Counting matching models…
If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon A quiet moment of spring you can keep between the pages. Sakura [Framed] captures a windswept cherry blossom tree set inside a…
Changed the windshield rim/frame, bottom side is 3mm wider and top side is original width or change as you like (provided step file).
Sakamoto Days Coin Hack caddy 1€ model
The Healing Heart Keepsake Box is a unique and symbolic design perfect for storing precious mementos or gifts. Its heart-shaped body and lid, split in two like a broken heart, evoke feelings of love and loss. The lid features two pieces…
I had some trouble with the Ram mount meant to go in the stem of a triple tree. I figured it was partially due to how the stem of the Ninja 650 (2019, if it matters) has a hex hole but that's only about 10mm deep. After that, it gets much…
Printed without support (print on handle)
The Sakal Air Conditioner Remote Control Stand is a simple and practical wall-mounted holder for your air conditioner remote. Designed for everyday use, this stand ensures your remote is always within reach. Design Features: Material…
Vertical desk holder designed for Sakura Micron pens. Holds 24 across two tiers. Also Rotring Tikky, though they stick out a little higher. Holes are 11mm wide so anything else with a barrel that size ought to work. Print Settings Printer…
Changed the windshield rim/frame, bottom side is 3mm wider and top side is original width or change as you like (provided step file).
KFZ-Halterung für die Kopfstütze zurm Aufhaengen eines Sakkos oder einer leichten Jacke. Lochdurchmesser 14,4mm - Lochabstand (Lochmitte zu Lochmitte) 130mm (29mm je Teilstueck, 72mm Mittelstueck). Fur andere Maße der…
Project: Nobara Kugisaki Creampie Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 129.83x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm…
Wall Art Silhouette model of the Kawasaki Ninja 250R 2008 superbike. Adjustable size. I accept model suggestions.
A keychain for Kawasaki ninja 300 owners and fans made properly. I've uploaded all files including .step and .f3d and the base and letters are split in separate components for easier color asignment. Printed with a Bambu Lab P1P with an…
Experience the engineering marvel that is the Kawasaki Ninja H2 with this solid, intricately detailed 3D printable model. Designed for motorcycle enthusiasts and collectors, this model captures the aggressive styling and powerful presence…
This is a fan-made 3D model of the Sakamoto Days logo. Flat logo design, easy to print and display. Can be scaled up or down depending on your use. Any feedback or ideas on what to make next is always appreciated!
This is Sp33n, a Roblox studio user that found out how to use building tools in actual Roblox games. (sounds a lot like another DOD character...) His body includes many video game design references, such as the movement/translation…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Sakura Front Shock Mount Higher plus 1mm, 2mm and 3mm.. For those who have short shocks (52mm see the picture, i use +3mm mount) and they are weak (even the spring is pre-tensioned at maximum) you can even higher the mount to help it..
1x1x1x1. with extra parts to make Forsaken 1x1x1x1. Print in PETG with tree supports for best results (In my opinion). UPD 1/13/26: Remade face to be more accurate. Added old face to Extra parts. Added full Forsaken version parts. UPD…
These are remodeled 3dSets Sakura tires with aggressive tread for asphalt. They are printed with Siraya Tech TPU 85 on CoreOne. There are four unique tires in the set for Front, Rear, Left, Right.
Credit to Mr.Makeit for the Body, https://www.printables.com/model/1410760-upd-articulated-roblox-figure
This is the Gourd skin for C00lkidd from the hit Roblox game Forsaken turned into an action figure.
Print in PETG with tree supports because his crown WILL fall off. The 2-sided body parts fit together. If they loosen, use superglue. UPD 2/3/26: rotated heads for better printing of the masks.
Print in PETG with tree supports or risk getting Void-Rushed. For the Extra Parts, the head with the hole on the back in for an insertable void crown. Theres also the crown by itself and a head with the crown on it. UPD 1/10/26: changed…
Print him with PETG and tree supports because c00lkidd already used Walkspeed Override. UPD: 3/31/2026 Apparently the body model was corrupted. I just downloaded a fresh version and then put it here.
Credit to Mr.Make_it for the base body
SAKUMI | Table Lamp E14 & E26/27 I aimed to design a lamp in which is both the shade and the base could be printed in vase mode . The challenge was to give the shade a sense of volume despite the constraints of vase-mode printing,…
This is the Gasharpoon skin for John Doe that originates from Limbus Company turned into an action figure.
