Counting matching models…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I used PLA+, part cooling fan at 50%, 10 walls, 15% infill. Walls are more important than infill. For heavy use, print in Overture Easy Nylon or PolyMaker CoPA at 100% infill, then anneal and moisture condition. STEP File:…
This piece replaces the factory Barrel Plug of a Safariland 63xx Glock 17 Holster to make it fit 19 and 45 Models. Reccommended Settings: Heat Resistent Filament 10%+ Infill 5+ Perimeters 0.1mm Layer Height Print Orientation and Supports…
Hexagon Safari Wall Art addition https://www.printables.com/model/901975-5pcs-hexagon-african-wild-animals-wall-art
Airsoft QLS plates compatible with Safariland or Cytac/Amomax via adapter The male and female plates were remixed from (https://www.thingiverse.com/thing:3827837). Print settings: 25% infill 6 walls @ 0.4 or 4 walls @ 0.6 PLA or PETG 0.2…
Updated 9/10/2024 to require much less support material Included .step file and Bambu print profile Accepts the QLS Fork and is meant to be screwed to something like a desk or nightstand with wood screws. PLA is fine for this application.…
🐘 Abstract Minimal Animals – Wild Safari Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Lion, Elephant, Giraffe, and Zebra. The models are intentionally highly…
Printable thumb extension for the newer style of thumb releases on the Safariland ALS system. Increases size of lever while allowing for full movement and clearance. No supports needed when printed outside edges down. Hole diameter is…
I made this stand for my Lamy Safari fountain pens. I designed it to print with no supports and to be minimal like the pen itself. I recommend printing with a very high infill (90-100%) to add more weight to the base.
Update: Updated the model and re-did the interface for the Amomax side. Slightly thickened the whole thing and generally made it a bit nicer. Printing Instructions No support needed in the nut hole on the bottom. For settings I would…
This belt loop allows you to mount a Safariland ALS type holster to micro battle belt. This is for the belts that have 2" molle web sections. These belts typically have 2 half inch molle rows with a 1 inch space between them. Here is an…
Bookends in the design of different animals.
I needed a clever way to organize my Holsters. All of them mount to my rig via the trusty Safariland QLS Plate+Fork System , which does a really good job of locking your gear in place. I had some spare QLS Plates around that i could have…
Fits on Prusa Mini Nozzle: 0.4mm Material: PLA, anyone works Print: 0.2mm Perimeters: 3 Support: Not required Brim: Not required Infill: 15-30% Fill pattern: Gyroid (This is important in gridfinity pieces with magnet holes)
something messed up when exporting every time and that there are some lines, I just filled them with super glue and sanded them smooth. This file fits the wheelbase of the axial scx24 C10
When I ordered my 6354RDS - ALS Holster for my P320 I didn't know the QLS 22 reciever plates were "made to order" So I recieved the holster first. Since this is my first Safariland holster purchase. It was kinda useless untill the…
II found the Dino Balance Game to be intriguing, but my youngsters prefer safari animals over dinosaurs. That's why I chose to create this version instead. I plan to add more animals gradually to enhance the game further over time. I…
Remix scaled to 115% and the long edges flared to fit the profile of the ARB Safari snorkel for the 2005-2015 2nd generation Tacoma (part no. SS171HP ) Category: Automotive
I had a Blackhawk Omnivore holster (that I'm assuming uses a standard Blackhawk mounting pattern, so this should work for other Blackhawk holsters as well) and I wanted to mount it to my Safariland belt rig. Made this adapter in Fusion…
Lamy Pens have proprietary ink cartridge refills This file adapts the Pilot G2 Cartridge to fit the Lamy Safari Rollerball Pen Body. This File adapts the Pilot G2 refills that are shorter to fit the Lamy Safari Rollerball Pen Body. This…
Hardware To attach the Amomax hoster to this I would recommend an M6x14mm countersunk bolt. Versions There are two versions, standard and non-standard. Standard Standard uses the normal mounting solution with that bit at the top that…
This increases the size of the ALS release button. Most importantly, it extends it inward, toward the belt and provides a grippier texture. It improves the draw speed and reduces the chance of missing the button during the draw. This…
A set of 5 safari animal models for tracing. Each model has an ergonomic knob which makes drawing your safari animals even easier. Let your children explore safari and let them be creative! You can let them trace the animals by…
Super Fun Safari Fun pact including a low poly rhino, hippo, lion, flamingo, giraffe, and elephant.
