Counting matching models…
Scheppach BASA1 : https://www.amazon.de/gp/product/B00DOYWJZS/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=armin0f-21&creative=6742&linkCode=as2&creativeASIN=B00DOYWJZS&linkId=3e0c2a93048ce705431fb236b986f110 My Creality CR-10S :…
Hi, since I couldn't find bit holder for my new bought scheppach cordless drill I decided to design it myself.
this part plugs in the height adjustment handheel to prevent it from rotating and thus prevent unwanted sawblade decrease
I printed it using ASA filament. Mounting from corners using four small screws (or glue, if you wish).
Der oszillierende Banschleifer OSM 600 und vergleichbare Geräte werfen nach rechts Schleifstaub raus, der nicht direkt von einer starken Absaugung abgesaugt. Da oft das mitgelieferte Anschlag rechts nicht genutzt wird, damit mal auch…
This prints flawlessly with supports on the upper bow.
I baught a Multitool by Scheppach and build an Adapter to power the multitool using the Gomag Battery. Print with small layer height and Support. It needs two 1,5mm² cables with each 64mm long.
Secure connetion to the Click & Clean Hoses from Bosch, Hose going out to the backside
This guide rail base is designed for the Milwaukee M18 CCS55‑0 circular saw, enabling the saw to operate similarly to a plunge saw when paired with a Scheppach guide rail. The Scheppach rail is a cost‑effective alternative to other rail…
Scheppach Vacuum Connector (TS4000) Anschlussstück für eine Scheppach TS4000 Kreissäge an eine Absauganlage
This part replaces the Suction Port — part no. 14 in the user manual — of the Scheppach HD2P dust extraction system . Unlike the original clamp-on part, this version is secured with screws to provide a more stable and reliable fit. The…
A sturdy cordless drill holder for almost all cordless drills (Makita, Bosch, Einhell, DeWalt, Ryobi, Black&Decker, Worx, Scheppach and many more). This holder will take any drill chuck with 43 mm outer diameter and a maximum length of 70…
Scheppach DP18 Vario Bohrtischbefestigung Zum befestigen einer Holzplatte o.ä an der DP18 Vario. Installation: Prüfen ob die Grundkoerper durch die Langlöcher des Bohrtisches passen. Falls nein bitte die Kanten der Langlöcher mit einer…
TB150 HSW pliers mount Update: 21.07.2024 made the arms wider to fit the other pliers
What is a featherboard for a table saw? Essentially, it is a second pair of hands that provides better grip and accurate cuts . Fastened to the tabletop or fence a featherboard ensures that the wood is safely and effectively hold and fed…
Made this adapter for my Scheppach DC100 dust collector to connect shop vac hose. Fits standard shop vac hose. Printed in PETG with standard settings. 0.2mm layer height.
The older Scheppach Basa/HBS 32 vario band saw models had a square dust outlet. This adapter fits on this outlet and can be connected to the larger Festool hose (listed as D36). It can be printed without support using PETG or similar…
The older Scheppach Basa/HBS 32 vario band saw models had a square dust outlet. This adapter fits on this outlet and can be connected to the smaller Festool hose (listed as D27), which is also the normal hose supplied with Festool vacuum…
English The HBS 32 vario band saw from Scheppach has a round plastic table insert. This naturally wears out during normal operation. Fortunately, some spare parts are still available for this old machine from the early 1990s. Parts such…
Adapter, Absaugung Scheppach Band und Tellerschleifer auf Bosch Tischkreissäge Anschluss
Hi, since I couldn't find bit holder for my new bought scheppach cordless drill I decided to design it myself.
