Counting matching models…
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D This is a cool DIY lamp project. The Magic Mushrooms, were intended to be…
Mario Mushrooms [multi print] no ams needed!
These mushrooms can be printed with a single extruder or be configured to print with a dual extruder for a cleaner effect. I also included the Poison Mushrooms body which has the 'Evil Eyes" if you want to try and make as many Mushroom…
Remix of SD-3Ds broom bracket with added screw holes. Please also check the original posting which has been recently updated. This remix here also received the stabilization add in V2. Which SD-3D implemented when touching the original…
Created from a Decorative Garden Mushroom using an Artec 3D Scanner. The model has been checked for holes and given a flat base for printing. This STL was pulled from their gallery of models located at…
Should fit most broom threads, maybe plungers as well. Test file included. Print upright no supports. Bed slingers might want a brim.
Vertical foregrips for 1913 rails modeled after the KAC VFG. No bolts needed, just align the grip body on the rail and tighten the grip screw. Print 1 standard or stubby grip body, and 1 respective screw. Print Orientation The STLs are…
These Squishy Mushrooms came to life while I was designing my Fidget Garden. After some brief research and consulting with my family, it was decided mushrooms were not a traditional garden vegetable so they were voted out of the planter…
This is a kitbash. All of the parts can be found separately on Thingverse. Category: Buildings & Structures
Used Poly.cam to scan a sculpture of a Fairy Sitting on Mushrooms. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here:…
Lego compatible broomstick accessory for Lego Minifigures
Halloween Decoration - Witch on a broomstick
I printed this using an orange/green/blue tri-color filament. It's trippy, man.
If you have a smaller 3D printer, Print 1 File at a time (2 prints total)
Every mushroom umbrella has its own "insert" with corresponding number. Every "insert" with an umbrella fits to every "stem" to make different combinations and more realistic forest. The fit between the parts is pretty loose, so you can…
This model was used as a sample model for Prusament PETG Ultraglow, the brightest glow-in-the-dark filament on the market. Read more about this material in our announcement article:…
The mound is basic because it was designed to have moss hot-glued on top. The mound and stems are hollow to facilitate adding lights.
This is for Peggy Perfect threaded broom Easy to print, I use NoBuFil PCTG Alu Gray with 0.4 nozzles, 0.2 layers and variable heights 6 perimeters and only 25% filling gyroid Happy printing and a happy wife Dies ist für Peggy Perfect…
Made a wall mountable for my outdoor brushes, although I think this model can be used to hang other stuff inside/outside. made two holes for centering the screws for mounting in v1 Made two bigger holes for v2 material i used was petg…
Sometimes one simply needs to have a way to store a LOT of phones. Maybe it's a classroom environment. Maybe it's game night at your house and you don't want your friends distracted (or cheating). Maybe it's a family gathering and you…
Collection of cookie cutter in form of mushrooms. Size can be modified +- 20% in the slicer. N joy
Regal has partnered with A24, to provide fans the ability to print their own Backrooms collectible popcorn container in celebration this unique film opening at Regal theatres May 29th. FREE POPCORN!!! If you print this out at full scale…
The thread is set to fit 3/4" ACME (see pictures), wich is a standard broomstick thread at least in europe. The thread has been carefully set though a LOT of dimension iterations. A simple version is uploaded to edit. A 120º full bracket…
Universal Broomstick Hanger Inner Diameter: 20mm Outer Diameter: 50mm Scale to your needs. If you like it, so give it a like here on thingiverse. And watch out for my other Designs: https://www.thingiverse.com/pakkko/designs Universal…
This model depicts Baba Yaga , the mythical Slavic witch, soaring through the air on her broomstick. It’s designed for 3D printing and can be used as a Halloween decoration, tabletop miniature, or fantasy collectible . You can print it…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
3D modelled spa from the anime Spirited Away with all the rooms inside!!! This whole model is in "Voxel" style so it is cubed. Inside the model there are real rooms like in the movie.
There are two versions: 30 phones (81.6x19mm slots, 250 x 207 x 70mm) Some phones with thick cases might not fit in this version. 16 phones (86x19mm slots, 176 x 166 x 70mm) This version has a lot of space for many phones.
