13 models
I replaced the Concorde lead acid battery in my Van's Aircraft RV4 with an EarthX lithium battery. As the lithium battery is smaller, I needed this spacer in the battery box. I printed with PETG at 15% fill. I didn't need supports for the…
Print approx. €13.29–€16.24 excl. taxPreliminary estimate for PETGSource material: PET
The pictured print was printed at 0.2mm layer height using a mixture of SAFilament White and Prusament Galaxy Black PETG. Supports are necessary for counter 1. I used the honeycomb supports pattern set to print support enforcers only.…
3D printed part to attach the Rat Rig V-Core 4 IDEX Oozeguards to the MandalaRoseWorks Machined XY Joiners. Uses M3 Slim Nut OR M3 Heat Set Insert to hold the Oozeguards in place. NOTE: The Slim Nut version requires high printer tolerances!
Description A bottle cutter that uses 608ZZ skateboard bearings (8x22x7mm), and US pennies or 5/16 washers to adjust the cut width. Parts 2, 608 bearings (8x22x7mm) (Grind at least one side flat to use as a shearing surface. I used an…
I printed out the original BeerCounterV4 which is an awsome design. I wanted to stick it to the fridge door so I did some experiments with wood, but I guess the best and cleanest design would be to print out a base with slots for 5mm…
Requires/extends BeerCounterV4 Printable without supports and printed perfectly fine on my Bambu X1C in PETG. I recommend 3-4 perimeter lines and ~25% grid infill as usual when you are printing things that have to be stable. If you have…
Remix of the cover from this remix: https://www.printables.com/de/model/264191-dial-mod-for-beercounterv4
RC Bazaar Sky Surfer V4 Crash Plate
MLock Handguard Based on one of my previous designs.
Rcexplorer TricopterV4 FPV Cam mount for standard RunCam Sky+ like cameras. Print this object twice to use it. Category: R/C Vehicles
A table mounted touch probe that accommodates bits up to .25" and V-bits up to 3/8". Not recommended for .5"+ surfacing bits. Requires a .4mm conductive surface and construction of a wire cage. I used the V1 Engineering .4mm touch plate…
Holds one hair dryer plus its power brick. Holder slides into wall mounted dovetail for secure hidden attachment. No supports needed. Probably a good idea to use extra walls or print in heat resistant materials, this one is in PLA+ with…
I replaced the Concorde lead acid battery in my Van's Aircraft RV4 with an EarthX lithium battery. As the lithium battery is smaller, I needed this spacer in the battery box. I printed with PETG at 15% fill. I didn't need supports for the…
Print approx. €13.29–€16.24 excl. taxPreliminary estimate for PETGSource material: PET
