15 models
I designed this Optical End Stop Switch mount & carriage flag to fit my 2020 delta printer. I also made a cover to fit over the switch to help prevent stray light affecting the sensor. The printer started as a FolgerTech Kossel, which I…
MGN12 carriages for SeeMeCNC's barbells. For each carriage you will need 4 McMaster M3 Heatserts https://www.mcmaster.com/94180a331 4 M3x16 Screws (Mount to MGN12H car) 2 M3x20 Screws (Barbell) 2 M3x12 Screws (Belt Retainers) 1 M3x12…
Update 11/2/23: SeeMeCNC Eris Kits are now shipping! Update 9/15/23: Github SeeMeCNC Eris Fork Repository The SeeMeCNC Eris , released in 2016, was a ready to print out of the box mini delta printer made with injection molded parts and…
This is a magnetic mounted z-probe using a mechanical end-stop switch. I am rebuilding my old MakerLibre 1515 Mini Kossel and upgrading it along the way. I decided to go with the SeeMeCNC ball-joint effector arms and their molded platform…
Filament Guide for your Ender 3 that has been updated to use SeeMeCNC EZR Struder . This guide was designed to work with your Mosaic Palette2 . It can also be used just fine without a Palette. You can print without support. Print Settings…
This is a model of the SeeMeCNC Orion delta 3D printer Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Category: 3D Printers
Tension release arm for the SeeMeCNC EZRStruder. Made this model because my stepper overheated and warped the original. Must be made from ABS or other higher temp material. Original part is injection molded ABS. Print Settings Printer:…
I Remixed this so i can use my Filament sensor on my CR10S with the SEEMECNC EZR STRUDER Category: 3D Printing
The stock Eris doesn't have very good part cooling, causing wobbly sidewalls, messy overhangs, and oozing. There's a single 30mm blower fan due to the tiny effector, so this upgrade pack improves hotend and print cooling for the SeeMeCNC…
This is a simple bracket to allow removable enclosure or draft shields to be installed on SeeMeCNC's BossDelta 300 printers. The frame is based on 1" x 2" aluminum extrusions, so it may be useful as-is for other printers as well. I am…
This is going to be a really niche fix for people who had this issue with their Eris, but a friend and client of my business has the brass bowden fitting break on one of his Eris machines. SeeMeCNC being unable (Or unwilling) to help…
Hey folks, Got bored in Inkscape today and made a badge for my Rostock in one of them there ole timey fonts. Scaled mine up a little bit, but the default size should fit on a Rostock Max body panel. Recommend being very gentle and use a…
I had to design a more compact adapter from the Rambo Mini mounting holes on the SeeMeCNC H2 for the Duet Wifi. Since I am going to running the stepper drivers with a little higher current to be safe I added a 40mm fan channeling under…
The Folgertech Kossel 2020 kit comes with a weak direct drive extruder with no adjustments. I designed this extruder mount to add a Steve's extruder to the 20x20 extrusion fame. The force is about 5 times stronger and the stepper motor…
I designed this Optical End Stop Switch mount & carriage flag to fit my 2020 delta printer. I also made a cover to fit over the switch to help prevent stray light affecting the sensor. The printer started as a FolgerTech Kossel, which I…