We needed to stake a broomstick handle into the ground for a signpost we were making. For best results, print it ON ITS SIDE with some support. It will want to break apart if printed "pointy side up". For more about the signpost:…
Reupload from DasMia on Culta (current Printables user: https://www.printables.com/social/9303-dasmia/about).
Public domain mushroom model by squibblejack . Originally uploaded to Blend Swap .
Broomstick Coathanger Broomstick is 25mm Google: 25 millimeters = 0.984251969 inches Scale according your needs. I didnt have conical screws, but I made a chamfer for it for a more universal mount. V2 created on receiving feedback from…
~ adorable mushrooms to decorate your house ~ 🍂🍁 Autumn is almost here and this quick cute print will help to happen it sooner. Easy, only two color and knitted. Marvelous combo! UPDATE! To print these in two colors without automatic…
dranac73 did an awesome job to design the floor pieces for heroquest. As I decided to use OpenLock for RPGs terrain I adopted this beautiful work to OpenLock. I startd with the 4 most iconic rooms. They printed well, they should print…
This will allow you to use a standard broomstick or paint pole on a normal swiffer. the normal handle is super flimsy and I use the swiffer wet pads that can sometimes need some down pressure to scrub off a mess. using a normal broomstick…
This remix of Zack Freedman’s Hextraction Backrooms Tiles & Cards was done primarily to correct/update the rules text on the Backrooms Entrance Card & to remove the built-in sacrificial supports on both tiles as most printers should be…
A remix for broom sticks of 23mm diameter. Includes fusion360 file to adjust to your broomsticks
Printed in ABS at like 20% gyroid infill with 2 or 3 perimeters and it feels pretty strong
Bring a cozy, modern touch to your space with this set of mushrooms! Designed with a stylish contrast between smooth curves and a rich, woven rope-like texture, these mushrooms are perfect as desk decor, shelf accents, or seasonal indoor…
Bioluminescent is a natural phenomenon that never ceases to amaze, especially in fungi. This is a model inpired by the bioluminescent mushroom Mycenia Singeri and uses a glow in the dark filament. Keep your pot plants company with a…
if the screw breaks you have to change the whole stick, or use this spare part. The screw is tapered, so it should fit all brands.
The Scholar Gnome is a true lover of books and peace. Sitting comfortably on a mushroom, he’s completely absorbed in his latest read, radiating calm and charm. This beautifully detailed model adds a touch of magic and serenity to any…
It's a modular planter stand that is made only from 3D printed parts and standard broomsticks. This stand can be adjusted and designed as you wish by simply printing more parts or adjusting the height. For easy assembly I suggest to first…
This is a 3D printable version of the party game Two Rooms and a Boom! This set can be played with up to 38 players, and includes a hand picked selection of some of the best cards in the game. See more about the game here -…
I decided to print a TPU ring for the Gravity Broom Holder because my Broom was slick and it wouldn't catch. The orginal designer mentioned using a rubber band but I thought using TPU may last longer. I did try printing the gear in just…
'The Backrooms' is one of my favorite video curiosities, and as such, I decided to find, design, and print logos, door plaques, and badges. I uploaded a few photos of the designs that I ended up printing as of post, but some of them I…
This particular mushroom lamp has small fiberoptic accent mushrooms in the base and is best with different cap and accent mushrooms colors for variety and contrast. A 7-LED Neopixel jewel with fiberoptic adapter is installed in the base…
A small key for opening Initial-branded air fresheners/seat sanitiser dispensers etc.
A couple of autumnal mushroom cluster studs for @MagnumDanger's giant LEGO holiday wreath. I printed these with supports and finished with a little acrylic paint. Thank you @BishBoiii for the original mushroom model. Wreath can be found…
Two spare broomstick screws for 23 mm stick. Use a wood screw to secure the part (pre-drill hole).
This is a Complete set of Piece in order to build a Yagi-Uda antenna that is very lightweight and portable. complete with a pistol grip handle and separate piece for the BNC connector [not pictured]. there is even a cut-out for your…
PETG Layer 0.2 Fill 100%
Remixed version without a hanging hole.
