Counting matching models…
I designed a base to build a hookah out of a Jack Daniels 0.7l bottle. I've tried and smoked with it and it works just fine. So if you are not able to bring a whole hookah or want a little one for yourself this is the right thing for you.…
Just print out both parts. Due to the modeled thread you can connect the two parts. If needed use a little rubber to get everything sealed. Put on a hose, and a tobacco bowl with coconut coal on top of it and start smoking. Be aware to…
Here I have created a shisha mouthpiece stand in which you can place up to four mouthpieces.
Um eine Ice Bazooka an einer Skadis Lochplatte zu befestigen. To attach an Ice Bazooka to a Skadis perforated plate.
Halter für (Omno) HMD auf einer Skadis Lochplatte Holder for (Omno) HMD on Skadis
Drak nasaditelný místo ventilu. Po profouknutí chrlí kouř. Použil jsem to konkrétně pro Sahara smoke - Nemesis, kde jsem musel dokoupit druhý adaptér s kuličkou do srdce dýmky. Jinak by to nefungovalo jak má. Dragon can be used instead of…
Here I have created a shisha mouthpiece stand in which you can place up to eight mouthpieces.
This hookah hose holder is designed for 4 hoses including connectors.
Naústek na vodní dýmku s motivem One Piece- Shisha mouthpiece
clip on is 21mm, but also you can use a cable tie for a more secure fit. (cable tie is 2 x 140mm) hose holder hole is 20mm - If you enjoy my 3D models and want to support my work, feel free to donate via PayPal . Every contribution helps…
This one was made as a joke for friend. :-D Print Settings Supports: No Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant You can use it like this but with printed mouth tip is…
Smoke the wisdom. Print Settings Rafts: Doesn't Matter Supports: Yes Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example,…
GoT Drogon head shisha mouth tip Print Settings Supports: Yes Resolution: 0.15mm Infill: 15% Post-Printing ============= You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in…
GoT Night king shisha mouth tip Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in fact it's just a piece of the classic hookah hose,…
Yoda head as shisha mouth tip Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in fact it's just a piece of the classic hookah hose, so…
Joker shisha mouth tip Print Settings Supports: Yes Resolution: 0.15mm Infill: 15% Post-Printing intended use intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for…
All you need is a PET bottle, a bowl and a hose.
Ich habe es mit meinem Alten Creality Ender 3 v1 gedruckt. Es braucht keine Supports und sollte mit einer Geringen Füllung gedruckt werden.
Transportables und kleines Mundstück zum Shisharauchen. Optimal um es mit in die Shisha-Bar zu nehmen. Am besten aus PETG drucken.
Verlängerung bzw. Adapter für Shisha-Schläuche Zwei Schläuche können einfach verlängert werden.
The project is not yet complete, but feedback is welcome. THE STL IS ONLY PREVIEW, PLEASE USE THE STEP FILES To assemble the hookah, refer to the product image. Everything needs to be printed once - Some parts come in different sizes…
This rack fits 8 bowls, whether phunnel or other types of bowls. Printed on a 30x30 cm print bed.
Einfach die Aufnahme (Wird 6x benötigt) in den Ständer drücken, Köpfe drauf und fertig.
Mit diesem speziell entwickelten Shisha Siebhalter kannst du deine Shisha Siebe ordentlich und sicher aufbewahren. Kein lästiges Suchen oder unordentliches Stapeln mehr – dieser Halter sorgt dafür, dass deine Siebe stets griffbereit und…
Here I have created a shisha mouthpiece stand in which you can place up to four mouthpieces.
This is a custom-made 3D printed add-on kit designed to enhance portability and organization for a Kaya Shisha hookah set stored in its original carry case. What's included in the design: Charcoal box: Designed to fit a standard TOM COCO…
Um eine Ice Bazooka an einer Skadis Lochplatte zu befestigen. To attach an Ice Bazooka to a Skadis perforated plate.
Halter für (Omno) HMD auf einer Skadis Lochplatte Holder for (Omno) HMD on Skadis
Hier ein Shisha Diffuser für ein Rohrdurchmesser von 16mm. Gedruckt mit PLAHier ein Shisha Diffuser für ein Rohrdurchmesser von 16mm. Gedruckt mit PLA
Here is a Shisha Tong's holder for 4 Tong's for the Skadis Plate. Hier einen Shisha Zangen Halter für 4 Zangen um es an einer Skadisplatte auf zu hängen
Um Shisha Mundstücke an einer Skadis Platte auf zu hängen bietet dieser Halter Platz für bis zu 8 Mundstücken.
Put Magnets in while printing.. No need to Stop the print. This Box is suitable for these forks (~1€ a piece): Aliexpress Shisha Forks The Magnets i used (5 x 1mm) : [Amazon Neodym 100 pieces Ø5mm] (…
Drak nasaditelný místo ventilu. Po profouknutí chrlí kouř. Použil jsem to konkrétně pro Sahara smoke - Nemesis, kde jsem musel dokoupit druhý adaptér s kuličkou do srdce dýmky. Jinak by to nefungovalo jak má. Dragon can be used instead of…
Here I have created a shisha mouthpiece stand in which you can place up to eight mouthpieces.
This hookah hose holder is designed for 4 hoses including connectors.