UPDATE Added a version with room for magnets.
The release of the first few MMS Safariland QLS adapters! - Clean QLS Base Mount (No Holes, No Rail) - Short Male QLS Base Mount - Short Female QLS Base Mount - Long Male QLS Base Mount - Long Female QLS Base Mount - QLS Base Mount With…
This design reproduces the tire rim and rim keeper for the Playmobil Safari set Jeep. This play set was released in the late 1980s I think. If your kids have the jeep and a missing or broken wheel, this may do the trick for getting your…
Safariland thumb button replacement recommended 4 walls and at least PETG
Wall Art silhouette model of the Posche 911 Safari. Adjustable size. I accept model suggestions or ideas you might have
Bring the wild to your tabletop with Safari Stack, a physics-based balancing game designed to challenge kids' fine motor skills and patience. Whether they are playing solo or competing with friends, the goal is simple: keep the animals on…
Sometimes you run out of ink while you're out traversing the world and your cartridge in your pen runs dry. Now you can bring a spare with you anywhere you go in a convenient little trinket that looks just like a Lamy Safari. Just like a…
Farm and Safari animals for cookie cutters. imprint stamp together the cutter. The animals are. bear, bunny, cat, chicken, dog, elephant, firaffe, horse, lion, monkey and pig.
Update 10/9/2019 Added polyround.scad which was a needed library that I was missing! (thanks to bugout3d for pointing that out) I hate hate hate the stock arm cuffs on the Minelab Explorer Series. I recently got back into the game with a…
UPDATE Added a version with room for magnets.
Il s'agit d'une entretoise type Spacer Kit T pour étui SAFARILAND avec une épaisseur custom. Idéal pour l'adapter parfaitement à vos étuis et autres plaques. N'hésitez pas à modifier l'épaisseur voulue. D'autres designs à suivre ;) IG :…
just an adapter that mounts in a straight angle
3D printing settings Printed on PLA or ABS or similar. 0.2mm minimum lines to have a good resistance line walls: 4 bottom lines: 6 lines top lines: 5 lines supports: yes infill density 20%
Size in mm is: 42 x 32 x 7 Screw hole: 6 mm
Current Safari Cookie Cutter set includes the Lion, Tiger, Zebra, Giraffe and Hippo. and I plan on adding other animals in the future… latest additional is the Gazelle. All Cutters walls are 0.8mm thick and I usually iron top layers.
This is a classic safari hat for Dummy 13. You can now adventure through your desk or counter in style.
Supernote AX2 Manta LAMY Safari Vista Pen Clip Printing Recommendations For best strength, print vertically (with the layer lines perpendicular to the Supernote)
Extender per sgancio fondina safariland als destra
The Lamy Safari's cap is held together by a plastic screw going into a brass bushing. The screw is fragile and can snap if too much stress is put on the clip. This is a replacement for that screw. The thread in the bushing is M5, which is…
2/XXX LAMY Safari Ink and Pen Holder I'm doing a challenge where I'll upload 1 model a day until I reach 10k Prusameters or more so I can own a PrusaMini or PrusaMK4 This is a Lamy Safari Ink and Pen Holder. It features a slot for one pen…
QLS plate for mounting anywhere. 3 Screw holes are provided. Remixed for even less supports and material! Printed flat on bed w organic tree supports Made and tested with PLA - .3/.6 - 2 Walls -4 Top/Bottom -
A small but handy part that can be mounted to Ikead Skadis pegboards allowing you to attach Safariland QLS gear to it. Based on my previous design . I want to thank user Clay2F for creating a Skadis reference file . Recommended Print…
If you've been hunting for something on the wild side to protect your furniture, these animal print coasters may be just what you need. Six different safari themed animal prints. Cheetah Crocodile Elephant Giraffe Tiger Zebra Provided in…
With this part you can convert a Safariland 7TS -series holster from a short slided version to a standard slided and vice versa. G17 plug fits for example Glock 17, 22 and 45, 19 with threaded barrel G19 plug fits Glock 19, 45
Dieser Ring kann auf den Lamy Safary Füllferderhalter gesteckt werden, wenn der Deckel andauernd abfällt. Er ersetzt den zu dünnen alten Ring und gibt der Kappe so mehr halt!
