Counting matching models…
This is a mount so I could easily fit a Cardo Spirit HD intercom to my Shoei GT Air II motorcycle helmet using the SRL2 standard fitting system. Shoei helmets are built to take their own intercom system but it's very expensive and I…
Adhesive chin mount for your SHOEI GT-AIR 3 helmet. You'll need Double Sided Foam Adhesive Tape to attach it to the helmet, 1 or 2 mm thichness. Printer: SOVOL SV-06 Plus + klipper Filament: PLA+ Slicer: Prusa Slicer Printer settings:…
I own a SHOEI GT AIR II motorcycle helmet ( I love this helmet ), and was frustrated with not being able to easily mount other communication devices due to the SRL2 mounting points take up room on the helmet rim. I decided to see if I…
Works with standard GoPro mounts and should be attached with 3M VHB tape. Included is a provision for a safety wire to be tied into the removable snout of the helmet. Printed with 100% infill and 2 perimeters. ABS print file with custom…
easy print, hidden screws, countersunk head wood screw ø4,5mm.
Made to be used with Tesa Sugru. Best printed in ASA or PC. PETG will also work, but might crack under heavier loads / faster speeds
I wasn't happy with the options available for a chin bar mounted gopro mount, so I made my own. Modeled in Maya and Meshroom, using photogrammetry to scan a model of my helmet's chin bar. For me, it printed perfectly the first time, with…
My roommate has the same helmet as me, but a different GoPro. The small session GoPro can easily be side mounted without catching too much wind, and with this mount, my roommate is still able to open the chin guard whilst filming. A…
This thing clicks into left slot for Shoei's Sena communication device and provides prongs for Cardo Packtalk mount to be slid on. Additional model - Shoei Neotec 3 adapter.stl - is just helmet part(cover) so you can remix it to add your…
Mount for cardo edge to mount it on Shoei gen.3 helmets. Difference from Packtalk Bold version - two teeth that hold the adapter additionally. Fits quite tight. You might need to file teeths a bit for easier fit. First attach this adapter…
I'm not sure how well it will hold up yet, so I suggest using a tether from your chinstrap to the camera. The idea behind this bracket was that I wanted to have a streamlined mount that did not look bolted on to the side of the helmet, or…
Mashup of two existing models (basically just bashed them together). i know there is another model but that's a paid one, and i didn't like to pay, so feel free to share. printed it in PETG, 0.2 Layerheight , with supports. if you do want…
Designed this because one of my Pin Lock pins broke on first use and they don't seem to sell them separately for the RF-1400 helmet. The ones I could find were expensive and no clue if they would fit. I printed at the highest resolution…
This is small adapter mounted on boom microphone arm instead of original Cardo molded plastic to use dedicated space (for SRL3 mic) inside Shoei Neotec 2 or Shoei Neotec3 helmets. Conversion of Cardo boom microphone to Sena SRL2/SRL3…
Remix du STL pour le montage d'un Packtalk Bold sur l'emplacement d'origine du Shoei GT AIR II. Imprimé avec support en ABS. Ce print permet le montage d'un intercom Cardo Packtalck Bold sur l'emplacement prévu d'origine sur la casque…
You just need to plug it into the lower small air vent of your SHOEI helmet (all newer versions seem to have the same front and air vents. As shown i jused the SHOEI TC-10. For easy removal you just need to press the sides close to the…
**FIXED Shoei NXR2/RF-1400 GoPro Chin Mount by Masway1400 on Thingiverse: https://www.thingiverse.com/thing:6272613 Summary: Fixed the gap between the rails and the body of the mount so that it prints like a continuous body.When slicing…
This is Comfort Pad Layer for the Neotec II from Shoei. Printed on my Prusa XL with no Buttom and no Top with TPU. Infill 15-30% Gyroid. Dies ist ein Wangenpolster (R&L) für einen Neotec II von Shoei. Ich habe sie auf meinem Prusa Xl ohne…
Required materials/tools: Small Phillips screwdriver for helmet disassembly Standard M6 nut ≥ 10mm M6 bolt Safety wire & 3M VHB tape OR epoxy Printing tips: ABS, PA, PA-CF/GF recommended Fuzzy skin optional, but it provides better…
Previous one i found had my camera tilted down too far. so i added a 3 degree and 5 degree angle increase versions. You can flip the old version to get a better angle but then the chin vent wont open properly/at all. I also flattened the…
I was really disappointed by the Sena SRL2 Speakers that fits in my Shoei GT-AIR 2 helmet. The only way to hear anything through them was with Audio Boost on which in turn made the audio distort. so I took some 50mm speakers of my old…
Shoei Gen3 GoPro Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3 https://www.printables.com/model/1832676-shoei-vertical-mount-for-gopro-adapter-helmet-gen…
A holder that clicks into Shoei Neotec 3's speaker holder and into which Koss Porta Pro speaker can click into and svivel in it a bit. Two versions - one puts speaker in center related to speaker hole, other is offset about 2 cm from…
Shoei Gen3 GoPro vertical Clip-Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3…
Used an iphone to scan my Shoei GT Air 3 helmet and make a surface I used to cut the original model. It fits nicely on the helmet and lines up well with the wires.
I made this to hold my hair in my helmet. It secures in between the pads and the helmet and then you can tuck your hair into the cloth section. You need a stretchy cloth, and an elastic band. 3D print the clip Heat it with a hair dryer…
OK, so after increasing the angle by 3° and then 5°, it was apparent that some people might still need MOAR! so I did 8° and i tightened up the clasp area for the slide in gopro mount so it would not rattle at all. use some 3M VHB tape…
Shoei Gen3 GoPro horizontal Clip-Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3 Vertical Version:…
I was really disappointed by the Sena SRL2 Speakers that fits in my Shoei GT-AIR 2 helmet. The only way to hear anything through them was with Audio Boost on which in turn made the audio distort. so I took some 50mm speakers of my old…
Used an iphone to scan my Shoei GT Air 3 helmet and make a surface I used to cut the original model. It fits nicely on the helmet and lines up well with the wires.
I have not taken any photos yet, however i found that the thread was perfect and the plastic shroud was decent enough to do the job and wasnt worth any more time to perfect.
Cardo Packtalk Edge mount for Shoei helmets compatible with SRL-2 Recommended settings: 4+ walls, infill - yes ;) , layer 0.2mm, brim 5mm+, supports: Yes, only on the table + forced support in place shown in one of pictures. Recommended…
Cardo Packtalk / Packtalk Bold mount for Shoei helmets compatible with SRL-2 Recommended settings: 4+ walls, infill - yes ;) , layer 0.2mm, brim 5mm+, supports: Yes, only on the table + forced support in place shown in one of pictures.…
Sena 50R mount for Shoei helmets compatible with SRL-3 Recommended settings: 4+ walls, infill - yes ;) , layer 0.2mm Recommended material: PC, PC+CF. Note - PETG is too flexible. Shoei mount does not provide very good lock as previous…
Cardo Packtalk Edge mount for Shoei helmets compatible with SRL-3 Recommended settings: 4+ walls, infill - yes ;) , layer 0.2mm Recommended material: PC, PC+CF. Note - PETG is too flexible. Shoei mount does not provide very good lock as…
Cardo Packtalk Bold mount for Shoei helmets compatible with SRL-3 Recommended settings: 4+ walls, infill - yes ;) , layer 0.2mm Recommended material: PC, PC+CF. Note - PETG is too flexible. Shoei mount does not provide very good lock as…
