Counting matching models…
Reconfigure your Nerf Pro Torrent! [Scroll to the bottom for updated parts and changelogs] I am a big fan of the Nerf Pro Torrent; but know that it may not be to everyone’s liking. I am incredibly excited to introduce my latest project -…
This is not a firearm. This model is merely a replacement stock / dress-up kit. It does not and cannot fire bullets without a legally-acquired barreled action / receiver. This is a remix of a stock originally designed by Kevin…
This is the fan art of B01-Tactical armor from Helldivers2. The item is a .stl file for a chibi character, designed for 3d printing. Feel free to edit and use it as you wish. Also check out the mechs you can sit the little guy in! EXO-45…
I tried printing the original bearings and couldn't get them to spin freely. So I found these bearings and adjusted them to the same size. I might try testing with the smaller bearings too, since these work so well and the design seems to…
Minor adjustments to my previous design, the Deutsche Bundesbahn Gls205/Gms54 Guterwagen (https://www.printables.com/model/181948-deutsche-bundesbahn-gls205-gms54-guterwagen-gauge-) have resulted in this very similar Gmhs53. 11NOV2018:…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Printed in ABS+ small amount of tree supports needed 51mm Diameter end with anti slip ring. Donate now and make a difference in someone’s life!
…Please be sure to hit like & post a make, I'd love to see your prints! NO more Wobbly RPi PSU's on a single clip for you! The stock clip is good but allows the PSU to wobble about way too much! Fix this issue with this super simple but…
mount for most typical engines like A2212 https://s.click.aliexpress.com/e/_Eu7fG6f or RS2205 https://s.click.aliexpress.com/e/_EvxsxhZ I‘ve made this because RS2205 is sold without mount, screws only PETG 100% infill weight is ~2-3g
I don't have any instructions on how to best print the model
The lid snaps in, just screws for mounting the electronics required
Summary Edit: I uploaded the repaired version, which is exported from Prusaslicer after running the auto-repair function. Please download that to avoid possibly broken model. Sorry if this caused you any trouble! Tips: See the comment…
The turret can spin! Check the reference image to remove the support pins. The regular-sized one matches the size of my other Helldivers model. Feel free to adjust as you like! The turret is designed to be facing backward for easier…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
This is the fan art of EXO-49 Emancipator Exosuit from Helldivers2. The item is a .stl file for a chibi character designed for 3d printing. Feel free to edit and use it as you wish. This model can be used as a vehicle for my earlier…
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
Clamshell stock for the Mossberg 702 or 715T and Rossi RS22. Currently printing on the weekends will upload photos when done and mod mesh if needed. Elegoo Neptune 4 Base PLA+ 35% infill Supports Normal - Touching build plate
Printed in ABS / ASA without support.
Update 20240725: Added a resized version that matches the size of the mechs and the helldiver model. This is the fan art of Charger from Helldivers2. This item has a wiggly butt you can fidget with. The item is a .stl file for a chibi…
TAKES SOME .25 IN DOWELS AND IS SPLIT IN PARTS WITH A REMOVABLE MAG. Category: Props
NCC - ODOMETER GEAR - AUDI 80 B4/B3 QUATTRO CABRIO S2 RS2 100 80 90 - Common fault, mileage stops reading - 99% of the time its this gear has fallen apart. print in whatever lol, TBH I did a PROTOTYPE in PETG and its still solid 9months…
TTL to RS232 adapter base small base for a cheap ebay adapter Additional parts: 2x 8mm M3 screws Category: Electronics
I've been soldering those darn DSUB connectors for nearly 40 years and finally made a mount to hold them for soldering. Uses 10mmX2mm neo magnets. These magnets hold connectors in place even when wires are connected. Mounts for DB9 M/F…
DEKO DKRS20Q2 sawzall BT20XL01 (Makita BL18x0B compatible) battery adapter Your printer must be calibrated. You will need support. This adapter is compatible with Makita batteries BL1850B, BL1840B, BL1830B and their analogues: DEKO…
Case for serial port RS232. Shape sould fit on commont plastic case for this type of serial port, like this:
If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul RS232 connector short version
My design for Helldivers2 dog tags. Download, enjoy and post a make! At 100% dimensions are about: 55.6mm tall X 28.8mm wide x 4.8mm thick. I did mine using satin black and silk gold, paused the print to change colors when the border…
Save resin thanks to this support allowing you to recover the remaining resin from your tank before cleaning. A location is provided to place a grid to prevent any objects from polluting the resin. Happy printing to you. Faites des…
Did you buy the MacroPad barebones, like I did, and realized that you had no plate to anchor the switches to? Yeah, that happened. So, OpenSCAD to the rescue. I found the dimensions of the plate on Adafruit's site and with some BOSL magic…
Avant TDI Logo im Retro RS2 Look. Ersetzt das Quattro Logo mit der Teilenummer 4F9 853 736.