yo use pet g de dos colores para destacar rejilla y logo
I made this one in two parts for easy printing without support. You will need to glue it in place. I printed everything in petg. Nozzle size 0.4, standard cura profile.
Muzzle end plug for Safariland 63XX for a Glock 34 to adapt to a G19 or G45 length slide. This will let you use the G19/G45 length slide in the G34 holster with or without a light. I've also included a G34 end plug that allows you to use…
This works with the 0.5mm Pilot G2 refills. However when holding the Safari at a normal shallower angle the Pilot cartridge is more scratchy than it should be since it's so fine.
Needed a way to attach a Safariland style receiver plates to my belt. The plate I used as a reference might have some differences to actual Safariland plate, mainly the orientation of the T-nuts. The MOLLE belt attachment connects to the…
This is a belt mount / belt plate designed for OWB holsters using the Safariland-style hole pattern . The plate is shaped to sit comfortably against the body while keeping a low-profile and secure attachment to the belt. It is intended…
I made this simple model to fill up the space above the Supernote pen refill in a Lamy Safari Rollerball body. My refill snapped into the front of the body with an audible “pop!” and stayed put, but rattled back and forth a little. This…
Safariland NUBMOD als after 2024
Convertor from Glock 17 to Glock 19 Safariland 6354 (with Surefire X300). Made primary for airsoft holster copy from Wosport, but usage better with 9mm (the "pin" diameter is 7,7 mm - same as airsoft copy btw). Thanks to this piece, it…
If you have the Playmobil Safari Jeep, you may need the spare gas can - aka jerry can. This is an easy print. I printed it 4 walls at the finest resolution for toughness, and lightning infill because it's strong enough.
Scribble Safari: This learning toy playfully promotes pre-writing skills. Five different shape exercises train eye-hand coordination and fine motor skills. Ideal for strengthening the writing hand. The pen is safely stored in the board.…
This cheeky hyena brings playful mischief and safari vibes to your collection! With its sly grin and quirky details, it’s the perfect figure for anyone who loves animals with a bit of attitude. Great as a fun desk companion, gift, or as…
Safariland duty holsters for the compact 4" slide Walther PDP contain a nylon barrel plug to stabilize the pistol. This is too long for the PDP Pro SD with the 4.6 barrel. Other solutions involve simply removing this plug. However this…
Safariland QLS compatible Fork / prints without support
After my Lamy Safari inked my clothes twice, I searched online and found a solution to making the snap cap tighter. The forum suggested taping the rubber piece inside the cap in order to create a tighter click. It worked but I don't like…
Safariland NUBMOD als before 2024
Design/Spec request by my son that wanted to mount a QLS device (holster) to his wheelchair using the 1 inch ram mounting system. Very sturdy when printed in a carbon fiber or nylon filament, PETG works pretty well. Suggest printing very…
This is a simple Lamy safari filler cap. I printed at 15% infill . I used PLA, but I think other filaments will work, besides TPU. If you have any questions, feel free to contact me. I'll create a V2 at 40 likes.
Here's a spare tire for your Playmobil Safari jeep. Long ago I designed the rim. Now here's the spare tire (TPU). This is a hollow tire, with side walls, designed to be installed onto the rim (copy provided). Once your tire is printed,…
These are some safari animal cookie cutters I made for my brother's baby shower. They turned out great! NOTE: PLA is food safe, however, for your awareness, be advised: brass print nozzles may contain small amounts of lead (which is not…
This adapter lets you mount a Safariland QLS Receiver Plate to the Coolermaster Qube so you can attach a Holster with QLS Fork. i used this model in the rendered assembly for demonstration purposes If you need anything, feel free to reach…
Mit der Grillzangenablage für den Cadac Safari Chef 30 Grill hat das Grillwerkzeug endlich einen festen Platz. Die Ablage wird am Rand eingehakt und durch eine Nase, die in eine Aussparung der Grill-Auffangschale passt, arretiert.
