Counting matching models…
This is an GoPro compatible action cam adapter for the Petzl Sirocco climbing helmet. It is intended to be taped to the helmet with a double sided outdoor tape like known from the original GoPro or action cam mounts. The two holes face…
AC Milan, San siro 3D Photo Due to the size, it is necessary to scale or separate into several parts (as in the picture). My recommendation is to glue it on glass and use a frame with minimum dimensions of 30x21cm.
For better overvview of the milling blocks in our stock I created this tray so we can present and find the blocks we use faster. I printed it with the following settings and it worked great: 3 Shells thickness (top/bottom/sides) 3% Infill
A case to house an SDC30 Sensiron CO2 Sensor.
the recommended pole diameter is 5cm. tip 1: if the pole mount doesn't fit easily, sand the outside of the pole down with some rough grit sandpaper until the pole mount fits without getting stuck. assembly screws:…
Is a functional 3D printed mini siren siro-drone. It uses a DC 130 3V motor or a motor that the size fits in the holes. Isn't original. The original is here: A look of how it works:…
Chassiron lighthouse (phare de Chassiron) scale 1/100 Model height is about 49cm The reel lighthouse is black and white but feel free to choose 2 different colors. I created a small base that make the model more “sexy”. The pink one on…
This is a plate to house the XM+ and Zeus Nano VTX on the Avant Siro frame
THIS HAS NOT BEEN TEST PRINTED! PRINT AT YOUR OWN RISK! You need sammysung 29 motoroto (any works) Allen wrench and m4 eyebolt too PARTS NEEDED: Weights: https://www.amazon.com/gp/aw/d/B06XDHXRT7/?th=1 M4 Screws:…
So, this is a 1/2 Scale H.O.R Siro-Drone. I might work on a Sirex soon, but for right now I just have this. You need a Samsung 29 motor for this, any of them work (I think), M4 allen wrench, and M2 (I think) allen wrench. You also need a…
Lots of years ago, I designed Pandy, a very creative and unique phone stand available on Cults3d. Though, it had some places where it can be improved on. So this year, I decided to rethink the design and add on my love of kakapos and I…
https://buymeacoffee.com/stealthyscw This model was a made from scratch solution for mounting the Masimo iSirona EMR capture device onto Dräger vents or Philips V60 vents. Masimo does not offer a mounting solution for these units when…
I changed the fixture of the cooling duct of the 3D printer. I fixed a sirocco fan with a duct to the hot end. The position can be changed to correspond to short nozzles. The use duct was referred to the following. Thank you for taking…
Motor used:…
https://buymeacoffee.com/stealthyscw This is a one off all-in-one design for mounting the Masimo iSirona system and accessories. Features: power adapter mounting cable management M4 thread inserts for robust longevity Requires a "channel"…
Is a doble-tone siro drone. I didn't pinted it but if you want to print the hole siren go to:
Replacement heater vent outlet for Siroco Minox cabin heater. For 60mm pipe. Step file for easy modification. Original vent outlets are thin and brittle, this is optimized for 3d printing and stronger. Print in heat tolerant material, at…
Addon for JN printing's siro drone made on tinkercad
Sirocco is a one-piece sculptural vase shaped as if a steady wind had moved through it. The centerline bends gently in two directions, the oval body turns as it rises, and the opening finishes in a continuous swept crown instead of a…
Printer: Bambulab X1C Filament: Creality PETG Color: Red Supports: Yes; only for the motor cover bottom skirt holders. Put support blockers everywhere with an overhang so supports don't go into it. Rafts: No Brim: Depends on adhesion…
A small Massironi styled shelf while I work on something bigger Suitable for small items, can be hung using small nails. Mine has yet to fall off the wall My Print settings- Nozzle: 0.4mm Layer height: 0.2mm Infill: 20% Infill Pattern:…
30CM diameter Massironi Shelf Seems to print best when pieces are upright (laying piece down saves time if you want to experiment). I pieced my shelf together with out having to shave down any plastic and it should fit snuggly together. I…
Hate the drops of siroop running down your glass bottle? Use this dispenser. Print in TPU.
This is a Siro drone siren. It is fully functional and requires a DC 130 3V motor to operate. This siren is not particularly large, but that does not mean it is quiet. Unfortunately, the Hula Hor siren was taken out of service in 2023.…
3D printable topographic miniature of Milano, San Siro - 🇮🇹 Italy Capture the beauty of Milano, San Siro 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 45.477,…
Model of an H.O.R Siro drone siren. Very under detailed, but I tried my best. Hope you enjoy i guess
yall can figure out how to put it together urself NOT TEST PRINTED! PRINT AT OWN RISK! 4M screws, and 29 Samsung motor needed. https://www.amazon.com/Miniature-Bearings-Pre-Lubricated-Support-8x19x6mm/dp/B0DTK31TLJ/ref=sr_1_1_sspa These…