Sorgt für festen Sitz und Stabilität während der Fahrt. Die Emotion Roam wird mit einem XKAH Pro genutzt. Die Halterung fixiert nur die Shisha selbst. Für den sicheren und festen halt des Hitzemanagement, auf der Shisha, muss gesorgt…
Naústek na vodní dýmku s motivem One Piece- Shisha mouthpiece
A simple hookah hose holder designed to keep your hose secure and off the ground. The requires no tools and attaches directly to the stem. Compact, stable, and easy to print. Main hole: 16mm, mouthpiece hole: 13mm
Adapter Molassefänger M16x1.25 zu 3° Konus (Schliff 18,8) Adapter Mollasses catcher M16x1.25 to 3° taper (18.8 cut)
clip on is 21mm, but also you can use a cable tie for a more secure fit. (cable tie is 2 x 140mm) hose holder hole is 20mm - If you enjoy my 3D models and want to support my work, feel free to donate via PayPal . Every contribution helps…
Der Stopfen verhindert, dass Tabak in das Phunnelloch fällt, und so die Möbel beschmutzt werden.
While Cleaining the Water pipe of my Shisha Broke and it still had a thread inside the base and i could not get it out so i designed one on my Own
Replacement for a Shisha Waterpipe works fine with the Shisha Base i Designed/ print at 95% Scale
Custom replacement for resin part on Mr Shisha Rocket 2.0
This plate holds upt to 9 funnels. 5funnels will be pin Supported. I recommend a 0.6nozzle and 0.3 lh
This will make your hookah more quiet. Story: https://www.tiktok.com/@thomaskekeisen/video/6831482091813784838
Shisha Schlauch Zu macher. Damit kein Staub mehr in die Schläuche gelangen kann.
Shisha Gewinde-Adapter M12x1 auf M16x1 Ein praktischer Adapter, um ältere Shishas mit M12x1 Gewinde bei den Schlauchanschlüssen auf den neueren M16x1 Standard umzurüsten. Damit können auch moderne Schläuche und Adapter an einer älteren…
A normal Hokkah mouthpiece. Already printed and Tested it. Be aware to print with a suitable filament. If you are printing it with PLA be aware that it can dent in hot summer days under the sun. Have fun :)
Do you need new shisha moutpeace and like anime Overlord then this is something for you.
Es handelt sich bei diesem Modell um ein Ersatzteil für die Base einer Amy Deluxe Shisha. Das Teil ist bei mir aufgrund von Abreibungen nicht mehr optimal nutzbar gewesen, weshalb ich einen Ersatz gedruckt habe. This model is a…
A holder suitable for e.g. Seat Cupra drink holder for two e-shishas
hookah shisha coal box for 26mm coal cubes. handle is a 18/8 mount to hold the head during preparation.
i glued the pieces together. The ball needs to be loose between the upper and under piece.
Just a simple base to drop the vape pen and keep it vertical. Scaled to 102% on X and Y could be used as cap with enough friction to not get loose in transport. Brand El Shisha, product line Diamond.
Das ist eine Halterung Für eure Shisha Köpfe die ihr dann zum Beispiel an die Wand hängen könnt!
Maße Tischplatte: 18,35mm Shischa schlauch: 14,40mm dick Gewinde Metrisches ISO: M10x1.5 H6 /R
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
A stand that mounts easily and seamlessly onto your hookah. It is designed to hold 4 of your hookah tools. It comes in 2 pieces, the actual hanger, and a ring. Both pieces have places inside for 8 magnets each to be inserted. this way…
Dimensions Inner diameter: 20mm Outer diameter: 25mm Hole diameter: 3.5mm Print Settings Printer: Creation Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.1 - 0.2 Infill: 10 - 20% Post-Printing coming soon. Category: Replacement…
Jar Jar Binks shisha mouth tip Print Settings Supports: Yes Post-Printing You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in fact it's just a piece of the classic hookah hose,…
Smoke in rhythm Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example,…
This one was made as a joke for friend. :-D Print Settings Supports: No Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant You can use it like this but with printed mouth tip is…
Smoke the wisdom. Print Settings Rafts: Doesn't Matter Supports: Yes Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example,…
GoT Drogon head shisha mouth tip Print Settings Supports: Yes Resolution: 0.15mm Infill: 15% Post-Printing ============= You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in…
GoT Night king shisha mouth tip Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in fact it's just a piece of the classic hookah hose,…
Yoda head as shisha mouth tip Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in fact it's just a piece of the classic hookah hose, so…
Joker shisha mouth tip Print Settings Supports: Yes Resolution: 0.15mm Infill: 15% Post-Printing intended use intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for…
Easy to use holder for your hose. Just slide it onto your table, fit in your hookah hose and enjoy smoking your hookah while having both hands free. This model was made for my desk and your desk may have different width and/or your hose…
Boquilla para cachimba con forma del Pokemon "Koffing". Koffing expulsa humo por sus orificios. El .stl tiene incluido un anillo para colgarte la boquilla en un lanyard. Altura de capa: 0.2 Relleno: 15% Número contornos: 3
Eine einfache Halterung um den Shisha-Schlauch an seinem Platz zu halten. Öffnungen für 2 Mündstücke (20mm und 30mm). Einfach den Kohleteller abschrauben, den Halter darunter und wieder daraufschrauben. Fertig :) Print Settings Printer…