Cogged Rack For Scheppach HS100S Table Taw (Angle Adjustment) part number 108: media.pdf
Wir haben seit ca. Zwei Jahre sind diese Absauganlage her und sind eigentlich sehr zufrieden. Was stört, ist, dass die Späne und der Staub sofort vom Rohr in Richtung Saugmotor mit den Filtern fliegen. @Angeregt durch ein Video, wo ein…
The connector is quite expensive and you get only one connector. I wanted 2. Print 2 Printed in PETG, could any other filaments ( not tpu). Additionally you will need ( For 1 connector): 4 pieces of stainless steel rod 3mm diameter 137 mm…
this part plugs in the height adjustment handheel to prevent it from rotating and thus prevent unwanted sawblade decrease
My friend asked me to model and print a replacement throat plate for her Scheppach Prima HBS 32 Vario band saw, as it chopped up the original over the years. Printed on the Creality CR-10 in Colorfabb nGen. bandsaw lintzaag bandsäge…
Adapter connecting Kärcher MV2 with Scheppach BTS800.
Adapter to connect a HT Pipe DN 50 to Scheppach DC 100 (Parkside PASA 1200) or similar. Prints without support.
A flat mount option for the Scheppach 2-way air splitter I used to mount it to the side of my CNC table. Printed in PETG, no supports or special print settings needed. Stick in 2x M3 nuts through the back before mounting to allow the top…
Einfache Befestigung für einen Kunstoff Messschieber gekauft beim Großen A. Befestigung mit M4 Schrauben an der Spindel und am Messschieber, optional mit M4 Einschmelzmuttern ansonsten längere Schrauben. Der Messchieber selbst ist mit…
This is a T-nut for attaching things like featherboards to a Scheppach HF series table router (and similar models). You need an M6 screw to drive through and a matching nut. Consider printing a handle for the nut, there are plenty…
It was annoying that Scheppach didn't design one to begin with so here we go. Printed in PLA with 0.2 mm layer height on a Prusa Mk4. The support material was a bit tricky to get out but it's possible. You will have to cut a hole in the…
FreeCAD Made this replacement with FreeCAD. Feel free to use the freecad source file for other sizes. Most dimensions are varset based. The model has print in place dove tails and can be assembled without tools. collection: CAD exercise…
Guide rail holder for the Festool MFT system for the Scheppach guide rails, which should also work for the Festool rails. Used this construction for my Scheppach Battery Saw PL55Li are required additionally: 1x M8 HEX screw 80mm 1x M8 nut…
I printed it using ASA filament. Mounting from corners using four small screws (or glue, if you wish).
Replacement kerf insert for Scheppach HM90SL miter saw (Printed in PLA + ironing topmost surfaces)
Einfacher schneller Adapter um an einen DC100 von Scheppach, ein HT Rohr anzuschließen, da mich auf meinem YT Channel jemand danach fragte. Ich habe es anders gelöst, deshalb nicht gedruckt. Sollte aber passen. Ansonsten die Parameter in…
Router table insert plate for Scheppach HF50 Ø12mm, Ø22mm, Ø47mm Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20 Filament: any PLA - Category: Machine Tools
My friend broke the original handwheel for his SIP wood lathe and was distressed to discover from SIP that the part was unavailable. 3d printer to the rescue... I took measurements from the original wheel and made modifications to the…
Update 25Nov22 I've uploaded Version 3 of the zero clearance & 6mm Chamfered Slot inserts, which are stronger again than version 2, with more reinforcing ribs. I now print these in ASA, which seems more resilient than PETG or PLA and I've…
This Adapter screws in place of the original inlet with the original screws and without any other modifications necessary. It provides a decent cyclone effect to reduce clogging of the filter. Additionally it reduces the inlet to fit…
PETG 0.2 mm 70% fill without supports
Konstruovano pro Scheppach Compact 10 T 400 V, bude asi kompatibilni i pro jine vyrobce. Stavajici srouby jsem nepouzil. Nahradil jsem je " Šroub válcová hlava - inbus DIN 912 M5x60 nerez A2" + M5 samojistici matice. Tisk: vrchni stranou…
Tisk PETG, vrstva 0,2mm, výplň Gyroid 45%
zur Verbesserung der Absaugleistung habe ich das folgende Inlay kreiert
Das passt in den unteren Kragen vom Fass, ich habe die Füße noch mit Doppelklebeband am Boden befestigt und Filzplättchen drunter geklebt.