I had the original grip design break when using it as a pump grip on a nerf blaster, so I made this version where the neck is solid and it uses a bolt to secure it to the rail, and the inside becomes a storage container. Hardware: M5 x…
Bonsoir ! Pour tous les fans de champignons (ou bien fan de Mario, qui sait), voici un keycap qui vous plaira ! Impression Ayant des détails, il est préférable de l'imprimer avec une imprimante SLA, mais libre à vous de l'imprimer en FDM…
Original model made by me in 202 (Anarky.3D Instagram) Feel free to use this however you want! I ended up painting the Floor Teal and clear coating, then gluing it to the main model. Roof slides just on top.
A remix of Broom Handle Bracket/ Broomstick Mount to accommodate 23mm width broom sticks.
Broomstick connection reinforcement for 25mm stick.
Mesiac som vytlačil z PLA žiariaceho v tme a čarodejnici z čiernej PLA. V tme pekne svieti.
Adapter for german brooms. The thread could have been a bit smaller. The insert for the broom could have been a bit wider. Please measure the diameters before printing. Feel free to leave your comments and I will try to make different…
Print the part face down for the best results! Please consider subscribing to the YouTube channel!
I made broom for dummy/ lucky 13 , there are two different brooms. Choose which one you like and get them cleaning.
Pin of the rear load cover shelf in my Skoda Roomster broke, so I designed and 3D printed a replacement part. More info in my video: BoM 1x Fischer Duotec drywall mount 1x shim/washer Remarks Print it with heat and impact resistant…
Some decor mushrooms. They can be printed separately and connected through a stick system. In order to connect them the parts have some space between them. The optimal size of this space depends on your printer but others had good…
A Backrooms-inspired caution sign for anyone trying to remain fully rendered in reality. AMS is required. Approximate print time is around 4 hours depending on your machine and settings. Hopefully this cautionary sign saves at least one…
Get the official Backrooms: Beyond Level 0 Roblox Bacteria! Please like this model! SFC Studios 2026
Simple 2D wall art - A Witch on a Broomstick If necessary, you can set your own size. With a layer height of 0.2, you only need to respect the height of the Z axis (0.6 mm - 3 layers - only 0.4 mm - 2 layers is also possible). Feel free…
These tiny angled high-walled shelves are built to link into each other so minimal mounting hardware can connect them to the wall and add together for greater strength. Each one has a single screw at the top but links into the shelf above…
The stick of my workshop broom has come loose. Then I realized that I don't have a matching Prusa design broom yet. Due to the filament consumption not cheap but a must for a Prusa printer Der Stiel meines Werkstattbesen hat sich gelöst.…
I was inspired by the song “My Lighthouse” by the band Rend Collective and wanted to work on my 3d modeling skills. So I designed a lighthouse and then added a base that would make it function as a nightlight for a more creative light…
my attempt in turning some mushrooms to low poly
Bring your woodland battlefields and forest dioramas to life with this highly detailed hollow tree stump terrain piece. Featuring deeply textured bark, exposed roots, creeping vines, and clusters of mushrooms, this sculpt captures the…
Cute handles for the Rudsta wide cabinet from Ikea. I used a small piece of cardstock as support instead of using supports for the handle opening. *Handles are even, my cabinet doors are not. :D Set a pause to lay down card stock as…
This pic grip requires M3 hex head screws and accompanying nuts. If you are using the broom stick as a primer I recommend printing the handle horizontal to the table and using 5 Walls 5 Top and 5 Bottom with 20% triangles infill. ( I use…
This design is part of my Mushroom Grow Tent (Martha Project). https://www.printables.com/de/model/968799-300-grow-tent-for-mushrooms-overview ------------------------- 2024-07-18: Created an extra controller for plants/cannabis that…
Astoroth Star amulet (Bedknobs and Broomsticks prop) just as seen in the movie.