This 3D-printable case is designed for a RS232 CH340G USB-to-TTL programmer . It protects the electronics, keeps the wires organized, and makes the device easier to handle during programming or debugging. Perfect for DIY electronics…
This tray is intended to catch water drops and ice chunks after dispensing on the Samsung fridge RS22T5200S9 (and similar models).
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Recently cracked my light, needed to replace and decided to make some covers aswell. Decided to skim one edge of the cover for guaranteed fitting. Mainly as Aftermaket indicators etc can vary in moulding, but OEM has no clearance (both my…
In the times before USB, serial ports were used for lots of computer interconnections. In those days, they were mainly large 25 pin connectors, and adapters for the carious pin cinfigurations were required regularly. For the later 9 pin…
https://learn.adafruit.com/esp32-s3-ble-rs232-controller
This is a case for the isolated USB to RS232 converter. It does not require any screws and just press fits in to place. There are two types of top cover, one plain and one with text. Print instructions Printer Brand: Prusa Printer: i3…
Added a badge for HD2 for this controller stand. Model is 39.96 as recommended in the original model. I had to shrink it just a bit to get it to fit. Insert color change above 10.00mm if you want the skull to be a different color.
utilizing the Renault Scenic 25mm ARB and the Bush, you can upgrade from 21mm solid ARB to a hollow 25mm. recommend upgraded drop links. Future Plans to add 21, 22 and 23 ARB Bush. this is a substitute for a poly bush. Printed in Bambu…
2way tape this baby to the side of your elegoo mars2 pro.
Toyota Altezza RS200 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Gatling sentry for my fellow helldivers
Turbine for simple BLDC RS2205 motor. Sells on Ali for 5-6 eur Need controller for 200-300W to operate
Helldivers2 dog tags - Helldive edition. One for the bot lovers and the bug lovers. Download, enjoy and post a make! At 100% dimensions are about: 55.6mm tall X 28.8mm wide x 5mm thick I did mine using black and matte white, paused the…
I love the Stratagem Icons and wanted a display so I made one. Print out 2 and you can display your entire loadout! 1 cm holder space fits Cysterion 's Statagems without modifications.
Case for original f.u.n.k.e. ATR833 Sub-D connector (SSATR2) to add BLE serial for Skydemon. It is designed in a way to sit under the original connector at the back of the radio and not physically block anything else (as it's virtually…
The lid snaps in, just screws for mounting the electronics required.
Keep in mind that I used a really transparent ugly yellow filament so the model will probably look a little different if you have a proper yellow filament:) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm…
A simple horizontal stand for the amazing Solder Fingers 2.0 - soldering aid / helping hand by idig3D | Download free STL model | Printables.com Material: PETG/PLA Layer high: 0.30mm Infill: 15% Supports: No
I needed a dust cover for outdoor appliances with a D-SUB 9 female plug. Could not find any, commercial ones are hard to come by but seem to be flexible silicone rubber base so used TPU flex. Also added a little recess to have something…
This is an adaptation of Bruce Leedle's hardware free bcar redesigned to be installed on the GP3D standard-base parts muzzle. Support free printing, oriented properly and ready to go. clone the pin and roller x12. if you feel like the…
To mount this, you'll need M4 threaded inserts pressed into the 2 holes which hold the datalogger into place. The hole diameter for the wall mount screws is ∅6mm.
