Counting matching models…
In order to find the perfect fit for your setup, just print a bunch of these with different scaling in Y/X-direction (+/- 10 %). MicroMax Standard The card is recessed by 6 mm and will fit every typical card slot. I tested these with my…
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
Roman Terrace Garden for your succulents? Yes, another succulent planter for your desk or home. The raised middle container is a great mid level water feeder to the side containers. This was printed using Gray PLA at a resolution of 0.2…
Romantic Couple Decor . Feel free to scale it as desired. Fast and easy print. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 Happy printing! With more and more questions…
Necromancer Bust Image to image → Create Prompt → text to image → Image to 3d. Third Attempt. Used the best quality output the site had to offer → UV displacement → Sculpting out shadow distorts → offsets in meshmixer → fixes in…
Roman Garden Villa for your succulent? Yes, another succulent planter for your desk or home. This was printed using Wood PLA at a resolution of 0.2 and 20% infill. There is no need to use supports when printing. All the over hangs are…
i printed it with 4 walls and 20% infill, so i got some heft to it. This design is for personal use only. For commercial licenses, visit: 👉 https://thangs.com/designer/LeHa%20Design
an old coin model, representing the silver denarius from the roman empire also for the best quality, print to for each side and glue them together
This is my fourth iteration of the fiendishly clever walking toy invented by my friend John Jameson back in 1981. It mechanically gears a spinning gyroscope (made of 104 pennies!) to a cam which pushes a pair of feet up and down. When one…
Clock Numbers - Roman Numerals 1 - 12 Čísla hodín - rímske číslice 1 až 12
This interlocking hearts decoration is a clean and elegant 3D printable model symbolizing love, connection, and togetherness. The smooth heart outlines and solid base create a timeless decorative piece that fits beautifully in modern,…
This was an experiment using an AI 3D model generator called meshy.ai The results were pretty neat! Not the highest resolution, or cleanest, and I had to make sure the bottom was flat for the print bed, but for a free model generator…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
i amde this remix for dummy 13 figure, i added a handle and changed the scale that it looks good on the figure printed in 0,07 mm printed with supports glue the handle into the little slot on the side
A skeleton without an evil will to drive it is just a pile of bones, so here's a Necromancer. Or a dark mage. Or even a good mage with an attitude. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints…
Made this Roman dodecahedron for my collection of peculiar objects. It follows dimensions from this paper: Une fouille en bordure des thermes de Jublains (Mayenne) : enfin un dodécaèdre en contexte archéologique ! From wikipedia: A Roman…
Inspired by the domed Ancient Roman Architecture. There are four large vent holes that empty over flow into the courtyard. The base is 120mm x 120mm and can easily be scaled up for larger plants. Printed with the fine matte wood color PLA…
Roman Coliseum with good details to 1:500 scale. The Coliseum is scaled and divided into 4 parts so that it can be printed on any 3D printer with minimum print measurements of 220x220x250 mm. PRINTING PARAMETERS Material: PLA Layer…
When Roma's enemies hunker down behind trenchworks and fortifications, the legates do not call upon the Triarii to break the walls but the Combat Sappers. Storming from freshly excavated tunnels these men and women fill trench ways full…
UPDATE 2023-12-20: It appears I ended up uploading my modelling files instead of the models. If you downloaded .fcstd files, please download the new files. Sorry for the confusion! Uploading because the Dorformantik-Community has been…
Verschiedene Hilfsmittel für das Brettspiel Dorfromantik
I've been using these card grips by FH for some time and now recently i accidentally broke off one of my SD cards, destroying it beyond repair. The regular grip creates a relatively long lever so if you hit a card that is plugged in…
A decorative cylindrical container in the shape of a Roman/Greek column that I designed for holding my Chess figures but can be used to hold anything that fits inside. It is made from 2 parts (the main body part and cover which screws to…
A geometric design catch bowl. Enjoy!
It is a sad fact of life that the enemies the Roman legions must face often taint and defile the ground the wage war on. Millennium of experience has taught the legio that flame will burn away even the worst of the rot! If you would like…
A master of the undead arts but overall nice bird. A funny DND idea I had. Collect them all! Over 20 Owls available!! COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Tree Supports on build plate only…
This is a major revision of my previous dodecahedron. Pegs are now threaded with ridges to keep them in place. Living hinges allow the panels to fold into shape and snap features lock them together. Over 100 of these dodecahedrons have…
The Roman Villa Garden Tower is part of the Roman Villa planter series. Enjoy. This model does not require any supports and all overhangs are easily bridge and properly arched. This sample was printed using Gray Overture Matte PLA I…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
3D-Scan of a beautiful flowerpot bust with an ancient greek/roman motive. Best prints with tree support.
