjoy!

Carolina Hurricanes Hockey Puck

No adhesion, supports may be necessary

Carolina Hurricanes Magnetic Logo

This is a small magnetic logo for the Carolina Hurricanes. It fits 6x3mm magnets. About 20 mm x 25 mm.

Carolina Panthers Football Helmet

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

14mm 6x30 Proline wheel adaptor

The Proline Wheel Adapter is designed to fit wheels with a 14mm hex and a 6x30 bolt pattern. Print in Petg or ABS. Please leave feed back for model and i can update

South Carolina Photo Stand

This photo stand is perfect for anyone who loves South Carolina. No support required!

Carolina Hurricanes Oversized Necklace Logo

Carolina Hurricanes Oversized Necklace Logo that I designed. I hope you enjoy!

Carolina Panthers Plaque Multi-Color

www.patreon.com/bkprint3d

Cybele by Rodin, 1889 - The North Carolina Museum of Art, Raleigh, NC

This is a scan of the sculpture 'Cybele' ) by Auguste Rodin, currently on display at the The North Carolina Museum of Art in Raleigh, NC . This model was originally modeled 1889-1890, enlarged 1904-1905, and finally cast in bronze in…

Proline Rubicon Side Window Armor

Simple (side / rear) window (mesh / grill / armor) for your Proline Wrangler Rubicon 3336-00. Use 4x M2.5 screws on the corners of each side or whatever floats your boat ! The recessed "tube-shaped area" or whatever you call that(please…

HDD / SDD Cady / Tray for HP ProLiant MicroServer Gen10

I got a HP ProLiant Gen10 Server second-hand with missing screws for the HDD. These specific screws should be T-15 Torx 6-32 UNC. Also, I couldn't find a model that fits. To help myself, I created my own caddy. There exist 2 version, HDD…

University of North Carolina Tar Heels Football Helmet

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

Sash Lift - Andersen Narroline Double Hung 1630409

If you have old Andersen windows and the sash lift in the bottom pane broke, here's a model for your replacement. It has a good fit - not perfect, but I was happy. I tried to replicate the original as close as I could. Printed it with…

South Carolina Gamecocks Football Helmet

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

Proline Secure-Loc Turbo

Not really a remix of Niko.hogh's model, but I figured it'd be a good idea to have these models linked. Made for a M4 threaded insert. I let the insert hang out a little to space the turbo up slightly, and keep from scratching the lexan.…

Aerolink Lamp

A simple desk lamp, made out of PLA, printed in parts, large parts like the arm require support when printing and will need super glue, while other just slot in. There is only one file which can be imported as single object or multiple…

Cascadia Roling Hills and Rivers Insert (fits sleeved cards)

Some quick and dirty tweaks to @JasonHartley_1614050's great insert to fit sleeved cards. I used Sleeve Kings sleeves. Print one for Rivers and one for Hills!

carolina keychain

Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: lug_text_distance = 2 outline_color = Gray…

Brudert Hydrolic Piston Compatible with 44003

This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Not very detailed, as the original is but it's good enough for a functional part and my boys don't…

North Carolina A&T coaster set with box

A coworker saw my work and wanted a North Carolina A&T set. I did two different designs. I like them both. The bulldog was done by converting a PNG to DXF, importing into Solidworks and extruding. The Solidworks file for the box lacks a…

Carolina Panthers Oversized Necklace Logo

Carolina Panthers Oversized Necklace Logo that I designed. I hope you enjoy!

South Carolina flag (no MMU required)

This is a simple two color print for the flag of South Carolina. Start printing in blue and switch to white at layer 16 (0.2mm layer height). See the included gcode if you don't know how to layer switch. Let me tell you, tracing out that…

Carolina Hurricanes NHL Hockey Puck Alternate Logo

Hockey pucks of Carolina Hurricanes Alternate logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…

frontal proline hilux

crawler

Carolina Panther HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Pro Blue Transmission Distance: 1 PLA PolyLite Pro White Transmission Distance: 5…

South Carolina Gamecocks Oversized Necklaces Alternate Logo

South Carolina Gamecocks Oversized Necklaces Alternate Logo that I designed. I hope that you enjoy!

Spring's Fluffy Frolic (Easter bunny - vase mode)

Each hop, a burst of spring's joy; the Fluffy Frolic with its play and cuddles brings laughter and warmth to the heart. An adorable springtime spirit hops into your Easter celebrations, spreading joy and whimsy all around! Complement your…

Aperolino Stößelaufnahme mit Rändel

Mir ist die Demontage der Stößelaufnahme zur Reinigung schwergefallen. Daher habe ich ein Rändel hinzugefügt.

Carolina Hurricanes Oversized Fan Chain

Whip up some serious fan energy with this Carolina Hurricanes Oversized Pendant / Fan Chain ! Whether you're hyping up PNC Arena, throwing down at a watch party, or just repping the Canes on the daily, this oversized chain pendant makes a…

Carolina Skiff Keychain

A keychain resembling a Carolina Skiff 218. It prints well at .2mm and preferably tree supports so they are easy to remove from under the canopy.

