Counting matching models…
My mother has always warn a crusaders cross and I thought it would be fun to experiment modeling one and send it as a gift. So here it is, if you have friends family or yourself want to display this then have fun
Print approx. €23.53–€28.76 excl. taxPreliminary estimate for one variant
För väderbeständighet, välj PETG. För detaljer på text, välj lagerhöjd om 0.07 mm eller mindre, samt välj ett munstycke som är 0.4 mm eller mindre. Om hylsan inte enkelt går att tränga på, ändra `inner_clearance` i .scad-filen till den…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
Leg for CZC Gaming Crusader keyboard. Fits perfectly. Printed with Creality PLA, 0.1mm, 15% infill, with supports.
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Crusader-Era Ceramic Hand Grenade (11th–12th Century Jerusalem) During archaeological excavations in Jerusalem's Armenian Garden, researchers recovered sherds of medieval spheroconical ceramic vessels dating from the 11th to 12th…
Print approx. €4.33–€5.30 excl. taxPreliminary estimate for one variant
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Batman. The Caped Crusader. The Dark Knight. Whatever name you choose to call him by he is sure to make the dust bunnies on your shelf…
Ready to smack nonbelievers. This has a thin pointy sword - make sure your cooling is good or print 2 at a time. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer…
Gate and Arch - No Supports: https://www.printables.com/model/436334-medieval-palisade-gate-arch-print-in-place-no-supp Matching Wall Set: https://www.printables.com/model/435566-medieval-palisade-wall-set Lookout Tower…
I say no supports, but you might want to support the ladder some to reduce bending. Print in Place Gate & Arch: https://www.printables.com/model/436334-medieval-palisade-gate-arch-print-in-place-no-supp Matching Wall Set:…
Gate and Arch - No Supports: https://www.printables.com/model/436334-medieval-palisade-gate-arch-print-in-place-no-supp Spiked Barriers: https://www.printables.com/model/435558-medieval-palisade-spiked-barrier Lookout Tower…
My wife and I are getting ready to start Jaws of the Lion, but I realized that the first scenario (and a few thereafter) has a cool set of palisades that I had no overlay for... so I made one! I quickly flipped through the scenario book…
Updates: May 2024: Added a very tight 0.1mm tolerance version June 2024: Added LED version I designed this for my kid after they got a kyber crystal on our Disney trip and wanted to wear it. The design is based off the Jedi crusader…
Palisade Version 2: more irregular stone work holes for the pin in each end more different bends This palisade is perfect to surround your fantasy village with. With 28mm scale it stands to about 4 meters. Print without support. A…
This really took forever to get the gates to print and work right. They are a little loose to allow you to scale this down to 80% or maybe smaller. Every part is built to print without supports. Get the Matching Wall Set:…
Defend your Viking village or fantasy stronghold with this modular palisade system! Designed for 28mm scale tabletop games, dioramas, and fantasy wargaming, these modular walls, gates, and corners can be combined in endless layouts to…
The fantasy Viking palisade with a gate. https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and…
2 parts, head and body. From the game Disablo. Full version available for sale. Category: Sculptures
Alliance Crusader model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Sharing these baseplates I used to make my trench terrain. They don't quite work out to the recommended board size so I recommend sizing to your needs.
I've included two versions of the barrel, one with the brotherhood emblem embossed on the sides and one without the logo. I've also included a suppressor. this model is designed to be assembled using #6 size screws, while the magazine and…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Print in horizontal orientation and with 6 Wall loops (100%) for strength. Should be printed with material that can withstand higher temperatures during summer. Support is recommended. Small pin needs to be inserted into the retainers…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Remixed the shield from kh4rj0 to add rivets and a cross. This file is at 200% for the Dummy 13 Knight armor by Martin_44601. I don't know if it will scale down well to 100% for the standard version. You do need to glue the handle into…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Drain hole in bottom. Scale to desired size. Not vase mode. Wow you made it down this far? Ok I'll tell you that palisades are typically made from felled trees around the same size. Limbs were hacked off with axes and bark stripped with…
Faceplate Prusa Edition ( Prusa Deck ) for Elgato Stream Deck MK.2 PETG material recommended, more flexible than PLA enjoy
I was unable to find a perfect cupholder expander for my Hyundai Palisade, so I made one. This one DOES NOT block the wireless charger, and you can leave it in place and still close the sliding cover. This is an easy print - no supports…
A tie crusader model suitable for tabletop gaming. Print instructions Category: Vehicles
Crusader Knight on a White Horse
V3, Décembre 2024 Mise à jour de la base magnétique pour laisser voir les poops en cas de bouchage et meilleur chemin (plus arrondi) V2, Novembre 2024 En récupérant les dimensions fournies par Kévin dans ses vidéos, j'ai modélisé et…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
The F-8 Crusader The Crusader is a single-engine, supersonic, carrier-based air superiority jet aircraft built by Vought. It was one of the last American aircraft to use guns as a primary weapon, earning it the title, "The Last of the…
This is a remix of the crusader helmet that was cut to smaller parts
The main gate of THE village comes with only four fence elements. With this extension and some patience for your printer, you can now enclose the entire village. I printed this without brim in a stack of 5 with some stabilising…
4-18-2024: V1.1 Edit. -Uploaded new version of door holder for increased durability. This is my attempt at trying to tame the beast that is the Slayer of the Realm Edition of Dungeon Crusade. You can purchase the game here.…
A very lazy and low effort remix. Go check out the original.