Roman gladius, prints in parts, fits on Prusa Mini. If you print pommel with high infill/wall count the gladius will be balanced. Parts are numbered. Test the fit for pegs, should be tight. rescale them if need be. high wall count/infill…
Column in ancient Doric order style. Use for support, display, leg or whatever. It is 100 mm tall. Scale it in slicer to your liking. I have mine as graphics card support in my computer, scaled to 77.5% to make it 77.5mm which fits…
Simple roman pillar designed for a temple I am working on, should print fine with no supports
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
In Dorfromantik, some tiles have printed flags and must be taken into account during the game and in the final scoring. These flag figures make it easier to see the flags. We play it so that we place the flag as long as it is not yet…
Front: Laureate head of Nero right, lightly bearded. Lettering: IMP NERO CAESAR AVGVSTVS Back: Jupiter seated left on high-backed throne, holding thunderbolt in right hand and grounded sceptre in left. Lettering: IVPPITER CVSTOS Gold;…
Romantic gift for Valantine's Day. Model needs support. Careful remove the supports.
These Composite Ionic-Corinthian style pedestals bring classical elegance and feature a concave sided top block abacus, fluted shafts, crisp corner volutes, with both cylindrical and squircle column forms. Offered in short and tall…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
Our 2023 RAM Promaster Van has 3 cup holders below the console. They are hard to reach and do not hold our mugs. We have a cell phone holder, but not the wireless charger. This model easily slides over the cell phone holder and rests on…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
A Necromancer Mind Flayer. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Modern style fruit bowl with an optional insert! I still can't decide if I like it more with or without the insert. Takes a firm push to get the insert in. Don't worry, you won't break it🙂
The Historical Chess Set Series #10- Romanian Bundesform Chess Set The Romanian Bundesform chess piece design is a unique and distinctive style of chess piece that originated in Romania in the early 20th century. A cylindrical shape with…
This is a 3D scan of the statue of the Roman emperor Trajan ( http://en.wikipedia.org/wiki/Trajan ) in the New Carlsberg Glyptotek museum in Copenhagen, Denmark. I found the model here:…
Some minor fixes and slightly reduced poly - (unnoticeable to the untrained eye) "Necromancer Woman 3D printable" (https://skfb.ly/6XzpR) by RavenBonesMinis is licensed under Creative Commons Attribution-NonCommercial…
A detailed set of 3 classical architectural columns representing the traditional Greek and Roman orders: Corinthian , Ionic , and Doric . These models are ideal for tabletop gaming terrain (D&D, Warhammer), architectural dioramas,…
Height is <13cm, width at the base ~14cm. If printed in fine resolution (0.1mm) at 100% that might take 2d or more. Print with supports recommended. The opening at the center is cylindric, exactly 100mm in diameter and 125 mm deep. The…
Rack de rangement de feutres ProMarker. Versions 30 et 60 feutres prévus pour s'empiler sur la boite dont je disposais déjà. Facile à imprimer. ProMarker marker storage rack. Versions of 30 and 60 markers designed to stack on the box I…
Wreak historical havoc with this working Roman catapult — a miniature Onager, named after the wild donkey for how violently it kicks when fired. Designed for real torsion-powered launches, this siege engine adds a touch of ancient chaos…
This bear with heart balloons sculpture is a charming and slightly ironic decorative piece, 3D printed from matte black plastic. The small seated bear holds two heart-shaped balloons, creating a contrast between a cute, childlike motif…
Printing The model has two parts: The SPQR text between the laurel branches The pedestal support Both of these can be printed in place. I've tested them with 0.2mm and 638.27% scaling (this makes the SPQR text 4 mm thick). For printing…
Romantic Skeleton Couple Wall art
Use with cotton pads and essential oil. You can slow evaporation by closing the regulator slits and adding water. e.g. Lavender oil against clothes moth Citrus oil for a fresh scent against smoke Pine oil for some nature forest feeling…
A Necromancer. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This printable helps you organizing your village in "Dorfromantik: The board game". Never make a complete mess again by accidentally touching a plate in your village. All parts can be connected to each other to create the shape necessary…
This model is compatible with the lego system.
This is the Necromancy of Thay Book from Baldur's Gate 3, (mostly) 3D Printed! This prop is intended to be made with mixed materials and fabrication processes, but is mostly 3D printable. A full (albeit poorly organized) writeup of it can…
This model is a remix of the https://www.printables.com/model/68427-modular-clock model. It has a vintage roman face and matching hour and minute hands. You can print the remaining parts from the original model. Use this setting in…
The Roman Colosseum is one of the most well-known structures in the world. It's a relic of the ancient world.
Frog negromancer adventure miniature
This is a roman pugio with an 8-inch blade. This has a gladius style grip and is a 3 part assembly. It requires glue to hold. there will be intentional lines on the model that indicate what separates wood from metal. The painted pictures…
This model was created/remixed to add the option for Storz holder, which can be used for variant B and C. I recommend to print it in PETG with supports (for the screw holes).
This is a small succulent desk or table top pot with slight roman styling with the outer pillars. This was printed with 0.2 resolution and 20% infill and 3D Mars Wood PLA. The PLA was then stained and clear coated with a satin spray.…
A Necromancer Female. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Leave a like if this model helps you! This is my take on the Dacian helmet Sculpted in Blender and now Manifold so it can be printed!