In the game, players create resort hotels with the goal of driving their opponents into bankruptcy. The original hotel buildings are crafted from plastic and cardboard. After years of play, some have been lost or damaged, hence these…
Belt caddie to hold 2x5 Sillly Shells for faster reloading. Originally made for use with Breacher (also by Sillybutts). Caddie frame designed to attach to a Safariland QLS 19 Locking Fork.
Printed with PLA 0.12 mm layer height 20% infill No supports
Lamy Pens have proprietary ink cartridge refills and are a custom length (11.5 cm) This File adapts 3rd party ink refills that are shorter to fit the Lamy Safari Pen Body; such as the popular Retro 1951 Pen Refill (Schmidt 8127), and the…
Designed to fit safariland holsters and belt spades. There are three versions depending on your needs. V1 is just a straight piece that will fit on my Prusa Mini diagonally across the plate. V2 has two 25 degree angles and is more useful…
I think Safari was Binary Arts best Rush Hour variant. When the puzzle comes up for sale on eBay it is quite expensive. You can use the Railroad Rush Hour variant board with these game pieces instead. Frankly I think they are better than…
This 3D printed imprint block features six different safari animal motifs that allow children to create unique prints in play dough, clay or sand. Each page features a giraffe, hippo, monkey and other animals from the African savannah,…
Hooks require support
This is an adapter that allows Pentel EnerGel LRN5 refills to be used in a LAMY Safari. The fit inside the barrel is slightly loose, but the pen closes properly and writes without any issues.
I did not create the original file. I took a dxf file and cleaned it up a little then created the stl file. Free to share but not to sell. No specific printing setting but I highly advise using ASA or similar filament. Simply attach it…
Embark on an adorable adventure with this charming 3D printable hare figurine that's ready for the wild! This delightfully detailed STL model features a courageous rabbit adventurer complete with safari gear, backpack, and explorer…
Replacement part for the Safariland QLS paddle holster. Keeps the holster from being pulled up and off your belt.
OVERVIEW The Safariland Comp III Donut Loader is a simple bench tool designed to make loading Safariland Comp III speedloaders faster, easier, and more consistent. Compressing the Comp III spring while inserting six cartridges can become…
We bought this dog brush and immediately sliced our fingers tying to remove fur from the tines/blades. We were worried about leaving the brush in a tub and cutting our hands when digging in the tub. So this is a sheath that covers the…
For years the snorkel on my Ford Courier, hasnt been properly fitted to my car due to being damaged. The part is no longer available & no wreckers seem to have the part. So I bought a 3D Scanner & a 3D Printer & decided to learn Blender.…
Length adapter to use a Uni-ball UMR-87E refill (Signo 207/307) into a Lamy Safari rollerball. Printed with PLA, 0.4mm nozzle, 0.2 layer height, 2 outer walls, 2 top and bottom layers, on Ender V3 SE.
I made this for my 1998 Astro Van. I'm not sure if it will fit earlier years. I was missing one of the rubber cupholder bottom inserts when i bought it. Print using the most flexible TPU your printer can handle. Category: Other
I have a whole collection of app coasters if you want to check them out. Each colour is on a different layer so you can pause and replace the filament at each colour change when 3D printing. Enjoy :) Category: Kitchen & Dining
This Safari Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Sword and Shield. It’s part of an ongoing series of Poké Balls adapted…
Enjoy this high quality model of an elephant from our Safari Animal collection! Use it as wall or desk art! Enhance your home, bedroom, office, desk, or creative space with this original design. 3D Printable Collection for Interior…
Bouton pour appareil photo du jeux photo safari
Insert do krabičky Cáklé safari, vydavatelství Tlama Games.
This is a spacer/insert for use when using a Lamy EMR grip/module with a Lamy Safari Vista body. This is not a functional piece, or needed to build this custom EMR pen, just fills out the empty space with a color of choice. Could also add…
