Counting matching models…
Did you also make the mistake of buying a Rosewill RSV-4412 server case or RSV-SATA-Cage-34 panel-mount case? If so, did you realize Rosewill doesn't sell spare disk caddies? If not, did you notice how flimsy the sleds are, and how…
Store four Rosewill RSV-series hard disk sleds in Alexandre Chappel's second-favorite grid-based modular desktop storage system! Since Rosewill only sells sleds pre-installed in cages, you either have no loose caddies, multiples of four…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
Wall mounts and connectors for 120mm fans to connect together and make a wall of 360mm fans to help the Rosewill RSV-R4000U case have the adequate airflow it needs. Wall mounts just screw into the side of the case using a couple of the…
I misplaced the rails to mount HDDs into the trays of my server housed in the rosewill RSV-L4500, so I designed these and they fit perfectly. The spacing is standard so there is a good chance they'd fit in other trays. Category: Electronics
Rosewill doesn't sell spare caddies for their RSV-4412 cases and RSV-SATA-Cage-34, but if you've somehow got spares, don't leave them naked and afraid. Enrobe them in this handy protective sleeve. You should probably print this in…
This is a remix for Aprilia RSV motorcycle fans Phone stand: v1-1 is suitable for devices with a total thickness up to 10mm v2-1 is more stabile and suitable for devices with a total thickness up to 16mm all versions with cut-outs for:…
This is a replacement straight track segment that connects with the Wintersville/Dickensville/Western Express train sets made by New Bright in the late 80s and early 90s. It's compatible with the original track system and with itself, so…
Can be mirrored to produce left and right pairs
There are 4 different options of 1-4 ssd mount. Uses M3x8mm screws for the ssds and M4x15mm screws for mounting to bar.
Model of a Piston Aprilia RSV Mille 2002 RP. Tried to print in Silver Silk PLA but still strugglin with orientation
The holder flange to fix the side mirror at a Aprilia RSV Mille Flansch zum befestigen des Seitenspiegels einer Aprilia RSV Mille Category: Gadgets
MOZA CSV2 RSV2 Wheel Logo inspired from the design of Dexter Cobb. I have created a blank plate for anyone who wants a custom logo for their MOZA CSV2 RSV2 Steering Wheel. This also applicable to older versions of CS and RS as long as…
Some 3D printer models for Aprilia Tuono V4 1100 / RSV4 footpeg remover cover. This for 2015+ models. There is two models since the model isn’t fully symetrical. Also you have the Fusion 360 models for learning purpose. Be carefull if…
I am porting my original designs from Thingiverse, below is the original description (https://www.thingiverse.com/thing:4729914) This is a custom design for converting a RoseWill RSV-4500 server case to be a 48 drive capable DAS. This…
Mine was worn down to almost nothing, so I made new one, slightly redesigned for 3D printing. Would recomend prining with 999 walls for better abrasion profile. Part number AP8158669.
10inch rack for 10 inch Rosewill RSV-SATA-Cage-34 + JetKVM Rack (https://a.co/d/37Nv8Fi) with accomodations for 2 jet kvm's. Built for my personal homelab build. print with atleast petg, with front facia on build plate.
I got a Rosewill RSV-R4000U 4u Server chassis basically for free but there was no cable management bar in the case like the photos on their website state so I designed my own. Has slots all down the profile of it for zip ties to do cable…
This is a replacement half-length curved track segment that connects with the Wintersville/Dickensville/Western Express train sets made by New Bright in the late 80s and early 90s. It's fully compatible with the original track system and…
Replacement handle for 4U Rosewill rack-mount cases. One of my handles broke, preventing me from using the door/air filters. Designed this so I could use them again. Print with at least 30% infill. DO NOT USE THIS TO LIFT/CARRY THE…
The RSV-class heavy frigate is the largest and most potent frigate utilized by the Covenant Empire during the Human-Covenant War.
This Aprilia RSV4 Factory scale model is a detailed 3d printable super sports motorcycle stl for collectors searching for “aprilia rsv4” or “rsv4 factory” model files. Made for display stands, desk and tabletop dioramas, garage-themed…
Mirror delete/blindplates Aprilia RSVMille '98/'03, to remove the mirrors (for racing etc.) but don't leave the bodywork with ugly holes in it.