I used openscad to import the model and cut of some of the edge, made a new shape to fit it to my hose. It printed well without supports You can print the stl file, but if you want to modify it for a different type of hose, you will need…
To prevent the mount from breaking again, I increased the outer diameter to improve stability. Part list: spare part cylinder head screw M5x30 | quantity: 1 hexagon nut M5 | quantity: 1 Print instruction: material: PETG or similar…
An additional flap on the stop button increases safety when working with the saw. The axle is made of a 2.5 mm diameter blind rivet pin, cut to the appropriate length of 41 mm. After installation, the flap should fall freely. For axles…
Der oszillierende Banschleifer OSM 600 und vergleichbare Geräte werfen nach rechts Schleifstaub raus, der nicht direkt von einer starken Absaugung abgesaugt. Da oft das mitgelieferte Anschlag rechts nicht genutzt wird, damit mal auch…
Ein Absaugadapter gebogen fuer eine Scheppach Dekupiersaege von Innen 35,2 mm auf Aussen 40 mm.
eplacement compressor impeller/fan for Scheppach HC 24. Shaft diameter 17 mm, outer diameter 102 mm. Includes STL for printing and STEP for editing. Description This model is a replacement impeller / fan designed for the Scheppach HC 24…
This is a simple mount to attach a 250V 12A softstart modul KR-009 or the 16A ZLB to a Scheppach mitre saw HM90SL without making any permanent changes to the saw. Just unscrew one screw that holds the bladecover, add the mount and…
This adapter is a mix of the great adapter by Duc848 on Makerworld join with a male coupling for the camlock system.
This prints flawlessly with supports on the upper bow.
I baught a Multitool by Scheppach and build an Adapter to power the multitool using the Gomag Battery. Print with small layer height and Support. It needs two 1,5mm² cables with each 64mm long.
Secure connetion to the Click & Clean Hoses from Bosch, Hose going out to the backside
This guide rail base is designed for the Milwaukee M18 CCS55‑0 circular saw, enabling the saw to operate similarly to a plunge saw when paired with a Scheppach guide rail. The Scheppach rail is a cost‑effective alternative to other rail…
Scheppach Vacuum Connector (TS4000) Anschlussstück für eine Scheppach TS4000 Kreissäge an eine Absauganlage
The clamps that come with the Scheppach track saw rail are a threaded type and I thought these Quick Grip clamps would be more convenient. Believe that the Scheppach tracks are different to Festool and Makita. Assembly: Remove the…
Cover of the saw blade hole went missing. Made a new one. PLA, 50% infill. How I Designed This Just took a picture of the hole. Used it as decal. Then measured the diameter and scaled everything accordingly. I first made a prototy to to…
Hierbei handelt es sich um einen Absaugadapter für die Wippkreissäge Scheppach Wox D700. Der originale Adapter ist über die Jahre spröde und brüchig geworden. An ihn kann eine Absaugung mit 100mm Absaugschlauch direkt angeschlossen…
This part replaces the Suction Port — part no. 14 in the user manual — of the Scheppach HD2P dust extraction system . Unlike the original clamp-on part, this version is secured with screws to provide a more stable and reliable fit. The…
This optimized dust extraction nozzle for the Scheppach BTS900 focuses the full suction power directly on the sanding belt — exactly where most sanding dust is generated. The nozzle simply slides onto the original dust outlet and connects…
This dust collection adapter for the Scheppach BTS 900 and BTS 800 significantly improves dust extraction on the disc sander. The original dust port splits suction power between the belt sander and disc sander. With this adapter, the belt…
Hello, I made a remodelling of Scheppach Akku Halterung https://www.printables.com/model/445374-scheppach-akku-halterung-mgt410-scheppach-accuhold by redaeq. It is now compatible with the new 20V IXES series of Scheppach Accumulators. It…
Hello, I lost control while mowing steep downhill and the mower gained some speed and crashed. Luckly nothing happend, just the frontwheel broke. So I created just a simple replacement wheel with nearly the same outer diamentions as the…
Absaugstutzen für die Bandsäge Scheppach HBS261 zur seitlichen Absaugung. Anschluss Innendurchmesser: 35 mm - z.B. für einen Kärcher WP3 Staubsauger gedruckt mit Creality Ender 3 S1 Pro Slicer: Cura
Das Teil beseitigt ein grundsätzliches Problem dieses ansonsten perfekten Bandschleifers. Trotz eingeschalteter Absaugung werden bei weitem nicht alle Späne abgesaugt. Damit ist jetzt Schluss :-) Der Staubschutz wird einfach auf den…
osVAC Neo M32 adapter for Scheppach OSM600 Should fit any tool with 38,5mm outside diameter
Usage: This part serves as a replacement filter for the compressor. Before use, you need to install a piece of cloth or sponge inside.