Print, insert next to button, and forget it! Slide this little print next to the auto-stop/start button so that it is lit up when depressed. It will stay depressed and turn off the auto-stop "feature" automatically, every time you start…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
PLA will easily deform due to heat of car in warm weather. I have printed in PETG and ABS, so far both are holding up to Southeast USA summer heat. This has a a 7mm radius for the sunglass area. I also have a 6mm radius I will upload for…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Twisting device for Pellenc Fixion tying tool (for vineyards) They break more easily than the originals but are so much cheaper. I print them in ABS by 9 (about 2h30 of printing) Torsadeur pour lieuse Pellenc Fixion (Pour la vigne) Ils…
Crusader at the Gate Category: Creatures
Used https://touchterrain.geol.iastate.edu to create model at 10 m resolution and 200 mm print width. Created label with Tinkercad.
Big Medieval Crusader helmet Medieval helmet based of helmets used in the late 13th century fits my head pretty well, although I added inner padding Inner diameter: 23 cm SCALE ACCORDINGLY!
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Keeps the auto engine off disable button depressed, so when the vehicle first starts it automatically turns the auto engine off feature off. Recommend PETG or ABS or ASA. it gets very hot in cars in the summer.
Brotherhood of the Cruciform Pendant(s), Indiana Jones and The Last Crusade Category: Props
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
3 walls combined to a longer and more impressive wall. You can mirror it for more flexbility. If you like it do not forget to give TRIPPLE G a like, too! Thanks. Have fun & The Emperor protects! :-) Material: PLA Layerheight: 0.2mm…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Crusader sword from cult of the lamb. 24in long at 100%. Added 1/4in hole for dowel to add strength if needed. The cross guard will need supports.
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Basic hooks to hold ipads on seatbacks to keep your kids entertained on those road trips without a dedicated in-car entertainment system. Dimensions are different between the 2nd and 3rd row headrests so I made models for both. I tried to…
Lampe vase classique avec torsades... Juste pour apporter ma petite pierre à l'édifice. Vous DEVEZ activer la fonction "VASE TORSADE" de votre logiciel. Cette fonction n'est pas toujours facile à trouver…
Crusader shield I made to go with a figurine.
a warrior lost in time from the crusades, ready for battle.
This is an insert to fit everything in the retail version of Crusaders - Thy Will Be Done. I added my own bags so I just made a bin to hold them. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Category: Toy &…
These are victory point ("influence token") markers for the 2018 board game Crusaders, Thy Will Be Done , by Seth Jaffee, published by Tasty Minstrel Games (TMG). And while these are my designs, they have permission from the designer of…
This insert will allow sleeved cards and magnetized miniatures, with a flush fitting box lid. It will fit the base game as well as all components from the Dreadnought expansion. I ditched the space marine dashboards as they took up too…
Print with at least 4 perimeters for sealing Can't be printed in vase mode
Bring the Dark Knight's legendary presence to life with this stunning 3D printable Batman figurine STL model that captures every detail of Gotham's greatest protector. This masterfully crafted statue showcases Batman in his iconic cape…
El nombre lo dice todo. Impreso con filamento flexible de Sakata
Repaint of model suitable for 5 color print with MMU3
Le modèle chenille crusader est moins détaillé que celui CHENILLE CRUSADER mais s'imprime beaucoup mieux.
Experience the thrill of bringing Gotham's legendary Dark Knight to life with this stunning 3D printable Batman figurine STL model! This majestic statue captures the iconic caped crusader in his classic suit, complete with flowing cape…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A resolute and battle-hardened figurine inspired by the…
Direction strength needs to be optimized, there are metal latches online, these are good likely good for temporary usage. Made in Free CAD, renders in blender. There are different configurations the images, they are believed to be a 4.5mm…
This is a print-in-place chain-style Rosary with 100% articulation between beads. It does NOT require flexible filament- the Rosary shown in the photos was printed in PETG. I am including the .step file so that artistic folks can redesign…
Trash can designed to fit in the little cubby under the center console on a hyundai palisade. Designed around using a grocery bag as a liner. For additional functionality and style recommend buying something like this material:…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Holy Crusader King, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
CRD-3K Crusader for Battletech (Old Style) This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
The Likeable, Lumpy-headed Hero1 Radiation Type: Heronium 332 Toxicity Level: High, Very High Occupation: Leader of the Toxic Crusaders De-Tox Tip: Don't be a bottlebrain - recycle glass! Toxie's my name; grimefighting's my game. I used…
CRD-3K Crusader for Battletech (New Style) This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
Earthshadow , Crusader of the Wretched ( Designed in Blender ) As you can see I have printed it out on my Geeetech A10T in PLA ( silk copper , silk lightgold and silk silver ) I use Prusa-Slicer , After you load the STL file click on…
I really enjoyed the model of the crusader pistol, but wanted a flame magazine.
Print at 0.08mm layer height with 0.1mm first layer. The Model is 150.08x72.54mm in size You may print at higher layer heights below the Base Thickness of 0.5mm The Max allowed Thickness is 1.14mm and the Actual Thickness is 1.14mm This…
"Up, up, and... get me a snack!" Complete your collection of Manzini’s misfits with this high-fidelity, static-pose figurine of Nat Nerd . This model is a frame-accurate tribute to his 1987 cinematic look, capturing the specific "thick"…
