Counting matching models…
I wanted to improve my Fusion 360 skills as I have only started using it recently I thought, what better way than to design a series of pocket games that fit neatly into an Altoids (or similar) tin This is the first of many, tic-tac-toe,…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Etwas kleiner im Innendurchmesser, angepasst weil ich es so brauchte 53mm Außendurchmesser anstatt 55mm angegeben weil sie so besser in die Keramiken passt
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
holder toothbrush Toothpaste - Porte brosse à dent et dentifrice Paramétrique Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: Prusament petg Jaune Category: Bathroom
Print approx. €6.11–€7.47 excl. taxPreliminary estimate for PETGSource material: PET
Support pour brosse à dent murale. Peut accueillir une brosse à dent manuelle. Fixable sur le mur grâce à de la pâte à fixer. Pas de spécifications supplémentaires requises. Surtout, aucun support nécessaire ! Et n'oubliez pas : Everyone…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
This board game is for two players with respect to be small for transport ;-) The rules for game are attached inside images. When you would like to scale the game I generate it from JSCAD which I have to store as txt to upload it (.jscad…
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant
This is a drill guide to create a perfectly centered hold in a 2" PVC cap with a 1/4" drill. Then using a 1/4-20 nut and bolt you can hold a lacrosse ball in the end of the PVC cap and use light grit sandpaper with your cordless drill to…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Support la crosse technologie by Mika version 2
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
Support pluviomètre la crosse technologie pour pergola
Print approx. €12.86–€15.71 excl. taxPreliminary estimate for one variant
Holder for 4 electric toothbrushs Oral-B and 2 toothpastes. Support pour 4 brosses à dents électriques de marque Oral-B et 2 dentifrices
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant
30mm carrosserie ring met een 5mm gat in het midden. ik heb dit gebruikt bij een zeil vast te maken op hout
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Holder for 2 electric toothbrushs Oral-B and a toothpaste Support pour 2 brosses à dents électriques de marque Oral-B et une case pour un dentifrice.
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Je n'ai pas trouvé de pièce de remplacement dans le commerce. Celle ci n'est pas identique à l'originale, mais permet une attache propre de la coque avec un petit clip métalique tout en laissant passer la vis en son centre. Le fichier…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Erhöhung, gemacht für grössere Rollen (2,5kg) damit diese nicht mit Werkzeughalter und Z-Achse zusammenstossen. Viel Spass damit.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
A imprimer de préférence en PETG, des support sont prévu pour la partie ronde. 2 périmètres, 15% remplissage.
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
Tic Tac Toe in a box Easy to print without supports Print one base and lid, and 5x Cross 4x Nought Make sure you have 'print thin line' checked when printing Use some 1.75mm filament for the hinges Category: Games
I based my design on the Nike Alpha Elite lacrosse head. The lacrosse head was designed to be game/practice usable but it is possible to break the heads depending on what material you print it in. The head I printed out of nylon is quite…
Will need 1'' screws and anchors to mount to the wall. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Resolution: .2 Infill: 20 Filament: sunlu PLA gray Category: 3D Printing
Lacrosse bookmark. I have included the .stl and g-code files. Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .2 Infill: 20 Filament brand: Any Filament color: Any Filament material: PLA
This design is a remix of Metric Maven's Soccer Target over on Maker World: https://makerworld.com/en/models/621959-soccer-target#profileId-546028 These are perfect for dialing in those corner snipes, when printed in TPU these targets are…
I fully redesigned the model originally created by Ricor https://www.thingiverse.com/thing:4052094 Features Can be printed vertically, to ensure higher strength Screw holes are "water droplet shaped" to ensure great 3D printing Several…
This model can be printed both with or without support. I got the best result however with supported turned on. Would love to see what other people have done with this design, so please post your makes, would highly appreciate it!
Baseball Lacrosse Game Ball Display Holder
This is based on this Reddit post: https://tinyurl.com/2p9c6m6n It's necessarily incomplete, but it demonstrates the idea. Feel free to add a loop to string it up, or a bearing base to spin it around. This will probably not be developed…
Brossel 551 Semi scale model of a NMBS diesel motorcar, put in service in 1939 and decommisioned in the mid 60's. This motorcar (autorail) was manufactured by the Brossel compagny in Belgium, equipped with a diesel engine in the middle of…
Carrosse de Cendrillon, inspiré du modèle proposé A Disneyland Paris.
Stencil - Crosses! Use this 6"x6" (152mm x 152mm) stencil for your inking, dying, painting needs. Happy making!
A wall mount Lacrosse stick holder Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: PETG or Nylon
Since the WECK is a traditional German company that sells its products mainly in German-speaking countries, I hope you don't mind that the following instructions are written in German. Da die üblicherweise für die Sprossenzucht…
Pocket Christian crosses for Church Congregations to provide a daily reminder of Jesus Christ's teachings.
