Counting matching models…
This is a simple holder for garden shears and similar tools. I would recommend printing it upside down for more contact surface with the bed. Otherwise it prints just fine without any supports. I printed mine in PETG but I guess PLA would…
Organize your pruning shears using the Ryobi Link storage system. Print recommendations: Layer Height: 0.30mm Supports: None Infill: 0% Perimeters: 3 Filament: OVERTURE Grass Green PETG.
Recommended printing in 100% infill, Variable layer heights. The teeth being finer layer heights, PETG or PLA has worked nicely for me, Ender 3, Prusa Mini & Mk3 can print without supports, but its better with. I work for the ambulance…
Holders have to be tilted slightly for the shears to be straight but can also be mounted on an angle. Whatever you like :)
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs Non-functional Trauma Scissors for Clinical Simulation Why would you need these? In clinical simulations, you’re…
Simple wall mount for my basic manual hedge shears (without gear). The lower part is not necessary to mount the hedge shears. It just protects the tip of the blade (or better: it protects humans or animals from getting hurt by the tip of…
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ yellow…
This is a remix of Cbonk90's Ultimate Stethoscope Holder with only the stethoscope and trauma shears slots intact. Many medical specialties do not require tape as often as the ER environment might - so a version without the tape holder…
The model fits the short and long blade. Only tested with the old turquoise model. I would recommend printing it with a brim for better bed adhesion. OnShape Model
I am a nursing student. I quickly learned that it is very easy for your trauma shears to fly out of your pocket whenever you have to run to a code etc. This causes you to have to run while holding your thigh pocket which is an awkward…
This simple tool is easy to print and is used to attach your pruning shares to a broomstick. you will need to add some wire and two 4 mm pins. To attach the pieces together use duct tape on one and six 3mm screws at 12mm length on the…
For use with Fiskars Pruning Shears (P121) . May fit others, but I have not tested any. I left the back of this model empty & clear to allow you to use your preferred mounting method. I am using this holder with a Gladiator…
Needed a place to put my Cutco shears as they were always a pain to find.
A holster for Gardenite Ratchet Anvil Pruning Shears . I'm not comfortable sticking the shears in a pocket, but I need to keep them close when I'm doing yard work, so I made this. 10/29/19: I added a newer version that is much slimmer. I…
Replacement clip (the white clip in the pictures) for an older model Fiskars RazorEdge Micro-Tip Easy Action Shears. It's a customizer so if it doesn't fit yours you can adjust it. V2: Version 2. – Version one lost its grip over time, so…
This is a custom designed wall mount for the Fiskars 23 Inch PowerGear Hedge Shears. There are many models of Fiskars products so please see the photo to ensure you have the right one for use with this wall mount. Included are the source…
We picked up the Shun DM7300 kitchen shears as they were highly recommended by the folks of Cook's Illustrated/Americas' Test Kitchen. Since we are going to keep them in a drawer, it seemed like a good idea to have something to protect…
I created a handle for the FloraBest garden battery shears type FAHS 40-Li A1. Printed with PLA filament and holds up great. I recommend printing the mat as well, because of less pressure on the hooks.
this item is for use with the #GridFinity system by Zach Freedman: https://www.youtube.com/watch?v=ra_9zU-mnl8 used to hold Klein electrician shears, 1 x 1 tile, best used with a weighted baseplate.
The locking tab on my Corona Pro Cut shears broke and it will not lock closed. Designed this as close as I can to the original, but beefed up the weak spots. I'm including a second .stl with an extended tab so I can pinch it to open…
Elevate your barber station with this ultra-clean, minimalist, and high-functioning Premium Barber Organizer Set. Designed from the ground up to eliminate countertop clutter, this two-piece set brings textbook symmetry and premium…
Assembly The 3mf file model is shrunk to 80% If you intend to shrink the model, ensure that the handle of the shears don't break off, due to it being very thin.
The Cuda Fishing Shears are inexpensive and great quality. They are just a bit too sharp and point to throw around in a bag. I designed this sheath to be a snug fit and to be made out of TPU. Requires no support, print straight up and down.
Remix of an excellent design. You should always store the shears when completely dry but just in case I added hexagon holes along the sides and a single hole on the bottom. That way, any excess moisture has a chance to evaporate. Print…
Replacement for a lost lock part for my cheap no-name pruning shears. Version 2 works better than the original design. Optionally it can be secured with a small wire (diameter: 1mm). Just cut a paperclip and push it in the small hole. See…
Print with alignment guide on the top, I used tree supports and printed in ABS with 3 walls. I used M2.5 x 16mm, pretty sure M3 would work too.
