Counting matching models…
Firt of all Check out the github repository https://github.com/Radiotbo3d/SBFI What is this? These are replacement front idlers for Vorons (and Voron-based machines). This design is available for Voron Trident and Voron 2.4. Improvements?…
With this case the camera can be easily mounted on the aluminium extrusion profile. You will need 4 m2.5 12mm screws for the case. You can use m3 8mm screws for mounting the camera to the bracket or use m3 12-15mm threaded studs and…
This modification is a kit and does not require you to mess around with the SBF blaster electronics. All components are mechanically fastened, therefore this modification is reversible. You may adjust the length of the m3 screws and the…
A handguard for the SBF by Gavinfuzzy. Attaches exactly the same way as the originial SBF handguard with no additional or custom parts. There's usable M-LOK slots on the 3 and 9 o'clock positions and regular picatinny at the top and…
Custom version of the ELP Camera Module Mount. https://www.thingiverse.com/thing:3133056 Ver2.5 Go Pro mount compatible version. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill:…
My edit of a Buttstock for Gavin's SBF! Uses the retractable rods from the SBL1 hardware for its stock. The stock goes through the slingpoint in the SBF on both sides, making this one of the most compact stocks out there! Just use GFZ…
ATEK handguard I made for Gavinfuzzy's SBF Nerf Blaster! It replaces the original handguard. Included are two options - window, and no window. The sides of the handguard also have holes that are Mlok spec to put on all your favorite…
Replaces the default SBF muzzle device with the Gryphon one.
This is a suppressor remix based off the Titanfall Smart Pistol Mk5 from FusedCreations, to fit on the SBF. It has several ports in it to allow air for flow though it, and it's oversized to keep the dart from coming in contact with the…
You'll need m3x10 screws to screw in the buttplate. Or you can just superglue it
Aftermarket carry handle handguard for the GFZ SBF-BP. Inspired by a prototype SBF-BP that Gavin made, I recreated its carry handle aesthetic with my own flair. Two versions of the handguard are available, one with integrated side MLOK…
Remixed front end for SBF that makes it noticeably worse.
If you bought some nice new Sanwa OSBF-30 buttons for your arcade stick, and figured a 1 1/4" drill bit is close enough to use on your wood box, you probably feel the pain I felt when I saw just how loose that fit was. The 2mm variance…
Print flat side down, no supports or brim necessary. If printing in TPU, make sure there's enough bottom layers for the screws to grab. I printed mine 15 bottom, 3 walls, and 3 top layers with 5% infil for good squish.
A handguard for the SBF by Gavinfuzzy. Attaches the same way as the originial SBF handguard with no additional or custom parts. There are usable M-LOK slots on the 3 and 9 o'clock positions and the lower 50° surfaces. Regular picatinny at…
An extended handguard for the SBF by Gavinfuzzy. The included extended muzzlepiece is required for mounting. There are usable M-LOK slots on the 3 and 9 o'clock positions. Regular picatinny at the top and bottom. In the back there's a…
Made more room for your finger on the trigger.
An extended handguard for the SBF by Gavinfuzzy. The included extended muzzlepiece is required for mounting. There are usable M-LOK slots on the 3 and 9 o'clock positions and the lower 50° surfaces. Regular picatinny at the top and…
Middle plate replacement for SBFI (Smooth Beefy Front Idlers) to mount a 415mm Makerbeam XL 1515 for Bondtech INDX. This is for a 350mm Voron 2.4, if you have a smaller one you could use these with a smaller length 1515. Based on the…
Print flat side down, no supports or brim necessary. If printing in TPU, make sure there's enough bottom layers for the screws to grab. I printed mine 15 bottom, 3 walls, and 3 top layers with 5% infil for good squish.
Remix of SBFI to use 6x2mm magnets instead of 6x3mm. With added 0.4mm chamfer on magnet holes to ease magnet insertion.
This is the beefy front idler body with the mounting tabs shortened to 25mm for my FT-5 Voron Build. If you want to see the rest of the project please check it out here: FolgerTech Ft-5 with Trident Gantry/belt Path - Build Diaries - Team…