09Apr23: Initial release Nutcracker Drosselmeyer designed to be printed in parts to allow separate colors without requiring an MMU. About 12.75" tall without base. Notes: Recommend assembling from the base up Base without date included…
Pink Floyd's The Wall - Crossed Hammers Medallion. This is my first project ever done completely in Fusion360 (training myself). This model is about 9" across and 1/4" thick. I plan on printing it on my CR10 in Red, White and Black, using…
simple wall mounted lacrosse stick holder
Remix of Crossed Helix Flowing Sculpture to add a stand.
Printed with 0.20mm layers, 4 perimeters, no supports required
The Crossed Lines golf ball stencil insert provides a fun marker friendly logo that stands out on any golf ball that works with the PrintSphere Golf Ball Stencil Holder ( hinged or unhinged ) or the Golf Ball Spray Paint Stencil Jig .…
SUPPORTS NOT REQUIRED. I RECOMMEND A MINIMUM LAYER HEIGHT OF 0.12 MM -BEST RESULTS AT 0.8/0.7 MM
Cookie cutter in the shape of a lacrosse stick
Didatic model to show a pair of helicoidal gears coupling reverse axles. Uses 05 wood screws (flat head 3x12 mm). Best print with PETG.
I wanted this as a wall decoration, so I made it! The best way to print the shield is at a 45° angle with the top of the shield facing down. I have added pre-painted files for the Bambu Lab printers with AMS, as well as files that are…
Stampato in PLA con layer da 0,25 e ugello 0,4. non sono necessari supporti
Simple and quick end-cap replacemet for a lacrosse stick. Left print, even with the horizontal layer lines, is plenty strong for most users. I decided to print a 90º rotation (right) to put as much strength in as possible - and it works…
Hi :) This is one of my vase mode plant pots. As part of my LINES collection this is a very elegant way to present your plants. Find a fitting saucer, I use yoghurt cups that i cut up. For the sizing, this worked for me: if you have a 15…
For details, see the orginal model. This is a variation with 2 headlights and adapted to the EVE chasis described in https://forum.modelspoormagazine.be/index.php/topic,35792.0.html To make printing easier, I shared my files with…
I made this shaft lock insert that can be inserted into a lacrosse shaft with worn out screw holes to help secure the head to the shaft. I printed mine out of PLA and it worked great. Can be removed with a corkscrew if needed.
This is a cross on a mound for the "Cursed Island" scenario (Scenario 2) of the Robinson Crusoe board game. Five crosses are needed for the game. Edit: Uploaded a new version of the .STL file to correct for manifold errors. (2/25/24)…
This 3D model is an airless lacrosse ball engineered for safe, high-rep goalie training. Its internal lattice structure absorbs impact, reducing sting while still keeping realistic shot speed and rebound behavior. The lightweight,…
Bottom End for Stringking Lacrosse Shaft. Perfect with Stringking A175 shaft, but should works with other StringKing shafts too. Adjust Z axis as you prefer, but this should be good as it is
This is a wall mounted solar radiation shield for a wireless thermometer. It will be compatible with devices that fit inside a tube of 50 mm in diameter. Print as many rings needed to fit the height of your device. Print without support…
Sprossen müssen regelmäßig gespült werden, daher habe ich für ein Markensprossenglass einen Halter konstruiert, damit das überschüssige Wasser nach dem Spülen ablaufen kann. Die Beschriftung ist optional. Ein Beschriftungsschild ist…
This model can be used for keychains, bag charms, banquet/birthday décor. and so much more. Infill: 0-100% This model can be edited in Tinker CAD to add names of players, coaches names and player numbers.
It took me a long time to perfect this model and a few tries to print it correctly. 3MF file included w/custom supports. Be careful with supports it's east to break the neck. I recommend slim supports to make them easier to get out. Tree…
Should fit any 5mm post pretty okay. I printed it net back down with tree supports and it came out pretty good. I have a theory it would print great upside down with the handle pointing straight up but haven't tried it.
Public Beta release of the Crossed-Cantilever 3D Printer by Casual CNC. GitHub available: https://github.com/vilmantasbaranauskas/n3d-crossed-cantilever-3d-printer You will need a printer with a build plate of at least 220 x 220 mm.…
War is no glory. No adventure. No heroism. War is steel, blood, and madness. It is the rasping breath of lungs rotting from gas and frost. The trembling hands gripping bayonets because there is nothing else to hold onto. The roar of…
A stand for displaying your favorite lacrosse heads. This is version 1. I will likely make one with a wider base.
Demountable notebook stand without tilt adjustment and with arrow mount indication.
Generalized Ball Holder I used this model for wool dryer balls in our laundry room and lacrosse balls in our exercise room. This is an OpenSCAD model that is parameter driven. Options for the model include a feeder tray to grab the ball…
I've remixed the great "Slew bearing with crossed cylinder rollers" by Isi3d to be able to specify different parameters for the inner and outer rings. Separated variables for inner and outer rings, allowing you to customize the number,…
The perfect way to store your lacrosse stick with a flush screw design and easy cliping mechanism.