Good fix for my fave scissors. M5 nut needed. 1-2-24 Long overdue update: added customizer parameters to the Open SCAD script and generated an STL for M3 based screw, nut, and washer(s). This makes the retainer stronger and can thus be…
Turn your mitre/miter shears into a pipe cutter! Looks like it will fit the LÖWE brand but i'm not sure since mine are of a nameless brand, design looks to be the same. 5/8" (16mm) & 3/4" (19mm)
Another questionable use of time and filament to organize a single tool which takes up more space than it should but nests nicely with ym other scissors Gridfinity bin, so that's why it's a full 5x5. I made use of the empty space with…
the shear is old but still works fine - the locking mechanism broke and my mum wouldnt like to throw them away. My first attempt was to fully print it with the cylinder but it was to weak. I decided to use a m3 bold idk. the exact length…
Here is an easy way to keep track of your hammers on your pegboard. It can also be used to hold closed-end wrenches and hand shears with an eyelet. The two fingers press fit into the receptacles. I found that tree supports worked well and…
Gardena Pruning Shears Belt Holster A holster for carrying your Gardena pruning shears safely and within easy reach on your belt. Attach the holster to your belt using the built-in belt clip, then slide your shears in for quick access…
garden shears fixing hook Screw the M3 screw into the hook. Make some effort. No nut required. Compatibility: garden shears Mounting components: M3 screws Category: Outdoor & Garden
CZ: Držák plotových nůžek IKRA HTMN 520
A friend had a pair of scissors that she really liked, and they broke. I made this to fix them. I added a bit of lithium spray grease before assembling, which doesn't appear to have had any effect on the PLA. Edit: I made this nearly a…
rollers for a metal cutting saw were printed on ender 3 plastic PETG
A friend uses shears like these (much less rusty than these :) ) to cut cable marker tags when he does electrician work, but he sometimes has difficulty with cutting all of them the exact same length. So I designed this magnetically…
Filament : Devil Design. Ocean Blue. ( 100% makita blue. ) PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : 90c. Support : None.
My Wiss M3 shears hook deformed almost immediately and couldn't keep the shears closed. Unlike the original, this replacement hook can be easily opened or closed with your thumb, for single-handed operation.
After a while the bumpers on the Grüntek X-25 professional branch cutters got loose and one was lost in the grass. So I took the one that was left and recreated the model. Considering the outdoor usage and the impact it should handle, I…
Rack to hold wide pliers-like tools on edge (angled 60 degrees) to save space but accommodate shallow drawers. The tools pictured reach up to 3 inches from the bottom of the rack, so they fit in a 4 inch drawer with no interference. Three…
The original button is easily broken and the scissors could be fall into two pieces. Figmint Stainless Steel Kitchen Shears is available from Target.…
I used to work on a loading dock where we had to use metal or plastic seals on tractor trailer doors to show that they had not been opened between stops. I had to carry heavy duty shears to cut them when we received a trailer with one on…
the handle of my fisherman's pruning shears broke, so a new one had to be made.
Knipex Electrician's Shears 95 05 155 Gridfinity bin 3x5
This is one of the most useful things I have ever printed. A wall hanger for two pairs or kitchen shears or scissors. I used command strips to stick mine to the inside of the cupboard door.
WARNING - Use at your own risk, this will disengage safety trigger during use. Keep hands well clear of cutters. Always remove battery and shoe when tool is not in use! This is a TPU shoe that eliminates the need to squeeze both the…
Useful if you have to bring these scissors around without poking other stuff in your bag. I originally designed this with a magnet to prevent it from sliding off, but its not really necessary. This is intended to be printed vertically to…
Element of the switch of the combustion engine Tanaka THT210S
I broke the seatbelt cutter on my Leatherman Raptors (using it for something other than cutting seatbelts lol). I didn't like having random sharp metal on my shears so I threw this together quick as a replacement. No one else had made one…
Replacement latch for a Löwe latch used to lock the hand scissors when closed. 3MF File: Slowed printing with 50% cross hatch infill, printed with PETG
I made this to protect my beloved KAI N5240 sewing shears - every sewist/seamstress knows the pain of bumping something into your beloved shears, or hearing them scrape against anything in the drawer. This quick and easy print solves this…
I have designed a new Milwaukee battery mount for the Panthem loppers/pruning shears, since the original mount had a lot of play and the battery wobbled significantly. This is the Shear:…
This part can replace the locking lever on your Fiskars pruning shears if your piece breaks, like mine did, or if it just doesn't work terribly well (as they sometimes don't). Specifically the Fiskars model 398402-1004 Recommend printing…
Do not auto-orient this model onto its sloped end. I tried that and it did not print nicely. No supports or brim needed. === Keep your kitchen shears accessible with a compact wall-mounted holder! The open diamond lattice reduces material…
I have designed a new Milwaukee battery mount for the Panthem loppers/pruning shears, since the original mount had a lot of play and the battery wobbled significantly. This is the Shear:…
Knipex Electrician's Shears 95 05 155 Gridfinity bin 3x5
Turn your mitre/miter shears into a pipe cutter! Looks like it will fit the LÖWE brand but i'm not sure since mine are of a nameless brand, design looks to be the same. 5/8" (16mm) & 3/4" (19mm)
