Counting matching models…
3d miniature of Los Santos, from GTA V. Model created in Blender using the openiv software. This version is still a test phase, I will try to release a V2 that goes to fix the division of sectors, so as not to leave pieces too small to…
Santorini is a 2-4 player board game that's almost completely made out of 3D shapes that stack on top of each other, which makes it perfect to 3D print. You can find the official rules of this game here:…
This is a remix of a remix. This planter captures the essence of Santorini, Greece. The drains in the bottom of the planter will drain directly into the pool, filling it. This can be printed with no supports! I added authentic looking…
3d miniature of the iconic city of Los Santos (GTA5) Slicing & Printing Details This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights. Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even…
Me being lazy to go to the store to get my own Santorini desktop game I gave myself the challenge to make a slight knock-off copy of the game with a sliding box, where the lid acts as a game board. This version is the basic version of the…
I wasn't happy with the printable versions available out there, so I made my own. This version has stable game pieces that won't shift during play. The design replicates the original game as much as possible without requiring printing…
Portable version of the famous game Santorini. The game board is embedded in the box, which contains all the pieces to play. My recommendation for printing: 40 tower blocks (up to 44 fit in the box, but very tight) 16 Dome 3-4 pairs of…
print in 0.2 layer height, PLA or ABS or PETG change color at layer 4 Added PrusaSlicer 3mf already set color change
Choosing between the Cartier Santos Large and Medium is a challenge, but 3D printing provides a solution. By printing 3D models, I gained invaluable insights into their aesthetics and fit. Note: The Santos de Cartier watches boast a…
Here is a 3D board for the game Santorini. The reliefs prevent the buildings from moving like on the original board. I made a V1 and a V2 for the players who have the first version (kickstarter one) and for those who have the second…
Knife protector to store a knife in a drawer. I use this for travels, so I can always have a good knife with me. Embedded magnets in the print allow it to stick to the blade.
Printable japanese style handle, haven't found any specific drawings or instructions how to make this handle in traditional fashion so give it a try or use it as a template for wooden handle Assembly and blade locking is left up to the…
These are meeples I did for the Santorini Boardgame. They are supportless
This is a remix of Santorini Pocket Mini by sys_er26 and Gut Shot Games - Photo Caddy Board Game Insert Collection Essentially this is a combination of the 2 making a fully playable version of Santorini to fit into Photo and Craft Keeper…
Using the https://www.printables.com/model/53253-parametric-kitchen-knife-sheath-improved-remix parametric file, I made a sheath for my Victorinox Santoku. Printed with the thin, non-curved side down in Prusament PLA. Fits well and…
Printable template for traditional shape japanese blade, made this prior to production, you can scale or stretch it within slicer according to your personal preferences until you find the right template for your needs (before production).…
3D Topographical map of the island of Santorini. This model has exaggerated topography to make the counters stand out a little more. The code includes a color change to allow the water to stand out from the land.
There are numerous builds of the Santorini board game and its Golden Fleece extension, but none so far contained the Ram Figure, so here it is. I've combined the head of PrawnicConsumption's Aries the Ram with nwgraphics's Pedestal.
Clip for a firm attachment of the box lid. If you like it, please leave a review or provide feedback. Your thoughts and opinions are greatly appreciated! OBI Santos Box Large (41L):…
Yeehaw, a knife sheath for your fancy knives. I went three years just wrapping my ole reliable santoku in a towel and some rubber bands. I think it's time for an upgrade. This project requires: [7x] m3x5x4 heatset inserts [voron spec]…
This is the Santo Domingo Temple from the Church of Jesus Christ of Latter Day Saints.Enjoy! Category: Sculptures
Remix of box for Santorini board game by brinkbeat, requested by another user Modifications: Added compartments to game box to organise different different types of game piece Increased overhangs around top edges for more secure fitting…
Printed with PLA vertically. Requires a skirt for good bed adhesion Please share your Make:) Like the freebie? Feel free to buy me a cup of coffee with the link above ;)
Remix of "Meeple builder for Santorini" from Guille Mytho for the "Pocket Santorini" from MioPrint
To replace a missing cupola for the Santorini game, I designed a model easy to print. It's not as thin than the original molded part but it doesn't require support for the roof part. For supporting the groove, I included a 0.6mm border…
Coin, spiral and arrow token to use in Santorini boardgame as replacement or proxies. Update 191023: Fixed a hole in the coin. Print instructions Category: Toy & Game Accessories Summary Coin, spiral and arrow token to use in Santorini…
A very simple incense stand for palo santo . Whilst the stand works for all palo santo pieces I've tried, I imagine the shapes and sizes can vary wildly. Please check the drawing prior to printing. Usage Press the piece into the grip…
I redesigned the original models to be a bit more sturdy and less likely to break. Printing Instructions: 100% infill Do not go too fast or too hot, because of the thin handles. I printed the first layer at 210°C and the subsequent ones…
For necklace, two different types. One with just a hole on the top and one with a loop (to fix a necklace) to it. Customer ordered and disappeared after all the work was done. Uploaded for the community.