These banners are based on a design by GWGumby , but decorated, and improved for multi-color printing. The most noticeable changes are the thinner banner, and the border around the banner. You can choose to print the border in a different…
I have included two models in this post. One of the keys is a blank that you can use to create your own key. Just take an image extra the outline and extrude in 1.1mm on each side. Make sure to mirror the mesh on the other side BOTH on…
SAKU[MINI] | Table Lamp E14 & E26/27 Meet the MINI version of the SAKUMI table lamp . I aimed to design a lamp in which is both the shade and the base could be printed in vase mode . The challenge was to give the shade a sense of volume…
Put in the comments an image of your Roblox avatar and a name, and i will try my best to make a figure
Mix and match bottoms and lids or print for your whole friend group! updated 2/6/26(m/d/yy) with stronger lid and walls on bottom section updated 2/7/26(m/d/yy) with easy open bottom section
Did you break or lose your license plate whilst engaging in toomfoolery? This stock Kawasaki license plate bracket is here for your convenience. Disclaimer: This model is part of a larger collection of ZX-4R 3D scans that I have on my…
Mostly working copy of the Sako P94S (Finnfire) .22 LR magazine. Loads reliably about 80 plus% of the time, I think it mostly due to the home-made spring I'm using, it's hard to get the spring pressure just right. If something goes awry…
"Hey friend! I heard you really enjoyed my parties! I made you this gift! Thank you for playing with me!" Print in PETG and Tree supports!
3Dsets cars are amazing as designed, but with real lights even more. I made a rear lights for Sakura with 2mm slots for flexible LED filament form Aliexpress. It can be bended and freely cut for reasonable price. Print the first two…
About My old Kawasaki H1 500 projects are in various states of disrepair and some parts are either too expensive or impossible to find. Figured this would be easy to model and be around for anyone who needs the same thing I do. It looks…
If you have problems, please tell me about them
If you have problems, please tell me about them
Bosnian national simbol (Bosnian Lilly). Hang inside your car or use it as a keychain!
A slim bookmark design that captures koi and cherry blossoms. No AMS/MMU required, only three color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Matte…
Print on a multi material printer and assign the respective color you want to use to the translucent parts. Cut up an LED strip into smaller strips and glue it to the backplate for a more even light distribution. Add another strip on the…
Voici des toe block de remplacement pour les Sakura d5 /mr d'origine les block on 45mm entre les tables en comparant avec les autres modèles de véhicule j'ai vu que c'etais beaucoup trop et le kit que sakura vend revient a plus de 100$…
this is 007n7 forsaken figure. i apologize if something went wrong while it printing.
Jinwoo's Kasaka Venom Fang Dagger (Solo Leveling) Dimensions (mm) : 138 x 142 x 26 I used around 20 grams of filament, supports must be enabled
I'm open to selling a commercial license for use in your builds. Feel free to reach out to me. The Story of the "Saka" The Development I started out this design trying to build a simple case for a friend's Batocera that I set up. I…
SAKURA | Scalable Pencil Holder Inspired by spring cherry blossoms, SAKURA brings a soft, floral touch to your desk. 100% scalable , print it at any size you need Go jumbo-size to tame your chaotic desk jungle, or tiny and adorable for…
Sakura blossom polymer clay cutters. Files are pre-oriented and work with a 0.4mm or 0.2mm nozzle. Includes: Large flower outline Large petal outline Medium flower outline Medium petal outline Small flower outline Small petal outline
Thank you if you support or share this model, please get back to me on the joints ( I printed them and it worked) so yeah, thanks.
SAKURA | Pendant Light E26/27 After designing the scalable SAKURA pencil holder , I kept looking at it from all angles and thought it would make a great pendant light. So here it is! A floral pendant light built from three intersecting…
Sakura D5 battery holder, 96mm battery length, designed to replace my bracket that broke.
Credits to @FanbloxCompany for the torso, head, and joint models.
Cherry blossom season in traditional Japanese gardens. Snap-fit frame: press the back to lock, push the front to release No AMS/MMU required, only three color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16mm…
Lightsaber with 3-stage telescopic mechanism driven by planetary gears. The model includes only the opening blade and all its components. In my profile , as they are ready, you will also find the aesthetic slaves to create the swords of…
Complete your saker light with the aesthetics of your favorite characters from the Star Wars saga. The files only include the aesthetics, for the mechanism go here
Kawasaki keychain, with a simple and easy design for a quick impression and low material cost.
Pen holder for 54 Sakura Koi Coloring Brush Pens. Fits the complete set of 48 colours. The pens are spaced so you can easily pick up a pen from the middle.
Kupplungsschlüssel für die Kawasaki GPZ. Wird benötigt um den Kupplungskorb zu fixieren und die innere Mutter zu lösen / befestigen.
The Healing Heart Keepsake Box is a unique and symbolic design perfect for storing precious mementos or gifts. Its heart-shaped body and lid, split in two like a broken heart, evoke feelings of love and loss. The lid features two pieces…
Inspired by a cherry blossom trinket tray and decided to make a stackable version with lid.
