Counting matching models…
First, the name. G is for Gaub, or Greg, whichever you prefer. S is for Samson, as in Dennis Samson. His original design for a rotating sanding drum machine for whole axles (e.g. pressed on wheels) inspired this design to a great extent.…
NORSMIC Raspberry Pi Screen, 7 & 10.1 inch Monitor Frame - Required (new) hardware: 2 - M3X16 Flathead - Stainless screws 2 - M3X16 Flathead - Stainless screws 2 - M3 Hex Nuts - Stainless I also printed and shown in photos this model:…
I don't like attaching the microphone-speaker to the antenna of the radio when it's not in use. The antenna is for transmission and not for mounting things. That's why I designed a holder that rests on the two holes on the back of the…
A little spacer and tightener for a hex nut on a RSMA/SMA antenna connector. Allows a hex nut to be hand tightened while providing an end-stop for the antenna. Here I'm using it specifically in my MJX Bugs 3 transmitter, where I've…
eRacing-Lab RSMEGA or SFX100/150 25mm diameter cable holder for aluminum profile with 8mm socket for M8 16mm screw max.
As seen on various other hobby machines, such as comm lathes for brushed motors, and introduced to me by Snuggler on freeslotter.de, this is an optional version of the Axle Bracket side pieces that will hold two 3mm x 6mm x 2.5mm ball…
WONDERSMILE Travel Case A fully 3D printed Travel Hard Case for the Wondersmile electric toothbrush and 2 brush attachments. No Magnets, no bolts, no glue and no screws are needed. Just 3D printed parts and a bit of filament for the…
Started to make a collection of these and more is to come. (fun to make) Pre drill in the cabinet with the pre existing holes in the model. 8 cm high
Throwing knife from the Dark Warsmith set.
Based on MrFlippant Original Idea and design of the MSR Tire Truer Sanding Plate Reciprocation Machine I made it work for the Overdrive tire truer RSM4. I have printed everything in ABS on a Voron Trident I have used the recommended Voron…
A customer wanted one of my reciprocators for his RSM4 Tire Truer. He was kind enough to let me borrow it in order to modify my machine to fit that tire truer! While this was completely redesigned from scratch, I still owe thanks to…
I have an Elegoo MarsMate filter that I use on my Eufymake E1 UV printer. I wanted a refillable and replaceable version of the filter the device uses. This allows you to get activated carbon pellets, filter material and some strapping to…
Halterung für Sepura Lautsprecher Mikrofon sRSM 300-01169 zur Befestigung an einer Wetech Ladeerhaltung mit den vorhanden Schrauben. Lochabstand der Befestigungsschrauben 40mm Variante für links und rechts Gedruckt mit TPU 95A. So…
Dark Warsmith Cutlass from the Dark Warsmith set in Sea of thieves.
Mersman Maple End Table in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I printed it upside down so no supports would be needed, and with no brim at 80% speed using Polymaker PolyTerra Matte PLA Filament Peanut.
TruckersMP logo decoration for the truck cabin like in the game ETS2
Am besten mit PLA oder PETG drucken.
If your clipsal 30RSM3 knob has broken, you can use this print as a replacement knob. Print instructions Print at any layer height between 0.10mm and 0.20mm with a 15% infill
I bought and printed the “Magic Sphere” from Angus at Makersmuse . Because I had to order the ball bearings that Angus used, and I was impatient, I decided to fill the 10 mm hole with a pseudo bearing and see if that would work as well.…
RSM Truer Knob Cover fits straight over the original adjustment knob. The indexing on the knob cover will make it easier to make adjustments. When used with the downstop lock will improve the usability of your RSM Slot car tyre truer. I…
This is an adapter to allow the ELEGOO Marsmate Air Purifier to connect to a 3d print enclosure tent exhaust port. This adapter uses the supplied screws from the Marsmate Air Purifier. I have a MakAcess print enclosure tent. But this…
A downstop for the RSM Slot car tyre truer to stop the machine backing-off during grinding. I printed mine in PETG, it requires no supports if you print it the way it's supplied.
MARSMELLO KEYCHAIN The size can be adjusted in the slicer 25% infill ,quality 0.2 supports no , pla colors can be added in the slicer if needed Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
I've got a wooden tissuebox, but the mainhole wasn't smooth enough. Maybe my handcraft skills are too weak, I made it worse. So I designed a cover with an insert to fix it. My cover doesn't looks pretty, so I used Eva's design to make it…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
Ich wünsche mir eine stabile universelle Befestigungsvorrichtung für mein Outdoor Smartphone. es soll auf dem Lastenrad am Lenker oder an der Lenker-Strebe ohne viel Aufwand mit wieder zuöffnenden Kabelbindern befestigt werden können.…
My partner has an epoxy resin home business, but the fumes from the art are unpleasant and unhealthy. However, the weather here is rarely good enough to do the craft outdoors. As such, I went looking for fume-hoods for our hobby room for…
Storage box for 8 pairs of aligners, spaced 15mm.
I recomend printing 2 holders, one for the intrigues and the other for all the other cards of that size.
Bring a personalized touch to your home decor or create a meaningful gift with this rugged, outdoors inspired cross display piece! Featuring integrated deer antlers, a fishing hook, a bass, and a central nameplate. Key Features: Fully…
Am besten mit PLA oder PETG drucken.
I have an Elegoo MarsMate filter that I use on my Eufymake E1 UV printer. I wanted a refillable and replaceable version of the filter the device uses. This allows you to get activated carbon pellets, filter material and some strapping to…
NORSMIC Raspberry Pi Screen, 7 & 10.1 inch Monitor Frame - Required (new) hardware: 2 - M3X16 Flathead - Stainless screws 2 - M3X16 Flathead - Stainless screws 2 - M3 Hex Nuts - Stainless I also printed and shown in photos this model:…