English : remix of https://www.thingiverse.com/thing:6188199, I modified the general design and at the level of the gas door to better be able to fold the lock cover when wearing the gloves. Français : remix de…
English : small cover for those who ride without the passenger footrest support for Tuono and RSV Gen1 Français : petit cache pour ceux qui roule sans les platines repose pied passager pour Tuono et RSV Gen1 Print Settings Printer Brand:…
I missed the part where Zack explains about Rosewill and why its Crappy, but Disk Sleds he designed are very cool (thank you, Zack!) - so I wanted it in my 10 inch rack... I plan to connect only one drive using a controller board from one…
For Rosewill RSV-L4412U 4U server chassis, will support up to 360mm AIO's and fans in push pull. Pressure fit, however if you wish it has enough thickness and height to be screwed in with heat sets on both sides with the stock holes in…
ENGLISH Battery fixing plate for Aprilia RSV 1000 1999/2003 and Tuono 1000 2002/2005 for battery YUASA YTX14-BS (which is higher than the YTX12) FRANCAIS Fixation de batterie pour Aprilia RSV 1000 1999/2003 et Tuono 1000 2002/2005 pour…
This Aprilia RSV4 scale model STL is a detailed 3d printable sport motorcycle model for collectors, dioramas, and display pieces. Print it for a desk or shelf showpiece, a model-building project, or a themed garage and racing diorama. The…
English : shock spring adjustment key for Tuono or RSV, the diameter is 76.5 mm and the hook is 5.9mm wide. Français : clé de réglage de ressort d'amortisseur pour Tuono ou RSV, le diamètre est de 76.5 mm et le crochet fait 5.9mm de…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/3B8cY2qTS38 Category: 3D Printing
English : Aprilia RSV 1000 rear-view mirror wedge to raise them (2, 4, 6, or 8 cm) for better visibility, RSV and Tuono compatible. To protect the fairing, I glued a 1mm thick self-adhesive black foam at the base of the extensions.…
I printed in polycarbonate blend. Fits perfectly and just a small drop of glue. I have added shorter versions that fit better with my tools at least ;)
Holds a Pentel RSVP refill, providing a larger area to grip and without the rubber which can become sticky over time. This version does not include a cap. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
ENGLISH Rear headlight cover for Aprilia RSV 1000 and Tuono, ultra slim version (9.8 mm high), printed in translucent PETG. FRANÇAIS couvercle de phare arrière pour Aprilia RSV 1000 et Tuono, version ultra slim (9.8 mm de haut), imprimé…
3x 120mm Fan mounts for Rosewill RSV-L4500U Accomplishes the same task as the 140mm fan version, but for if you're missing the middle plate for 120mm fans... Second hand cases are great... I've built in a bit of wiggle room just in case…
English : creation of spacers to keep the original fixing of the handlebar end to put mirrors bar end, so they will not move when driving Français : création d'entretoise permettant de garder la fixation d'origine des embouts de guidon…
A small organizer for devices and documents. I made this to hold my various calculators, but it can be used to hold / organize many items such as phones or documents. It can also be situated on any of its sides. The dimensions are 184mm x…
I opened old hp inkjet printer/scanner combo and found this neat WiFi module inside. Then found out it can be used as USB WiFi-Adapter. The original design required you to make a tiny adapter PCB with USB-A male plug. Since I haven't got…
It is a prototype for the flyhammer crashpad. Replacement. I wouldn't use it as an actual crashpad as a 3d print.
I've had 2 crashes now on track. Both times the vulnerable connectors were destroyed which can be a pricey replacement. I printed these parts lying down with PA12-CF with 4 perimeters and 50% infill 0,1 layer height, support needed i…
Features a simple installation and plug & play design — only the original stock screw is required. For improved durability and long service life, the part is recommended to be printed from a rigid material.
This is a replacement straight track segment that connects with the Wintersville/Dickensville/Western Express train sets made by New Bright in the late 80s and early 90s. It's compatible with the original track system and with itself, so…
Features a simple installation and plug & play design — only the original stock screw is required. For improved durability and long service life, the part is recommended to be printed from a rigid material.
Overview The non-extended should take up roughly the same footprint as the regular cages, and the Extended will allow for HDD's that are missing the middle mounting hole to be mounted (Like some of the weird 8TB Seagate HDDs). This…
This is a plug for Centrsvet Infinity plug system. It's a simple parametric design, you can adjust the length to what your printer can handle. You can print using virtually any material since this part doesn't experience heat, but if your…
