37 models
I modeled this with dimensions taken from the official part. I have not used it for my install as I also modeled a custom version to exact fit my Kia Niro / JBL speakers. Update 3/14/23: I printed a piece to compare and my measurements…
A Anderson plug holder for SB175 (175A Grey Version) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: 3DPrintz PETG Black Category: Automotive
DCC-EX is a team of dedicated enthusiasts producing open source DCC & DC solutions for you to run your complete model railroad layout. Our easy to use, do-it-yourself, and free open source products run on off-the-shelf Arduino and our…
Greetings, A few months ago I began designing, building, and testing 3d printed speakers using the SB Acoustics SB15 and SB26 aluminum drivers. The tweeter on all three designs use the Somossonus (AKA Augerpro) waveguides, but with some…
Couldn't find a simple mount/housing for ELPs 16 Megapixel USB camera module, which can be mounted behind the bed, facing the front of my Voron 2.4. Made it especially for ELP-USB16MP01 “H110”(undistorted 110 degree lens, FOV is about 107…
7.75" x 3.25" Storage Bin Divider. Fits horizontally(side to side) across bin 8" wide X 4" high. Doesn't fit perfectly as it's flat on one side, but locks in place and does the job. 197mm x 79mm overall print size. Includes files for a…
Mount for an Anderson SB175 plug. Create infill at 100% in the region of the wire entrance if you think you need to drill out for larger wire opening Print Settings Printer Brand: Prusa Printer: I3 MK3S **Supports:** Yes Resolution: 0.2…
Designed to mount under the rear bumper of a truck. Need supports 2 3mm screws for hinge I used these springs https://www.amazon.com/gp/product/B005XQG90Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I use TPU for the boot. Print…
I designed this to use as many parts from the the Ender 3 as possible. (I did use one and a half) This printer uses twelve V-wheels (Four per carriage), a printed bed, and three motors for X, Y, and Z motion. It has roughly 135mm of…
Da der Junior unbedingt mit dem ASB1 fahren wollte, aber sich auf der letzten Fahrt zwei Dämpferteller verabschiedet hatten, mussten kurzfristig neue her. Ich habe sie in PETG mit 100% Infill gedruckt.
The picture of the two pink parts shows the difference between the original and this one. There may be different looking connectors out there but all of the SB175 series connectors should be the same regardless of colour.
9.75" x 3.25" Storage Bin Divider. Fits horizontally(side to side) across bin 10" wide X 4" high. Doesn't fit perfectly as it's flat on one side, but locks in place and does the job. 267mm x 79mm overall print size. Includes files for a…
Reducer for dust extraction for Extol ESB1010. This end cap ensures the removal of dust particles from the machine. It reduces the outlet from the machine base to a 30mm hole for a flexible hose that is connected to the extraction (e.g.…
ABSIMA ASB1BL SAND BUGGY Front or Rear Skid also fits for these cars: T2M Pirate Sniper DF-Models Dune Fighter BSD Racing Prime Desert Assault MODSTER DUNE RACER could also fit for Redcat Racing Blackout...? enjoy!
ABSIMA ASB1BL SAND BUGGY MidFront Skid also fits for these cars: T2M Pirate Sniper DF-Models Dune Fighter BSD Racing Prime Desert Assault MODSTER DUNE RACER could also fit for Redcat Racing Blackout...? enjoy!
Absima ASB1BL Wheel Hub with Pin (4) Buggy/Truggy Radmitnehmer 12mm (4) Buggy/Truggy Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1 Infill: 100% Category: R/C Vehicles
Diese Standfüße sind zur zusätzlichen Montage an der Soundbar DSB1000 der Marke Grundig gedacht. Die Standfüße haben eine Höhe von 2cm - 4cm - Material: PLA - 20% Fülldichte - Stützen beim druck
Mit diesem Adapter kann die SB19ST-C000-4 Kalotte an das SB Audience H225 angeschlossen werden. Diese Kombination verwendet Oli Eser in seiner "Lillith". With this adapter, the SB19ST-C000-4 dome tweeter can be connected to the SB…
I designed a shock tower guard for my Mugen MSB1 because the kit doesn't come with one, and the TLR option is a bit too bulky in my opinion. It fits the rear tower as well! It allows the shock cap to move completely freely and relies on a…
This is a closed mesh model of an Anderson SB175 connector with no openings or text that has been offset by 0.25mm. It can be used to create mounts for the SB175. Included is a photo of an example mount.
Speed Limiter for the RC on the Absima ASB1BL, so that my toddler can drive it too ;) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Doesnt Matter PLA Category: R/C…
Anderson SB120 Dust Boot Designed for 6 AWG Welding wire EDIT: Changed the length and added a plus/minus indication Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 5%…
Note: This model is not fully accurate, particularly in terms of measurements, until official specifications are publicly available. Category: 3D Printing
If you find my designs useful, please consider sending a tip Quick and dirty remix of Callidus80 's charger cradle to fit a TerraTek charger and TTSB18-2 18v 1300MAh battery. Print Settings: Quality: 0.2 Infill: 20% Brim: Yes (Personal…
35mm DIN rail bracket for the EX-CSB1 Has recess for M3 nuts/screws Sized for mounting the printable CSB1 case with tabs:
Sharp HT‑SB147 wall-mounted remote control holder
This is my first project, so any feedback or suggestions are greatly appreciated. It is a soundbar stand measuring 66 x 3 x 9 cm (Length x Height x Depth), specifically designed for the Sharp HT-SB107, but also compatible with any other…
This is basically just a blanking plate to fill in the gap around a Gotoh style 9v battery box (I think mine was a BB-02), when used to replace the standard battery box in a Sterling by Musicman SB14 bass. Note - there is some routing…
A speaker mount designed specifically for the Sony SS-TSB121, this Thingiverse creation allows for easy attachment to standard screw hooks. It incorporates a thoughtful design to ensure a secure fit for your speaker, significantly…
Da der Junior unbedingt mit dem ASB1 fahren wollte, aber sich auf der letzten Fahrt zwei Dämpferteller verabschiedet hatten, mussten kurzfristig neue her. Ich habe sie in PETG mit 100% Infill gedruckt.
DCC-EX is a team of dedicated enthusiasts producing open source DCC & DC solutions for you to run your complete model railroad layout. Our easy to use, do-it-yourself, and free open source products run on off-the-shelf Arduino and our…
35mm DIN rail bracket for the EX-CSB1 Has recess for M3 nuts/screws Sized for mounting the printable CSB1 case with tabs:
7.75" x 3.25" Storage Bin Divider. Fits horizontally(side to side) across bin 8" wide X 4" high. Doesn't fit perfectly as it's flat on one side, but locks in place and does the job. 197mm x 79mm overall print size. Includes files for a…
9.75" x 3.25" Storage Bin Divider. Fits horizontally(side to side) across bin 10" wide X 4" high. Doesn't fit perfectly as it's flat on one side, but locks in place and does the job. 267mm x 79mm overall print size. Includes files for a…