it is a backrooms async explorer like in the movie ,I made it low polly
@basiclee3d 's broomstick bracket as seen on tiktok - used as a filament shelf for storage and filament spool holder ! Designed for a 1 1/8" diameter broomstick and M4*30mm wood screws were used in the video. The broom stick should be cut…
This is just a simple replacement thread for brooms. If you use a broom, you are probably familiar with this problem. The thin plastic thread, especially on the metal broom handles, breaks off and you have to buy a new broomstick.…
2 real Burgundy mushrooms - scanned
this is my back rooms model inspired by the first image of the backrooms. there are holes in the top which you can shine light through. when you look through the doorway in the front you'll hopefully see the backrooms. it prints with the…
Lip of the rear load cover shelf in my Skoda Roomster broke, so I designed and 3D printed a replacement part. More info in my video: Remarks Print it with heat and impact resistant material (I printed it using ASA, PLA won't do in a long…
it needs support on only a few parts but they are probably printable without the support. specifically what i needed support on were the peg leg, the coattails, and most importantly the hat. (i don't think i used support on the collar but…
layer 0.2, first layer 0.2 at a height of 1 mm (layer 5) pause or change the material to another color. I used a combination of yellow in the background and black for the information graphics/text It is of course possible to change the…
I was originally going to remove my old broken broomstick hangers, but realized I could simply re-use the channel mount and add a slotted extention to the gravity broom holder. This re-mix includes a channel underneath to slide over…
I wanted to have a Trident Sceptre for a Poseiden costume. I trialed and errored the threads to screw on a standard broom stick acme thread (¾"-5, I believe). I had found the shape elsewhere, but it was a pendant/medallion, but I wanted…
I wanted to make this using translucent pla so it blends in the background just like in the MV. You should listen to it.
I’ve been obsessed with the mushroom model featured in the Prusament Ultraglow promo, but I couldn't find the original files. That's why I used Meshy AI to generate a custom oyster-like fungi cluster, and I’m honestly thrilled with how it…
I didnt liked all the wallmounts for brooms i found online, so i made a new one. Its a wallmount for a broom. I even added one for smaller brooms, or broomlike appliances. Did i said the word broom already? Also, if the day comes, on…
Easy to print Witch in broomstick Pla Tpu petg abs are good for this print No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
With this tool you can place broomstick an the wall
drain the sanity out of your coins with this backrooms piggy bank!!!
[EN] With this hook you can hang for example a lamp or Christmas decoration without using a ladder. It fits on a broomstick with 24 mm diameter, and can be fixed with a zip tie. (details in the drawing) FreeCAD file included for…
Print a variety of cards for passing out at school or write/design your own. Easy to pull into CAD/TinkerCad and add your own message or write on a blank one. Utilize filament changes to incorporate different colors. Prints in under an…
Two Rooms and a Boom - Rugged Box for Print 'n Play storage Here's my attempt at a very thematically appropriate box to store all of your Two Room and a Boom PnP cards. I used 110 weight stock paper and Ultra Pro Gaming Sleeves (82712).…
In this playlist, I have compiled most of my relevant designs for a mushroom martha grow tent. I cover topics such as lighting, fans, humidity control, tincture, and many more. I hope this helps you keep an overview of the possible…
modelos impresos y probados en pla y petg, con un relleno del 8 a 15 % dependiendo de criterio propio imprimir todo a una altura de capa 0.2, solo Mushrrom circle a una altura de 0.12 para mejorar el detalle los ojos inprimirlos con una…
Here is a small honeycomb plant support table, made with Ø24 broom handles, I put several handle diameter versions along with the STEP files for easier modification. You can use any size broomsticks you want. Enjoy
![Mario Mushrooms [multi print] no ams needed!](https://media.printables.com/media/prints/69547e41-5f36-4173-a450-1d5a9c0288f9/images/12471363_02cebb75-4981-490f-a9b8-a66114d67c7b_7edf942c-9dd5-4dd9-8c05-14235391592c/2025-04-12_0898572d25f04.webp)
![Broomstick Spearhead [Kenteclaat Remix] (Modified threads)](https://media.printables.com/media/prints/586177/images/4677532_d3bc5908-5c4f-4b0a-b09f-c545092056fc/pxl_20230915_022558869mp.jpg)
