Counting matching models…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Mittelkonsole für Suzuki Samurai sj413 mit supports gedruckt auf Ender 3 V3 Plus
I wanted away to use 14500 lipo battery's (AA sized) with my SJ4000 clone action cam. I also added a gopro style mount to the bottom. Requires AA spring and dome plates plus some wire and female headers. More info at the blog post below.…
Print Settings: Material: PLA Layer Height: 0.12mm Infill: 15% Supports: Tree Supports (Organic) Creation Process: This model was created using a hybrid workflow combining AI generation and manual 3D sculpting: AI Generation: The base…
If you are having trouble with the transfer case being stuck in neutral, you may need to replace the shifter bush. To remove the shifter bush, remove the boot on the inside of the vehicle, then remove the boot on the transfer case, then…
This is a Dash Cam mount for a 2013 Toyota Tacoma. It mounts a SJ4000 camera (may fit GoPro's) discreetly up behind the rear view mirror. The mount clamps to the rear view mirror post and uses a few 4-40" Screws and Heat-Set inserts for…
This is the rear scan of a 1988 Suzuki Samurai. Should be the same as a Jimny and a Sierra. I took this to design a bumper for it, and it should work for other needs as well. If you design something cool with it, share a pic!
Naked frame for sj4000 action camera 28.3g weight. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Solutech PLA Black Notes: PLA and .2 layer makes the face lock to…
Printed in Ender PLA 0.16mm layer height with 30% infill and zig zag supports in cura. 1hr 38 min print time and 10g 1.75mm PLA (3.42m)
A scan of the bed area of a Sj413. The poor thing is a bit hammered but its what I have to scan so I scanned it! It should help you design some stuff to bolt into the rear. Its a early 1988 samurai, should be the same as a Jimny and…
Created this remix to be able to use the SJ4000 on the Johnny FPV frame, I like this SJ4000 case and wanted to be able to use it on this frame. Print Settings Printer: Anet A6 Rafts: No Supports: Yes Resolution: 0.20 Infill: 0.20…
With this adapter you can attach your SJ4000 Cam to a tripod head with Arca Swiss exchange system. It features an open quick release clamp to quickly remove the camera to change the battery or anything else.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA Sunlu Matte Red PLA Anycubic Vibrant Yellow PLA+ Sunlu White This print uses 4 unique…
The box and the insert are printed from what we have. And you can choose the maximum layer thickness! For the sealant, TPU is the best choice. But it doesn't have to be.
100%infill 0 top wall 0 bottom walls initial layer height 0.16 layerheight 0.08 or 0.04 infill monotonic filament Swap Instructions: Start with Black At layer #7 (0.64mm) swap to White At layer #21 (1.76mm) swap to Sunflower Yellow At…
As someone who grew up watching Dragon Ball after school and still enjoys the series more than 30 years later, this is one of those models I always wanted to have on my shelf. I tried to capture the essence of the most wild and…
Its a remix from tlanfer. Thanks for the design. I just added 15 and 20 degrees. 10° - tested 15° - not tested 20° - not tested Update: Added Plate for SJ4000 not tested Please upload a photo of your make. This design is not for…
Replacement clip for Honda Concerto "side skirt" 91520-SJ4-901_ｻｲﾄﾞｼﾙﾓｰﾙﾃﾞｲﾝｸﾞ Done fast as I needed it asap and no replacement parts are sold or available anymore, not 100% but works on my JDM car, not sure if its the same on Rover/euro…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA Sunlu Matte Red PLA Anycubic Vibrant Yellow PLA+ Sunlu White This print uses 4 unique…
The box and the insert are printed from what we have. And you can choose the maximum layer thickness! For the sealant, TPU is the best choice. But it doesn't have to be.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #15 (1.28mm) swap to yellow At layer #17 (1.44mm) swap to White for the rest.
Gridfinity bin for six sjcam sj4000/5000 batteries, with magnet sockets. Made using Lev Mishin's GridfinityGenerator plugin .
A simple tripod mount for the Qumox/SJCAM/SJ4000 (and possibly other clones). The camera snaps into the support tightly. The mount has a threaded hole for a tripod screw. The camera can be mounted in both directions (facing the clamps or…
SJ413 logo printed in ABS or ASA to prevent sun warping Ironing on top surfaces Raised lettering Grey, base Black
Requested to change the cam mount, to accommodate the SJ4000 camera. 18 Dec 2017*Updated holes for buttons and lens Category: R/C Vehicles
english: I remixed the GoPro-connector a little bit. With this piece, you can mount a GoPro or, in my case, a SJ4000, to the upper right side of your German-RepRap-NEO-Printer. I did a timelapse with a shot every 20 seconds:…