If, like me, you struggle to find the right motor, you can buy a cheap R260 (sometimes also called an RS260) motor from AliExpress, which is the exact size you need. I couldn’t find a variant with a D-shaped shaft, so I bought one with a…
Just a small case for PL2303 based usb dongles with either straight or bent header pins. Small hole allows LED visibility. glues together. Category: Electronics
I disliked the original trigger, so I made a new one myself that I believe is better, or at least, it "feels" better, you will need to print it in its original parameters, in this case it would be 5 walls 100% infill.
Ford RS200 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
The Meross MRS200 is a Wifi (Thread) motorized winder for belted roller shutters. Very nice device but quite bulky. In my case I had no way to install it in place of the original winder in the window frame, so I designed this box which…
Some Sliding feet for the EMAX RS2205 2300KV motors. In the F3D file, you will find 3 parameters. Parameters rib_size This defines the size of each of the 4 ribs (as rib_size * 2 ) foot_diameter This defines the total diameter of the…
This is a slim enclosure for “Hailege Mini RS232 to TTL MAX3232 to TTL Level Converter Board”. Idea is on TTL side all 4 cables are connected, other side a 2 pin 2.54mm header soldered in place. print instructions print base as you like…
If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul RS232 solder holder, for easy soldering of the wiring. no supports
4-pin rs232 serial interface connector for Garmin GPS Category: DIY
Overview This is a modified version of David Kingsman's split-flap display. I made these changes: Unit: Changed the parts to accept 3mm self-tapping flat-head screws (no threaded inserts needed). Removed the small protrusions at the…
Zdroj pro Raspberry Pi - zavlažování zahrady OSPy http://opensprinkler.cz/ https://pihrt.com/elektronika/248-moje-rapsberry-pi-zavlazovani-zahrady Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…
Modeled to fit my Ryobi RS290G sander
18.2.2020 landed rover Perseverance on Mars, amazing.. :) PLA, PETG, ASA…. *.3mf need modifier PrusaSlicer for any more structure….
I designed this front bumper antenna mount for the TBS Sourceone v3 7" quad. It has a horizontal mount that fits a standard Happymodel ELRS 2.4 dipole antenna. Due to the design of the HM antenna, making a solid and reliable mount that…
Update: V2 has lower schoulder with a larger base to fix a problem with the friction of the part. Prefer to print it in PETG or ABS. Attach the chain guard to the chainring with 5 M4 bolts if your chainring is not threaded. In the other…
This arranges 4 RS232 screw terminal breakout boards so you can wire up a sniffer for reverse engineering purpose. You may need to adapt the screw holes and the solder pits to match your breakout
All six unique pieces have been separated in case you want to print the arm horizontally for optimal layer line orientation. Separated using MeshMixer's "separate shells" feature and exported as 3mf. What's included: 7mm dual base 7mm…
Models: emax_motor_wrench_v1.0r.stl -----> standard wrench for rs2205/rs2306 emax_motor_wrench_motor_guard_v1.0r.stl ----> same as #1 but for people who have motor guards and cannot fit the standard wrench…
Simple case to hold Atnel's AVR microprocessor programmer ATB-USB-RS232. Category: Electronics
Inspired by the nucleus-m 19 to 15mm rod bushing. Made to adapt larger focus motors to DJI RS2 proprietary 12mm rod. Printed with brim.