I got a GIVI tank bag from a pal for a couple of quid, problem was he'd thrown out the flange (suppose that didn't matter as it wouldn't of fit my bike anyway!) and unfortunately the plastic GIVI tank mount I think original part…
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. Check out other models in this same location, like Kaminarimon. ⚠ - - Please read the Print Instructions further below - - ⚠ 宝蔵門…
A selection of alternative licence / number plates for Sakura RC Model Car from 3DSETS. I sliced these in PrusaSlicer with two colour changes, printed on my Prusa MK4. The main body is black, then a couple of layers of white/yellow,…
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 44mm x 33mm 6mm Keyring hole
Use skadis_holder_direct for screing the Skadis fasteners directly into the 3D printed part, whereas skadis_holder_inset_m4 requires a threaded insert to be used.
somon saplama sistemini taklit ederek döner saklama kabı yapmak istedim umarım sizin için kulanışlı güzel olur
A recreation of SAK-D4832A Iron Disc for SAK-D4832. A 1/10 Scale Magnetic Body Post Cup for Sakura D5MR. Use with a ¾ inch zinc washer [example: https://www.homedepot.com/p/3-4-in-Zinc-Flat-Washer-804616/204633090] and double sided tape…
A powerful reminder that in Night CIty, no matter how the dice roll, the house always wins. Prints in three parts, required print dimensions 200x200x250mm
A custom holster for my EDC kit that keeps my key chain from becoming overloaded. It includes space for a Mini Champ Alox, a peanut lighter, and a Rovyvon A8. The holster has a place to hold the lighter when lit so it can be moved without…
Para hacer éste proyecto se necesita PLA o Pet-g translucido (Recomendado). Todas las piezas están separadas para poder imprimir tranquilamente. De la parte trasera hay 2 opciones completa o tapa final con rosca por si hay que tocar algo…
Simple emblem for side covers- the result name sounds funny in Polish language (KawałSuki - eng. piece of huge bi*h). It fits especially for Kawasaki KLV which is in fact Suzuki DL1000 (licence). After traffic accident I decided to rework…
this is the part that holds the lock cylinder to a Kawasaki kqr side or top luggage case. nobody sells it and so far there is no models for it other than mine. if you buy Kawasaki luggage 2nd hand and the cylinder and “lock cylinder…
I never liked how exposed the Corsair 4000 Case is, it looks too naked. I have printed this cover before, with aside the changes being an asymmetrical design, the connectors have been thickened to be rigid. Would also recommend printing…
Insert for the base game of Forsaken Forest. Two token trays to have easy access to wander tokens for all players, this insert replaces the bag which has them all mixed in together. Also has separate slots for the different card types +…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Starfighter is very realistic Print in place kit card , Assembly required
This is Sakura. theres a lot of features that this blaster can offer, such as being able to go from ~150 fps up to ~250 fps on a single spring and barrel combo (SF-25 and 40CM Kury barrel) using only spacers! And that can obviously go…
Kawasaki 33034-016 Swing Arm Sleeve F6 F7 F11 G3 G4 KD KE KS KV G31M G4TR KD175 KD125 KE175 KE125 KS125 KV100 Centurion Infill :100% layer height 0.2 material: abs + epoxy resine for more resistance
it's a replica of the kawasaki klr 650 turn signal shell, with support in the printing process and 40% fill, pla+. I suggest to adapt the gcode to your printer. My print has a lot of small bridges(maybe the no-load movement speed it's a…
A cherry blossom stud for @MagnumDanger's giant LEGO holiday wreath. I printed these with supports. Thank you lisa30 for the original cherry blossom model. Wreath can be found here: https://www.printables.com/model/218071-lego-wreath
The dual extrusion folder contains 4 files. There are 2 versions of the USB print. The ones with the Arasaka Logo and one with the Relic logo. There are 2 parts the Black and Silver parts. Merge these 2 files in your slicing software.…
![Sakura [Framed] - Bookmark](https://media.printables.com/media/prints/0d520688-e86a-4548-b148-7eed6eec0de6/images/10525574_71d554f9-a0f7-4e17-ac13-147ad72e74cb_e00e90cc-3129-4ef9-a239-f6bcdf32c4b8/20250824_154505.jpg)
![SAKU[MINI] | Table Lamp E14 & E26/27](https://media.printables.com/media/prints/30c0809f-8721-4bc7-b390-4c794aa2b804/images/11861074_678b364b-c6cd-48cd-b6bb-817cb3d22572_5ac0c50b-2ae9-46e6-b275-3c347d260cc9/sakumini_table-lamp_perspective-on.jpg)