Première réalisation de A à Z en autodidacte sous Sketchup Support brosse à dents et 2 petits supports brossettes pour la nouvelle brosse “myvariations”
Update: 11/30/2023 - Added a coaster holder. Moved chamfer on coaster rim from the outside to the inside. This will allow the coasters to be more compact & stable when stacked. Joining the family is my fourth holiday coaster, sporting…
Simple wall mount for the LaCrosse Technology BC-900, BC-1000, and BC-700 battery chargers. However, I cannot confirm as I do not have this or related models. Based on a couple of requests. I just added a countersunk screw version…
Petite boite pour mettre sa brosse à dents pour mettre dans son sac de voyage.
Atlanta Braves Crossed Tomahawks Oversized Necklace Logo that I designed. I hope that you enjoy!
FR Brosse coulissante adaptable sur la dust shoe prévue pour un moteur de 65 mm https://www.printables.com/fr/model/481887-cnc-dust-shoe-65-mm-proverxl-4030 L'amplitude permise est faible, mais en utilisant des poils souples, vous pourrez…
Cookie cutter in shape of a lacrosse player
Hammer and Pickaxe – The Symbol of Mining as a Cookie Cutter This cookie cutter design features the traditional symbol of mining: the hammer and pickaxe (Schlägel und Eisen). These crossed tools have symbolized the hard work and…
Support pour brosse à dent Oral B ou My Variation, j'ai utilisé du double face pour le fixer
A few different crosses, was using them to visualize custom metal cross necklaces, but you may use them for whatever…
Support "3 emplacements" pour brosse à dent électrique Oral B. Impression sans support
Zwischenstücke für die Auflage der Karosserie. Spacers for supporting the bodywork. Tamiya TT
In addition to my changes in this remix, I only have 3 notes: View the original . Roserro even made a neat little video. Mine works the same, it's just a little bigger and takes more parts (lol, the irony is not lost on me). Roserro's…
Hi, A part of my Lines collection, this plant pot is a clean and minimalist way to present your succulents and small plants. Best printed out of petg or other watertight material. This is an outer pot without drainage holes, meant to be…
Un support pour brosse à dent Oral B
I made this mount because the closest i could find was this: https://www.thingiverse.com/thing:5841443 However i still needed a 3rd SMA mount for my Bardpole antenna. The GPS this fits is a Matek M10Q-5883. Its designed so you can…
Sleeve for 3 lacrosse balls. Prints without support. Model in picture made with 0.30mm layer height.
Support de brosse à dents électrique "MyVariation" à fixer au mur avec du scotch double face
A 2d scenery of Getshemane, but I gave it some layers to create a bit of depth. I have also added an optional stone with the text: “He is risen”. Print instructions: Print it on the back with the crosses touching the build plate. Print…
Simple decor for Easter - no special instructions.
A decoration made of crossed candy canes and holly, designed for multi-color printers(MMU3/AMS) Print Instructions Print with supports When coloring the object you can select the color for each part Print with the Holly facing up
Karosseriehalterung hinten Tamiya F103 / Rear body mount Tamiya F103 gedruckt mit PETG / printed with PETG
This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…
Made to be attached to the bottom of your lacrosse stick with the help of a small bolt and nut.
Transform your workspace into an artistic haven with this stunning 3D printable STL model that captures elegance in digital form. This sophisticated female figurine showcases a graceful seated pose with crossed legs, perfect as desk…
Reparatur für die Trossenführung des Hafenschleppers Parat. Gedruckt mit Schichthöhe 0,2 mm. Prusament PLA Jet Black.
Game Ball Alabama Shootout Lacrosse Baseball Game Ball Display Holder I didn't even know Champro made lacrosse balls. Found it at the MU Alabama tournament. Usually Monkey Up Lax (MU Tournaments) labels their balls. I assume to make…
Drosselklappe, um bei einer zentralen Staubabsaugung Abzweige abzuriegeln oder zu regeln. Das Teil wird in einem Stück gedruckt, Gummidichtringe passen aus den 40er HT Rohranschlüssen. Ein angeklebter Gummiring (z.b. Kabeldurchführung mit…
The end to a lacrosse stick made from TPU.
Body posts for Tamiya DT-03 Neo Fighter / Racing Fighter I added the original length and a shortened version that fits perfectly for the Neo/Racing Fighter. --- Karrosseriehalter für Tamiya DT-03 Neo Fighter / Racing Fighter Ich habe die…
This 3D model represents a regulation-size lacrosse ball designed specifically for training and goalie development. The geometry mirrors official dimensions to ensure realistic handling, rebound behavior, and shot feedback. Its uniform…
Das ist eine stapelbare, grosse Schachtel für Batterien. Man kann von links nach rechts arbeiten um die Batterien zu laden. Man kann die Schachtel auch für Akkus nehmen, wir laden hier auch Batterien, mit dem Batteriedoktor von Rezap…
Just a quick parametric model of Naughts and crosses for printing
Transform your space with this captivating 3D printable female figurine that exudes confidence and elegance in every curve. This stunning STL model features a slim lady in a classic pose with crossed arms, showcasing graceful proportions…
