Counting matching models…
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
Description: A small enclosure for a Senseair S8 CO2 sensor and a Wemos D1 Mini ESP board. No supports and no fasteners needed. Everything just slides into place. Tips: Make sure the wiring connects from the wifi-side on the D1, and the…
I remixed the original model, having split it into 3 parts for easier printing and assembling. You will need 8 heat set inserts and 8 m3x8 screws. Heat set inserts are to be inserted into the middle part on both sides. I used Wemos D1…
This is a simple enclosure for an ESPHome-based air quality sensor, consisting of: SenseAir S8-4B CO2 sensor (including a baseline calibration pushbutton) I used the -4B variant as that is what I could get at a good price from Aliexpress.…
This is a housing for the ESP32 board WT32-SC01 with 320x480px LCD and two sensors: - SEN5X (PM, VOC, Temp, Humidity, NOX) - all SEN53, 54 and SEN55 have the same form factor - SenseAir S8 (CO2) The back cover is holding the sensors in…
Remix of the DIYRUZ USB CO2 Zigbee sensor enclosure. It allows reprogramming while being in the enclosure due to a specially made hole at the bottom giving access to Dupont male pin headers soldered into the PCB. Also, the lid of the box…
Case for Inland FTDI and SenseAir S8. Basic case to hold Inland FTDI and SenseAirS8. Use 4 M3 x 6mm screws to hold the top on. STEP file included.
The diameter of my new mixer was not wide enough compared to the hole in my sink and I had trouble fixing it properly. So I modeled these 2 pieces that allowed me to fix it correctly.
A quickly designed replacement of the original wooden insert for a soap dish bought in Leroy Merlin - Sensea Scandi…
A simple enclosure for a Senseair S8-4B co2 concentration sensor and a wemos S2 board with the OLED shield. Also includes space for gluing in a 8mm WS2812b LED for indicating the CO2 levels with a nice color, a translucent filament is…
Ho ricreato la vite di fissaggio di una alzata per WC per anziani, visto che il ricambio non è disponibile. Stampato in ASA in orizzontale con supporto. I recreated the fixing screw for a toilet seat riser for the elderly, as the spare…
This is a case for the SenseAir S8 CO2 meter and ESP8266 NodeMCU, all the screw holes are compatible with M3 bolts. i tried to keep everthing reasonably compact, still leaving enough room to solder wires onto the ESP8266. I'm using this…
Piece de réparation pour les roulettes de la paroi de douche SENSEA ou ROYAL de PROFILTEK. Ainsi, votre frein de paroi refonctionnera à nouveau. Cette pièce est d'après LEROYMERLIN assez fragile et le devis salé ^^
Ho ricreato la vite e la staffa di fissaggio di una alzata per WC per anziani, visto che il ricambio non è disponibile. in alcune foto si vede il pezzo originale a sinistra. Stampato in ASA in orizzontale con supporti, ma sembra più…
Doigt d'activation pour frein amortisseur de paroi de douche sensea leroy merlin ou profiltek gamme royal coulissante.
