Counting matching models…
During conversion of my iMac 27" 5K into a stand-alone monitor I stumbled across the parts designed by @ pnwkayaker . Liked the holder for the SA1 board (same as I used in my build) but wanted to use less plastic there. So I trimmed down…
2026-04-19: Bill of Materials (BOM) Life has pulled me into multiple directions and I finally got time to update this post with a bill of materials (see below). This is the full electronics list and video adapters used. There're 2…
Hello, i could only find clip's for mic arms with 10x10mm bar's but the Rode has 12x12 so they dont fit. That's why i made one myself. It “works” great, mostly, holds the cable well without crushing it (not like you could crush an XLR…
This allows you to attach 5.6-5.8mm O/D XLR cable to a Rode PSA1 microphone stand. This is a remix of this cable clip on Thingiverse . Credit to silence1377 for the original design, I just enlarged the cable portion to fit my XLR cable.…
Just a simple Headphone Holder for the RODE PSA1
I needed a model to hang my Elitedesk on the wall but didn't want to attach it permanently since i'm going to mount it in a tight closet. This way i can just slide it out if i ever need to plug something in. The standoffs need to be cut…
This 2.5" HDD enclosure is designed for the new generation of 15mm Seagate 4 and 5TB hard drives. These hard drives are cheap, whisper-quiet, very economical in power consumption and can therefore be supplied with power directly via…
A small tab that clips onto the psa1 microphone holder to put your headphones on.
Gridfinity insert for the Parkside PBSA 12 screwdriver with battery. Additional fur insert.
TrackIR arm that mounts under the VESA100 screws. The sensor mounts magnetically to the arm like the original stand. There are short and long arm pieces to customize the arm length. Additional hardware requirements: -M5x30 bolts and nuts…
Hi Freunde der Audiotechnik, es gibt im Internet schon einige dieser Cable Clips für den PSA-1 von Rode. Allerdings haben die mir alle nicht gut genug funktioniert. Ich habe deshalb selbst einen erstellt. Viel Spaß mit den Clips. Drucker:…
It was annoying for me to have some loose cables at the arms of the Røde PSA1. So I designed this, to enclose and Mount the microphone cable at both armparts. It has a nice and tight fit and holds onto the arms without any tape or so. I…
This is a minimal wallmount for monitors with a vesa100-compatible mounting plate. It works like a frech cleat but with no chance for the monitor to slide sideways of the mount. I have a 24" benq monitor attached to the mount an it is…
Got a small desk where your monitor takes up half the space? Mount it to the wall! This is a removable Monitor mount for your wall. There's no adjustment (yet) so you'll have to measure it right! I wanted the design to be removable so I…
A VESA100 mount for this awesome model - https://www.printables.com/model/309029-modular-75mm-vesa-monitor-arm/remixes#preview.yxqLb
VESA 100 mount for a Netgear R7000 router. Enables mounting router on back of LCD Monitor. Saves desk space. I swapped out the router middle antennae with an remote/extension wired antennae, so the middle antennae wasn't in the way of the…
Wall Mount for the RØDE PSA1 Studio Boom . Uses the supplied desk-insert style attachment. The optional headphones extension allows for hanging your headphones below the boom mount. If mounted on a concrete wall a four M6 metal dowels and…
Just a simple MultiCableClip for the RODE PSA1 Mount to hold XLR and Headphone Cables.
Simple yet effective, this clip-on headphones holder is designed for the Rode PSA1 microphone arm. It also includes a simple cable clip. Easy to print without any supports, it provides a convenient and neat solution to store your…
This is a nozzle for the BOSCH battery vacuum cleaner GSA18V.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/47pBZPJU7sW Sägeblattführung mittels Kugellager für Bandsäge Scheppach Basa1.Für Quermutter 10mm Aussendurchmesser und M6 Schraube und Kugellager 15x6x5.…
This is a remix of a StoneTaskin JRY-W9RQUHD-SA1 Driver Board holder for an iMac 27 retina 2017. The original part: https://www.thingiverse.com/thing:7044482 I modified the upper bracket to fit for iMac 2017 housings which have slightly…
Simple hose adapter for my bandsaw Scheppach BASA1. Thanks, Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Doesn't Matter How I Designed This I designed this with Tinkercad and it was the first time that worked…
This is a ground up rebuild of a battery holder for the new generation of Sony cameras. It is completely parametric, having been put together in Rhino 3D and Grasshopper.