Carolina Hurricanes 2026 Mini Stanley Cup with Logo

Picture is a prototype build, still working on settings. I think a random seam would look better. Supports should only be needed at the edges of the logo. Also including separate files for base and cup. Some filaments seem to have trouble…

Rolingbox

A box to keep your smoking equipment, tabacco and make rolling easier. This is my first 'complicated' model :) If anyone has any improvements let me know. I printed it with 2 layer ceiling and floors, 10% infill. Hope it works…. and…

Cascadia Roling Hills and Rivers Insert

A simple insert for Cascadia Roling Hills and Cascadia Roling Rivers. This insert works with both games.

Carolina Panthers Helmet

Close to full scale Football Helmet

Creality K1 Universal Bed Plate Guide (cryo grip, biqu, magnetic, G10, garolite)

I often print on regular magnetic bed plates and also some piecies of garolite g10. To install g10, i needed to always unscrew the two guiding bolts to put it, then screw them back when i needed to use magnetic bed plate again. Now i…

Limelight Frolic Loading Funnel

Basic loading funnel for the Limelight Frolic Thermal Extraction Device.

Caroline Munro "The Golden Voyage of Sinbad" (1973)

Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.

Carolina Panthers Ornament

I made this ornament as a gift for my brother in law. He loves the Carolina Panthers! I wish I had the right filament color at the time to make a three-color print. I did make it in two colors by pausing the print and changing filament…

Jarolift Remote Control mount

A simple Jarolift Remote mount where you can still use the controls. To mount it, you can use 2 small countersunk head screws

Jarolift Merten 1M Adapter

Hello, after the radio transmitters did not hold on the original Merten frames and fell out to the front, I made some myself with a press fit and they work well. Hallo, nach dem bei den originalen Merten Rahmen die Funksender nicht…

North Carolina State Wolf Pack Football Helmet

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

Linville Gorge North Carolina USA - Terrain2STL

Linville Gorge, North Carolina. Great climbing and bouldering in the Ashville area. Courtesy of the amazing tool Terrain2STL For best results print standing on end in spiral vase mode. Then you can just trim away the bottom and sides with…

Proline Fridge Door Handle

One of our customers asked us to repair their fridge handle, so we redesigned it with Fusion 360 and printed it. Don't know exactly which model is it, but it's a Proline Fridge. Hope it will be useful. Print it with the screw holes facing…

Rolion Merchant D&D miniature

Original character model in the style of tabletop miniature to display a freeze frame of a lion/lioness merchant.

strangers things farolillo

farollillo navideño facil de montar i de intercambiar tanto luces como pilas como imagenes ahora tambien com pokemon navideño y imagenes de strangers things haz una pequeña mueca con las tenacillas para que encaje descargate la plantilla…

Carolina panthers jibbit

print at 80% infill, recomeded to switch filliment at the features. turn on supports and flip in slicer.

North Carolina Old Well

This is the very historic Old Well located in Chaple Hill North Carolina, home of the North Carolina Tar Heels.

limelight frolic split case with mouthpiece cap, button, light and stealth covers

cover up that frolic with bumpers and a split case for travel. print in tpu 95a

Carolina Parrot Figurine

1:1 scale model of a Carolina Parrot. The model features detailed feather texturing along the model. I recommend printing it at a finer layer height or with a resin printer. The files are pretty large, they may take a while to load.

HPE Proliant ML150 Gen9 3x3,5" HDD adapter

HPE Proliant ML150 Gen9 3x3,5" HDD adapter Adaptér pro instalaci 3ks 3,5" HDD do prostoru pro 4 HotSwap disky 4ks HeatInserts M3 x 6 x 4,5 4ks šroubky M3 x 6mm pro montáž adaptéru 4ks šroubky W 6/32 x 6mm pro každý z disků (průměr hlavy…

Paroliere

Gioco da tavolo con dadi x tutti

Herakles, 2nd Century - The North Carolina Museum of Art, Raleigh, NC

This is a scan of the 2nd century sculpture 'Herakles' , currently on display at the The North Carolina Museum of Art in Raleigh, NC. From the site: https://learn.ncartmuseum.org/artwork/herakles/ Excavated in the Roman Forum in 1771,…

Neem Karoli Baba

neem karoli baba idol

Caroline Munro "At the Earth's Core" (1976)

Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.

Body guard Monster Slash Fusion (Proline body)

Back down-back up. Front down-front up. Bolts required for fastening: M3x12-14mm 7 pcs. Proline MONSTER FUSION BODY PETG best material.

HP ProLiant MicroServer N36L - 3.5" HDD holder

Holder for 3.5" HDD disk that is inserted instead of the original CD/DVD drive. There is no need to screw the disc, I just recommend inserting cardboard to dampen the disc at high speeds as seen in the photo. Printing without supports,…