Abstract Romantic Couple Sculpture Printed with fuzzy skin effect. Fuzzy Skin: All Walls Fuzzy Skin Point Distance: 0.2 Fuzzy Skin thickness: 0.2 If you're interested in the commercial use of my models, check the link to my Patreon…
🏛 Roman Style Fairy House – Miniature Villa for Magical Creatures 🏛 Bring ancient charm to your fairy village with this beautifully detailed Roman-style fairy house! Inspired by classical architecture, perfect for garden displays, fantasy…
This project uses IR sensors to detect when a ball is near then triggers a relay switch to the external power source letting current through the wire which pulls the ball away from the sensor and to the next magnet. No programming at all.
Front: Laureate head of Tiberius, TI CAESAR - DIVI AVG F AVGVSTVS Back: Livia as Pax, seated right, holding sceptre and olive branch, PONTIF - MAXIM Gold; 7,7 g; 19,4mm Print standing on edge with minimal supports at 0.1 for the best…
Want some cool accessory for your cat? After printing you'll have a roman cat fighting for the S.P.Q.R. Just assemble everything (better stick "aufbau" and "helm" together) and glue some feathers on top of it. After assembling "visier" to…
A playful winged heart toy with the word “YOU,” 3D printed from matte plastic with articulated arms and legs for a fun, expressive look. This charming decorative piece combines cute character design with a romantic message, making it…
This is another in the Roman Villa Garden Series. If you like this, then check out my other models. This was inspired by the painting also included below. Does not require supports (even if your slicer warns you) 0.2 layer with 20%…
Printed on a Creality Ender 3 with supports, with white Hatchbox PLA. In terms of post processing, I removed the supports from the bottom of the sword and sanded it down with some sand paper. While I used draft quality for printing this,…
This is a 3D scan (Artec Spider) of a sculpture of Agrippina. There is a color PLY model and an STL file. I edited the original a bit by smoothing some areas, orienting it and i made a flat base. The original file is from:…
This remix of the "Stackable Shipping Container Desk Storage Compartment" by 3D Mieks features the Chromakopia logo from Tyler, the Creator's new album on the side of the container. It retains the original stackable design, functional…
Roman Helmet Business Card Holder. I would put the cards in vertically instead. I'm honestly triggered right now looking at them in this position, but my modeling software just struggles with intuitive Arrays on a curve. Large Print.…
The Part is as a Base for your Sculptures Feel Free to scale it your way in all Axis XYZ the STL is clear so easy rto fit to a CAD or Blender sculp like Programm Please give me a like and a download
System of gears - model for the wall As you may have noticed, many of my designs include gears. I simply like gears, their movement and work. So sometimes I design such a model. In this one, 17 gears rotate at once The assembly…
A simple bookmark that shows a Roman gladius on the outer face and which uses a fin to separate a book's pages. An easy print, this should be fun for lovers of ancient or military history. The bookmark works best on paperbacks but it can…
🇳🇱 Welkom in Nederland! This model was designed by Dany Sánchez . Euromast is an observation tower in Rotterdam, Netherlands, designed by Hugh Maaskant, built between 1958 and 1960, specially for the 1960 Floriade , a horticulture event.…
If you want to hold paintbrushes or colored pencils, I recommend the Cubistand from sdmc : http://www.thingiverse.com/thing:1294085 I use it for my brushes and it was a great inspiration for me. Here is 3 different marker stands, for…
This is a semi-realistic looking version of a Roman gladius sword of the Republican or Mainz variety, depending on your source. I wanted to make a somewhat realistic Roman sword but most other 3D printable swords have very thick blades.…
A replica of Tyler the Creator's shipping container.
This is a set of Roman columns for use in 28mm gaming, such as Arena Rex . My contributions are to resize for 28mm gaming, to create the deformed versions, and to split the column into a hollow base and separate top. Original design is…
Necromancer with Helmet Bust
4 poses + armor variations. All 3 armor tiers, kriss knife, scythe. Also skullet haircut.
The source marked this model as adult content.
This printable design allows you to twist knobs and move a manipulator hand in the x, y, and z directions. The manipulator can be very helpful to actuate mechanisms otherwise difficult to manipulate at a macro level. We modified this…
I slightly adjusted the height of the cotton bud holder by Christoph Lehner from 71 mm to 100 mm total height so it can be used as a pen holder. A "damaged" version is available as well.
Roman Helmet copied from the museum in Olympia Greece.
Skeletons holding hands in a love that never dies. Three manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun Matte PLA Black) At…
Godzilla doesn't care about your holiday! Remixed this excellent coaster design into a Chroma Canvas image using black, bronze, tan, and white filament in a 150mm x 150mm square, which should leave plenty of frames to choose from. :) If…
The Gladius can be split upright with 10mm brim or horizontally lying. After printing, the two halves of the gladius are glued together with second glue. The helmets can be printed split without support and brime. After printing, the two…
Romanian 50 bani coin size
This is my first model, I got bit by the dummy 13 bug and had to try make a helmet that fits over the head, instead of swapping the head out. I ended up with a roman style helmet because it made my dummy look a little bit kayle-ish.…
Just use it to protect your dummy 13 in a fight.
Edit : I resized the reinforcement to make them fit easier. The note range goes from C2 to C6 This will be a long......... journey to print, glue, paint, varnish etc.. Mine is almost done... It start to play for real. For the Print…