Have a 3 monitor desk stand, but with HMD, I don't need all 3. So now one of my VESA Brackets can be a convenient place to store the HMD when not on my head. M4 nut sockets, ideal with 12mm M4 screws. Print instructions Category: Tool…
This is a cable clip for the Rode PSA1 Microphone boom (https://www.amazon.com/gp/product/B001D7UYBO/). I wanted something a little cleaner than the velcro straps that came with the boom, so I whipped this up quickly in Fusion 360.…
I was looking for a way to attach a budget-friendly, generic microphone boom to my desk. Taking inspiration from the Rode PSA-1 , I designed this model. It includes a two-part hub that is secured in a 25 mm hole (which can be drilled…
Clips that can be slotted into the frame of the Rode PSA1. XLR cable has to have a diameter of 6mm to fit into the clips. The fit of the cable can be pretty tight, shouldn't damage anything and keeps it into place. Printed in ASA
- detail description an photos would be added later
Its an adapter to Mount an Vesa 100X200 (some TV's) display on an Vesa 100X100 monitor arm. The adapter has been holding up the 32" tv I'm using as a second display for over a year without a problem. I printed it out of petg with lots of…
just a simple slide vesa14 screen…. PETG is recommended with 0.2 Layer.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/hcswZB5tz3Q Sägeblattführung mittels Kugellager für Bandsäge Scheppach Basa1.Für Quermutter 10mm Aussendurchmesser und M6 Schraube und Kugellager 15x6x5.…
The images show it mounted into a piece of carboard…. but it will get mounted into a piece of wood as soon as I get further along on this record cabinet restore… This can be printed with no supports as is (face down). If instead you want…
szybki prosty w wydruku pojemnik na zakrętarkę parkside pasuje do Organizer QBRICK System ONE M Plus 2.0
This model was necessary to clear up my desk space, to get stuff off the table. Parts For assembly you will need: printed parts For parts print the following: 1 x xiaomi_MIjia_support.stl Assembly There is no assembly needed for the…
This simple knob is designed to easy rotating the microphone on a Røde PSA1 microphone arm without touching the microphone itself. Additionally, it provides better grip in order to fix the microphone securely to the arm.
Wandhalterung für meinen Bosch 12 V GSA Fuchsschwanz
Print it twice, so you can tighten it up perfectly. It is so tight, it won't move. 100% infill 0.2 layer
Vesa100 support made for an HP T630 Printed in PETG with 3 wall, 4 top and bottom layers, 20% triangles infill. Tree supports were used.
Need: 8 x M3 screws, 10 mm long 8 x M3 nuts, 2.5 mm thick
Hi all, I made this because the normal rode clamp mount couldn't fit onto my workshop table and the through-table mount wasn't possible. NOTE: This is a fixed mount so it requires drilling. I used PLA (Glow in the dark Filament too ;) )…
A heavy duty wall mount for the PSA1 that I used well in the past
Features Eco-Friendly: Eliminates the need for short-lived disposable 9V batteries. Integrated Charging: Built-in slot for a Micro-USB charging board. Stable Power: Designed to house a DC-DC step-up converter to boost voltage to 9V.…
Modified version of ed_33519's Intel NUC Adapter. Added cutouts for 4mm nut and extended to 4mm. This allows you to attach vesa100 compatible items to the back of the Ergotron HX Dual Monitor Arm Bow Printed in PLA, 20% infill, with…
szybki prosty w wydruku pojemnik na zakrętarkę parkside pasuje do Organizer QBRICK System ONE M Plus 2.0
Vesa100 support made for an HP T630 Printed in PETG with 3 wall, 4 top and bottom layers, 20% triangles infill. Tree supports were used.
Modified version of ed_33519's Intel NUC Adapter. Added cutouts for 4mm nut and extended to 4mm. This allows you to attach vesa100 compatible items to the back of the Ergotron HX Dual Monitor Arm Bow Printed in PLA, 20% infill, with…