Model for a new handle/brace for the AEG Santo fridge and freezer. Original is in cast aluminuim and breaks. This is designed and printed by me for a friend that had an issue with breaking handles and now they are no longer avalible as a…
I could not find (free) inserts for this version of the Santorini board game. Check the pictures if you have the same version (second edition). Consists of trays for all the game pieces to replace the plastic bags. I think it is a neat…
Personaje del podcast "El Pasquin" : fácil de dibujar en 3D, su principal gracia es hacer que el Buho se escuche inteligente y sensato, su logro mas grande es conocer a Ramiro Ramirez y ser pariente o conocer al Dr. Adán de la Peña.…
Saya pro kuchyňský nůž Tefal Santoku opatřena samolepicí magnetickou fólií tloušťky 0,5 mm. / The Saya for the Tefal Santoku kitchen knife is equipped with a self-adhesive magnetic film of 0.5 mm thickness
O Peixe em chaveiro giratório! O escudo do Santos gira dentro do aro e já sai girando da impressora — print-in-place, sem montar nada. 🔧 Sobre o modelo O disco com o escudo gira dentro do anel e sai pronto da impressora, sem montagem.…
This clamp is specifically designed to fit “OBI Santos” boxes and their lids. Also, they allow some clearance so a stripe of sealing tape (e.g. foam tape) can be applied on the outer edge of the lid. Depending on the material (PLA, ABS,…
The inner section of the dome is modified to improve printability
Hi all, I have designed a shiv for the Victorniox 17cm Santoku knife. You'll need 2 round magnets 5x1mm for it to work properly.
Zum Schutz der beiden Sher scharfen Berndorf-Messer
As I really love the original design, I wanted to make some small improvements for even better gameplay: Lid locking mechanism Prevents the box from unwillingly opening after storage or during play Orientation guides for the 3rd level…
Printed at 0.15 layer height. Printing the Color .jpg file the same size as the model will allow you attach it to the back of the lithophane to show a color lithophane when backlit. I using spray adhesive to hold the printed picture in…
This is an alternative pawn for the incredibly awesome Santorini Portable Game by JR_Jae ( https://www.thingiverse.com/thing:2202667 ). It resembles the letter "O" from the original Santorini logo and is reachable even between two towers…
The original coffee container was so big for my use so I designed a new one to only put a few grams of beans.
Santorini Orthodox Church Coordinates: 36°27’43.67″N, 25°22’34.62″E The Church of Panagia Platsani is undoubtedly the most famous and impressive church in Oia and the entire northern part of the island. It is located in the heart of the…
With this board the game can be played and the box can be closed. It is build as one piece, instead of the original two pieces. All edges of the board are the same, so in any direction you can slide in the board to close the box. The…
Porta-Copos SPFC Porta-copos inspirado no escudo do São Paulo Futebol Clube, desenvolvido no Fusion 360 com design minimalista. Especificações: Dimensões: 100 x 100 x 4 mm Compatível com copos, canecas, latinhas e garrafas Pode ser…
une simple bague permettant de cacher les cables du 2eme ventilateur il suffit juste de la mettre en place, percer les trou et viser les 2 vis (ici c'est du m2)
Place the building parts in each predefined insert, here's the detail for added parts : The Dice_SphinxTokens holds the dice and 3 tokens associated with the sphinx's game, no need to place them cleanly you can throw them in and be good…
This is my remix from the great work of Deludik. I remixed the boxes to fit the new GameFound Pantheon Collector's edition 2025. The heroes box has room for the new miniatures and all acrylic tokens (except the round player tokens and the…
Its an extrusion from GPX data file about 1 lap in 3h MTB race in Monsanto (Portugal) 2022. All done in single speed.
