Counting matching models…
Recommended slicer settings: Layer height: 0.1 Initial Layer height: 0.1 Infill: 100% Print material: Preferably ABS+ or ASA, although I've printed it using PLA and it's holding up well. Tutorial: A good tutorial on how to use the shims…
Das ist ein optimierter Looping, dessen Einlauf an die Steigung der Schiene angepasst wurde. Somit ist es möglich mit einer Standardschiene und 4,5cm oder 5cm Höhensteinen, eine Kugel durch den Looping zu schicken. Wenn die Kugel mit…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
See https://www.printables.com/@Dom360/collections/1929103 for more gravitrax junior pieces Update: updated models to not catch the marble if its going too slow
Like my cows: https://www.printables.com/de/model/302165-cows-for-slopes-ramps-and-flat-surfaces-1-148 I now need sheep for my Thornycroft-JJ-type double deck cattle truck (I will upload separately). Since the sheep offered by model…
Creating a cattle body for my Thornycroft-PB-lorry I liked to have a cow walking in/out. There are a lot of cows available on the marked from different model railroad makers, but surprisingly all of them assume a flat surface, what would…
This model is compatible with the lego system.
All Slope LEGO Brick from the application LEGO Studio. 15 real Bricks LEGO (with the logo on it)
This model is compatible with the lego system.
Print with 30%-50% triangular infill and .05 or .10 layer height. The screw holes are designed for Grip Rite #8 x 1-5/8 in Wood Screws. For more strength, adjust the hold to an upright position, with a slight lean to the side that will be…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Great additional 3x2 Slope compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. The 3x2 slope is a good addition to the 2x2 and 4x2 slope from Hubelino. Did some optimization for better printing, like…
This model is compatible with the lego system.
I totally used AI for the image, I had to correct it to be exactly like the actual model. You should be able to download what you see and not the terrible model AI designs. This took me about 45 mins to design.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
All slope inverted LEGO Brick from the application LEGO Studio. 5 real Bricks LEGO (with the logo on it)
This model is compatible with the lego system.
This model is compatible with the lego system.
A ball sloper hold for vertical to very angled walls Vertical walls: Easy Slightly Angled walls: Moderate Very Angled walls: Hard 11/27/23 I just listed my pack of 12 climbing holds on cgtrader and Cults3D for a very reasonable price. I…
This model is compatible with the lego system.
This model is compatible with the lego system.
See https://www.printables.com/@Dom360/collections/1929103 for more gravitrax junior pieces
This model was deleted by corporate request. The photo is of a slightly older version. Raises the seat 19mm, bolt-on. Designed to be printed with no supports, the thin front-facing face as is the side attached to the build plate. Print in…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Updated version of the model can now be found here . Enhance your GraviTrax Junior experience with extended tracks by printing your own slopes! Designed for convenience, this model is crafted to be printed without the need for supports.…
lego 11477 (White Slope 1X2 Curved)
This model is compatible with the lego system.
The ride-by-wire throttle on the 2020 KTM 690 Enduro R has some play in it, a bit of slop when closed that I didn't like. This pair of spacers removes that. Note that there are two different spacers; you must print the pair. Print…
Someone was in a rush coiling up the rope for these little bowls. See here for video: https://youtu.be/OFQux_iwGis This download includes one version. See here for five additional versions: https://than.gs/m/913341 There are five…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Same as original with sloped side and without logo
This model is compatible with the lego system.
Remix from https://printabrick.org/bricks/3038 which was not printable due to non manifold errors. Print instructions Category: Construction Toys
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
29/09/2024 Following 3DeezNutz's comment I have uploaded the correct version of the Spong_Holder_Plate_V2.stl file.
Ant Feeder Collection - SLOPED EDGES Square Feeder 39x39x7mm Round Feeder 44x44x7mm 3 Compartment Feeder 39x49x7mm
If you have any questions please let me know if you do Happy printing
This model is compatible with the lego system.
If your bathroom cabinet is not much higher than your electrical toothbrush all the fancy designs in the web are not feasible because of a lack of space. That's why I tinkered a height saving design which is around 1 cm less than a free…
This model is compatible with the lego system.
Slope 45 degree 2 x 1 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
EASY PICKUP- Ant Feeder Collection Square Feeder 39x39x7mm Round Feeder 44x44x7mm 3 Compartment Feeder 39x49x7mm
This model is compatible with the lego system.
Lots of people have been saying this controller is almost perfect but has too much slop…so I decided to do something about it. ____________________________________________________________________________________________ I have 2 parts…
This model is compatible with the lego system.
SLOPED Standard-sized WHOLE PANS for your Watercolour Palettes! Two versions! One with a flat area at the bottom only, and the second with a flat area at both the top and the bottom of the slope. The horizontal layer lines which are a…
This is a scope mount designed for firing projectiles with a lot of drop over distance (specifically foam darts). It was designed around a 30mm diameter scope, but the open top design should accommodate almost any size scope (not tested).…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Gridfinity Box with label and slope and FreeCAD ( Realthunder fork ) file. Gridfinity system was invented by Zack Freedman. Watch it in youtube .
This model is compatible with the lego system.
https://www.buymeacoffee.com/maxt ---------------------- Size it up/down as you wish - make it small, medium, or go large! Use it with or without a saucer - it all depends on your usage. No matter what, I suggest adding some felt pads to…
This model is compatible with the lego system.
A pottery rib for throwing a pot or cup with a small foot and then a gently outward sloping wall. The rib measures 150mm tall. Measurements are on the rib to help check sizes while throwing. I print mine with PLA and don't have any issues.
WORK IN PROGRESS - More variants will follow Update 19.2.2023: Added a few new variants Compatibility This model is an inset for my Base Tile (Print "Base Tile" and “Connector”) Print Base Tile (Print "Base Tile" and “Connector”) or JDO…
Glaxy Black PETG used with 0.1mm layers - the parts are so small the print takes no time and they are very visible so good to have a nice finish. They are a nice press-fit.
Slope 45 degree 2 x 2 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or…
Version of Duplo brick generator, where you can generate sloped bricks. Not perfect, there some bugs but works fo some basic designs. There a STL file for standart sloped brick with 2x3x2 70676 base which is default in the generator. It…
This model is compatible with the lego system.
This is a marble run for Lego bricks, designed for 14mm ball bearings. The tracks are parametrically generated in OpenSCAD and are made up of five track types: Straight (flat) Straight (down) Curve Speed variation End piece The marble run…
test for overhang angles 55°-80° (80°-90°) and vase mode
Wobbly - The Slope Walking Automaton robot by Cevinius. Print instructions I used the Prusa silver PLA came with the MK3S to print this.
This model is compatible with the lego system.
These rails have been slightly extended to accommodate gradients that cannot be handled by standard rails. Having a few of these on hand can be very useful in a pinch. Since it can be difficult to identify these slightly extended rails…
An Oloid is a developable surface made by intersecting two circles at a right angle and lofting the surface between them. Print instructions Note that the file attached is 1/4 of a full Oloid . In order to get the print to sit flat on the…
I printed this model in PTEG with just a small support for the cable channel. But if your printer is good at bridging it's probably possible to print without any support material. I have no idea if this works with the newer gen2…