All details in this video (in Ukrainian)
The overall dimensions of the original are not changed. Printing the shell in PETG will keep the clamps work better over time (PLA tends to deform). Use an extra perimeter to make it more robust. Printed with 0.2mm layer height, 0.4mm…
I've been playing with computers since the 1970's. I've gone thru many generations of computers and sensors. Technology is always changing and it obsoletes your old projects. I have several old sensors that have RS232 interfaces. They…
Non destructive mount for hose for my parkside vacuum cleaner ( vacuum cleaner not running, i use just hose :) ) recomended use bothside tape for sealing need just one M3 screw, wash and nut maybe fit with vacuum cleaner hose other…
I couldn't find a control box for my router table so I made it like this. I created everything in Prusa Slicer so it's in *.3mf format. The models look a bit strange without negative volumes (I don't know how to convert to *.stl yet and…
German: (english below) Diese Halterung ermöglicht die sichere und platzsparende Befestigung eines Digitus RS232 zu USB Adapters direkt unter der Tischplatte. Ideal für den Einsatz im technischen Büro. English: Diese Halterung ermöglicht…
I really like the Torrent RS2, but there was one thing I had to change. I wanted just a few more picatinny teeth. This is a simple remix which adds more teeth to the front and back. It is the same overall size and should fit normally.
Din Rail RS485 converter mount. eg for mounting the modbus tcp controller on a home batterie like marstek. Mounting can be done by using 6mm magnets. V2- easier mounting the module on the DIN rail mount. Parts: RS485/232Converter…
The original Nerf Torrent has a safety switch that prevents the trigger from being pulled. The RS2 however does not have a safety switch. It is a decently strong blaster that can still take an eye out if someone isn't wearing proper eye…
Wrench to hold the motors while removing or installing props. Provides plenty of clearance from the props with the long handle and it has a good grip on the motor. 100% infill recommended for extra strength. The difference between v2 and…
Removed 40mm from the stock to help make it easier to shoulder. Prints in the same orientation as the original.
Upravený effector pro Kossel linear Plus E3D V6. Upravený držák pro použití konektoru DB9 RS232. Verze: ventilátor chlazení tisku 40*10mm Hydraulic Turbo Fan + DB9 RS232 ventilátor chlazení tisku 40x40x10 + DB9 RS232 + Brass Inserts M3…
I printed this in PLA. Colors were red (for Mars) and the rover in white. The small star in upper right represents Earth so I printed this in blue. It is more typical to see it with red and white only though. The pieces just snap…
As I use a TocuhDRO evaluation unit on my lathe and milling machine, I needed a holder to hold the plugs of the linear scale. Three magnets are integrated in the holder so that it can be attached to the metal parts of the machines. The…
A simple and easy to print logo for the HellDivers2 Devoid Of Liberty major update, can easily be printed with 2 colors even without a multicolor printer by pausing the print and changing the filament when the base plate is done.
Moved the mounting points back to fit better.
Print flat without brim, mounts to the threaded holes on the label side You‘ll also need 4x M3x4 screws (M3x5 or M3x6 might work but make sure they don’t reach too deep into the power supply so they don’t short anything out)
This is a solution for playing while seated on a barstool or standing. The array system makes it easier to listen to the bass without needing a higher volume output. The angle of the RS212 (bottom) is set to 13º, and the RS210 (top) is…
Reconfigure your Nerf Pro Torrent! [Scroll to the bottom for updated parts and changelogs] I am a big fan of the Nerf Pro Torrent; but know that it may not be to everyone’s liking. I am incredibly excited to introduce my latest project -…
Update: V2 has lower schoulder with a larger base to fix a problem with the friction of the part. Prefer to print it in PETG or ABS. Attach the chain guard to the chainring with 5 M4 bolts if your chainring is not threaded. In the other…
This tray is intended to catch water drops and ice chunks after dispensing on the Samsung fridge RS22T5200S9 (and similar models).
The Sidecar for Psion is portable PPP modem and linux terminal for RS232 devices powered by a Raspberry Pi Zero. Required: Raspberry Pi Zero Pimoroni Lipo Amigo Pro Pimoroni Lipo Shim for Raspberry Pi Lipo Battery 2200mAh PiRS232 Board…