jednoduchy drzak pro santovou kulicku
I'm a huge fan of the board game Santorini and cats! This is a re-skin of the original Santorini board game. All the building block pieces have been replaced with cat tower pieces. Make your own Isle of Cats! Board game:…
Some additional player pieces for the game of Santorini. (model I 'remixed'). A very fun game Weapons did not really fit the 'worker' role, so i made some in shapes of various tools: shovel, saw, trident/fork, axe, hammer and sickle.…
Designed to fit two 16,5 cm Kiwi santoku knives. You can get the knives on german Amazon: https://amzn.eu/d/1zTj3sr
This crown was made to fit an old European figure of a saint that I own. It was also an experiment in scalability in resin printing. It's very scalable; the smallest I have made is just .20" in diameter at the ring base, with no loss of…
I long was unhappy with the bags I was using to organize santorini, but when my kids started actually playing it with me, it was time to take action. Especially annoying was fitting the largest base blocks into the box, so I started out…
Moulage de tuiles pour santons - Tile molding dimensions tuiles : 28mm x 12mm x 3.5mm épaisseur 2mm
O chaveiro giratório do Renan Santos e da Missão! Cinco artes: a onça da Missão, o "Quem é Renan Santos?", o logo missão, o "Prendeu, matou" e o 14. O disco gira dentro do aro e já sai girando da mesa: print-in-place, sem montar nada! ⚠…
Pouzdro pro přepravu nože Victorinox FIBROX SANTOKU 17cm. Modely doplněné o externí podpory pro jednodušší tisk. Připraveno pro tisk ve stojaté poloze s podporami. Na noži drží zacvaknutím na ručce.
👋 Bem-vindo a mais um modelo AGM Maker 3D! Obrigado por conferir este modelo! Cada projeto é desenvolvido e testado com cuidado, focando em impressão fácil, montagem simples e um ótimo resultado final. PORTA COPO STANLEY - RENAN SANTOS 14…
The inner section of the dome is modified to improve printability
I could not find (free) inserts for this version of the Santorini board game. Check the pictures if you have the same version (second edition). Consists of trays for all the game pieces to replace the plastic bags. I think it is a neat…
This crown was made to fit an old European figure of a saint that I own. It was also an experiment in scalability in resin printing. It's very scalable; the smallest I have made is just .20" in diameter at the ring base, with no loss of…
For necklace, two different types. One with just a hole on the top and one with a loop (to fix a necklace) to it. Customer ordered and disappeared after all the work was done. Uploaded for the community.
I long was unhappy with the bags I was using to organize santorini, but when my kids started actually playing it with me, it was time to take action. Especially annoying was fitting the largest base blocks into the box, so I started out…
I'm a huge fan of the board game Santorini and cats! This is a re-skin of the original Santorini board game. All the building block pieces have been replaced with cat tower pieces. Make your own Isle of Cats! Board game:…
Yes, I did cut all the veggies shown with this 3D printed knife, even the tomato. But it wasn't pretty. I designed this as a test to see if a 3D printed knife blade could cut anything . The answer is no. What it really does is sort of…
A cover for the Kuhn Rikon ICED santoku knife. The blade is held in place with a spring loaded lever. Use your thumb to release the blade. With your slicer you can emboss your name or a label to the side of the cover.
Customized version of http://www.thingiverse.com/thing:125109 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=125109 Instructions Using the following options: knife_show = 0 knife_length = 175…
Bring the charm of the Greek islands into your home with this Santorini-inspired self-draining planter, a functional piece of décor designed specifically for modern plant lovers and 3D printing enthusiasts. Inspired by the iconic…
This is a remix of CeptoRider knife sheath that can be printed vertically with no supports and a wider brim for stability. Use standard 0.2 layer height.
![Palo Santo Incense Stand [r.2]](https://media.printables.com/media/prints/edc33b8f-d399-4e49-ac52-5c47836b719a/images/11701418_c0ef9225-8faf-41dc-93ef-3c2d1e321b50_c845132f-ca70-4dd5-8739-afd013bfac7f/20260111_140627-photoroom.png)
