26 models
UPDATE 04/23/2020: Added an updated version that extends the hex hole as requested in comments. New part is "Squirt_Hero8_Mount.Prop_Nut_Version.stl" Minimalistic GoPro Hero8 Mount for the Shendrones Squirt Printed in Sainsmart TPU and…
Original terraplane ducts are molded but i tend to break them regularly. So i decided to model this almost 1:1 copy of it. Printed it in LW-PLA - its too brittle (yellow one), but then i used Prusa PETG and it works just fine. (cant find…
Universal GoPro Mount Shendrones Squirt Slammed. Visit 3dprintsfpv.co.uk if you want any parts printed.
If you like the design please support my work. Even a small tip of 1$ helps. Thank you. paypal.me/GuyWithDrones Body print for Shendrones Thicc drone ver 2.1 frame to protect electronics from the dust etc. Made to hold crossfire antenna…
ELRS Antenna holder for ShenDrones Squirt V2. Holds an antenna from a Happymodel EP1, can be used with two zip ties to secure but is very snug so doesn't really need the zip tie. Printed with TPU with NO SUPPORTS at 35% infill. Print…
Made to house a 4mm antenna tube, Radiomaster ELRS antenna, and the HGLRC tuning adapter usb extension. https://www.hglrc.com/products/hglrc-tuning-adapter-usb-transfer-extension-cable-module-for-flight-controller
The GepRC Naked GoPro has a much smaller mounting tab that is not compatible with the usual GoPro style mounts. This part fits in place of Shen's 3D printed GoPro mount to solve that problem. I used GepRC's included thumbscrew as a heat…
Print in TPU and enjoy!
These short landing gear mount under each motor and provide enough clearance for a TeraRanger EVO LIDAR. They are quick and easy to print with no support required. I used PETG.
UPDATED 11/30/19 - Improved USB-C Dust Cover alignment Added an integrated USB-C Dust Cover to the Shendrones Squirt DJI FPV Holder.
This is a remix of the original design, printed with no supports in PETG
This stalk mounts opposite the VTX antenna and is sized for the Matek M8Q-5883 GPS/Compass module. It is hollow so that wires can pass through. I used 3M mounting tape to affix the module on top. Printed without support in PETG. The v2…
I wanted to put a HDZero Freestyle V2 VTX Kit into my Shendrones Squirt V2. This is the result. You can still easily access the firmware upgrade port as it will be on the top. I am using slimmer slammed 76mm ducts so not sure if this will…
Warning: This is a very old model I created in 2016 and imported from my Thingyverse profile ( https://www.thingiverse.com/TheZerschmetterling ). Maybe some links are broken or not up to date. If you have any questions do not hesistate to…
Warning: This is a very old model I created in 2016 and imported from my Thingyverse profile ( https://www.thingiverse.com/TheZerschmetterling ). Maybe some links are broken or not up to date. If you have any questions do not hesistate to…
Camera fits in through the back. I tried alternative solutions to fit it inside, but unfortunately due to the protrusions of the camera lens it made this the only practical way for full reliable protection. Us FPV'ers do not need more…
Here is my take on an easy to print simple camera mount for all 19mm cameras. Protection should be sufficient for most small cameras. Should be printed with a flexible filament such as TPU. Here I used a gyroid infill at 15% with a brim…
Warning: This is a very old model I created in 2016 and imported from my Thingyverse profile ( https://www.thingiverse.com/TheZerschmetterling ). Maybe some links are broken or not up to date. If you have any questions do not hesistate to…
Sastekwads.be is a Belgian webshop specialized in drones and related products and services. For more information about their offering and services, visit their website: Sastekwads.be.
Shendrones Squirt GoPro Mount Reinforcement Plate Print in PLA or other HARD plastic. Will need longer screws. Category: R/C Vehicles
Thi is a cover to hide the electronic for the Krieger from Shendrones. it simply "clips" to the green standoff. You can remove it for easy access of the electronics. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20-100%…
This is work in progress, I need to add add more material at the bottom of the mount. It is right now for the HERO3/HERO3+ but it can take the HERO4. it simply "clips" to the green standoff. You can remove it super easy when you don't fly…
I found the plate to mount the camera on the Krieger and Kriegerpus frames to be inadequate. So I made a means of containing the camera and using the same mounting holes the plate uses instead of holding the camera to the plate with…
DJI O3 and O4 bracket for shendrones sic
I created a Crossfire T antenna holder for my Shendrone Terraplane. The top version is made for placing it over the antenna holder. I also made the bottom version, if you want to place it below the antenna (e.g. for flying without the…