Absaugadabter auf 35mm Scheppach BASA1 : https://amzn.to/2JsCbQE My Creality CR-10S : https://amzn.to/2VCkCiy My Creality Ender 3 : https://amzn.to/2WeIUDI Link for PLA : https://amzn.to/2EhJN44 Link for TPU : https://amzn.to/2Ek6ftt Link…
I needed an adapter to connect my Scheppach HBS261 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
I needed an adapter to connect my Scheppach BTS900 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
Customized version of https://www.thingiverse.com/thing:1246651 Instructions Using the following options: LargeEndMeasured = outside LargeEndDiameter = 57 LargeEndLength = 15 SmallEndMeasured = outside SmallEndDiameter = 38.5…
Simple hose adapter for my bandsaw Scheppach BASA1. Thanks, Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Doesn't Matter How I Designed This I designed this with Tinkercad and it was the first time that worked…
Scheppach cordless tools holder for wall. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 30 Filament: Gembird PLA Category: Tool Holders & Boxes
Printed with the following paramters: PLA 0.2mm layer height 4 Perimter Shells first 12mm solid to get a good grip on the nut This knob is for M8 bolts and can fit an ISO M8 nut (13mm wrench). The knob design origions from a knob…
The design uses M3 hardware. The m3 nuts are press fitted in the clips. There's some play in the body attachment hole to fix any misalignment. The caliper is placed so that it clears the transmission at the top of the drill and handle…
I´ve printed it with PETg and -0.15 Horizontal Expansion. Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0,2mm Infill: 40% Filament material: PETg
An elbow adapter/dust collector to plug a vacuum cleaner to the Scheppach belt/disc sander.
This is a Tormek LA-122 honing disc holder that fits instead of the normal honing wheel of the Scheppach 2000s. Parts has been oriented in the proper direction for printing. Only the outer part of the inner retaining ring for the big…
This is a adapter for the Bosch GTS 10XC and the Scheppach DC 500 sunction system. Printed in PLA
osVac adapter for Scheppach HMS850 jointer & thickness planer. Thanks to https://www.thingiverse.com/tokenizer for the great Fusion 360 files! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No…
osVac adapter for Scheppach HS105 table saw. 2022-01-28 Update: I have added the Fusion 360 files, but please note, I am a beginner in Fusion 360 and still learning ;) I am always open and thankful for tips and improvement suggestions or…
Adapter für den Abricht- Dickenhobel. Ich verwende diesen mit einem Festool 36mm Schlauch. Die Muffe ist ca. Ø45mm
Hi, Wochenende… Der Dickenhobel hatte ein bisschen zu kauen… Keine Zeit um auf das Ersatzteil zu warten (falls es dieses überhaupt noch gibt)…
I made this model for my new grinding machine, the Scheppach BTS 900. This adapter is good for the Scheppach BTS 900 or other tools who have a dust collector connector with an outer diameter of 61,8mm. The Vacuum cleaner should have an…
Inspired only by the fact that the delivery did not happen without damage to the shipment. The original has completely straight blades and just blows air around and doesn't cool the engine too much. This version is quick without…
Spring board for the Scheppach table saw. As a suggestion I took feather-board-fur-bosch-gts-635-216. Everything else is redrawn and created. 2x M5x30mm screws and 2x M5 nuts are required for assembly. The screw head/nut must have a width…
