356 models
New files as of December 4th, 2022 . including several variations of a star topper for the tree (Regular star, exploding star, topper for the candy platform, a replacement topper, etc.). Also a platform-less tree as requested by another…
Print approx. €4.34–€5.30 excl. taxPreliminary estimate for one variant
It's a pastry cutter. It's very simple. Height is 6.5 cm, width 6.4 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Super Smash Brothers Sans Character with Blaster in Crouch Position.
Print approx. €2.57–€3.15 excl. taxPreliminary estimate for one variant
A holiday gift box with only one way in: destruction! This is a one time use gift box. Put a pause just before the lid draft, insert your gift, and resume printing. Put another pause at the ribbon for a color change. The box size as-is…
Print approx. €15.86–€19.38 excl. taxPreliminary estimate for one variant
My oldest is really into this game and competes in esports so making this for him and his friends. Super Smash Bros logo, able to do color change for multicolor. If importing the OBJ it may have some errors and will need to be set flat on…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
A wax stamp that should help you mimic the invitations that the characters are sent when they join smash bros. I couldnt find a model anywhere that was close enough to what I was seeing in the smash character announcement videos. So I…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
I designed this model based on the iconic cartoon scene where Plankton is crushed by a foot, making a simile between the boot and the door, where in both cases the character is crushed, giving a funny and comical touch to this gadget.…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Devil Car : Super Smash Bros
Print approx. €8.84–€10.81 excl. taxPreliminary estimate for one variant
Ashley - Super Smash Bros
Print approx. €5.54–€6.77 excl. taxPreliminary estimate for one variant
The model is quite self explaining. Print it, insert it into the original card game box. the tolerances for the cards are rather tight. Model file was created with Autodesk Inventor 2024.
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
This is a storage box for storing the base game + 3 expansions in one single box. It has a seperate storage tray for victory points and also a sliding lid. I added the Fusion360 CAD files if you guys need to make changes.
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Simple Christmas ornament with Christmas 2020 on it, put in a blank one if you would like to personalize it. Print instructions Category: Decor Summary Simple Christmas ornament with Christmas 2020 on it, put in a blank one if you would…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for one variant
Boone : Super Smash Bros
Print approx. €5.18–€6.33 excl. taxPreliminary estimate for one variant
Be careful, if you download the only_elf_support file, it's mean only the support but you need to merge with the original elf. The elf_with_support file, it's mean the support AND the elf.
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for one variant
Falko : Super Smash Bros. Brawl
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant
Inspired by the fullcontrol.xyz Pin-Support Challenge and the Arc Overhangs shown by CNC Kitchen , I wanted to print a chrismastree diffuser with 90° overhangs without support and here is the result. The overhangs are nearly perfect flat.…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
swiateczna dekoracja bozo narodzeniowa bałwan led wzraz z kijkami do wbicia
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Smash! If you like my models, please like, share, download, make and all the amazing good stuff! Most Dice Towers are awesome additions to your board game experience. But it doesn't make rolling the dice any easier. If anything, it makes…
change the color of the filament at 5 mm to accentuate the inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER
change the color of the filament at 5 mm to accentuate the inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER
Nette Abdeckung für die Anhängerkupplung =)
Super Sonic Trophy from Smash Bros for Wii U except without the chaos emeralds or base. Flattened the bases under the feet so it can stand up.
Most of them are pretty good, but Kirby doesn’t have visible eyes because they’re just textures in game. It’ll just look weird if you don’t paint Kirby. Please like and follow me! If you have any questions, complaints, thoughts or…
Smash Trophy - Super Smash Bros. - Twisted Be sure to check out the other version
He’s definitely going to need supports, and I also recommend scaling him up nice and big before slicing if you want stability and the fine details. Have fun with this, and if you want to see more, give a like and follow me. If you have…
Highly collectible 3D printable NFC tokens for use with Nintendo video game consoles. Designs for all 91 amiibos in the Smash Bros. series. Note: Prints in one part! You're expected to insert the NFC tag halfway through the print. No…
change the color of the filament at 5 mm to accentuate the snowflake inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER
vymodelováno ve FreeCADu
Smash Trophy - Super Smash Bros. - Pillar Style (easy print, no supports needed) Be sure to check out the other versions I have of Smash trophies.
Let me know if there any other video game characters you'd like to 3D print :)
The original Chrismas series designed by HardPrint co. is released! Original super cute design, without support and easy to print. This file is not for commercial use. If you need commercial use, please contact us for license.…
Easy to print, expanding Christmas tree fidget! Celebrate the season and entertain yourself or kids.
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Please post you prints Filaments Used: PLA PolyTerra Charcoal Black PLA+ Esun…
I present full model of a Cyberpunk 2077 character - ADAM SMASHER. This model is ripped from the game by the program Ninjaripper. On the pictures it has ~28 cm (480% scale of the original files). Printed on anycubic photon mono 4k
Da mir der Sound von den SMAS Lautsprechern viel zu leise war habe ich mir diese Trichter konstruiert und gedruckt um mehr Lautstärke zu bekommen. Mit dem Audio Booster ist es ca. doppelt so laut Mit Ohrpolster ist das mindestens 3x so…
Small figurines for a nativity scene
Chess Set 3D Model
Snoopy Chrismas ball. Easy to print. Print face up and change filament. Enjoy!
Quick fun print A Lego plate smashed flat between the pages, and the option to put you're favourite mini figure on top.. Printed in 0.12 layer hight 0.4 nozzle pla and as requested, an extra thin version : the lego 4x2 extra smashed
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Tinkaton (Hammer Smash), Statue,
Produced with the awesome support from my Patrons! Here is my take on a futuristic shipping container. It can be used to ship medical supplies to Eros, or ammunition to Armageddon. An added feature is automatic atmospheric control keeping…
German helmet themed car decoration 50mm diameter
Printable logo for Smash 64. It's currently split into two STLs, one with color swaps required mid-print (for the Smash word). The other is just the "Super Bros" and I glued those to the first print. I'm sure this could be set up better…
So I remixed something else that was just a canister but it was not for anything it just had a neat design. If someone recognizes the design I'll gladly attribute to it, but it's so far from the original, I don't think it's that much of a…
King K. Rool Trophy from Super Smash Brothers for the Wii U
Remix of the nintendo switch comfort grip by @venegade Recently been playing a lot of Super Smash Bros Ultimate, and wanted a grip with the logo embedded. Category: Toy & Game Accessories
Sans Super Smash Brothers Key Cap
A valve with 3mm hole for breath reduction. Be careful when using it, it is best not to use it alone - stay safe :)
I need to create a custom attachment for a gas mask and had to model a thread to fit my need. (since i could't repurpose the ones i've found here) The thread turned out quite nice, so i decided to share it. Since its just a thread with…
The piece dé resistance! Top your Kreesmas tree off with this docked mothership. As seen in the Stargate movie :) Goes well with https://www.prusaprinters.org/prints/8060-stargate-kreesmas-tree-ornaments Print instructions Unassociated…
Festoon your XMas tree with these jolly ornaments from everyone's favorite sci-fi franchise! Yes, that's right! Hang these fine symbols of false gods and other things in you tree and have a Merry Kreesmas! :) The collection is now…
Little Mac from Super Smash Brothers
Had it printed the PETG because it is more flexible - Material: PETG - ASA - PLA - Printed without support - Height: 0.20
Tree, Crate, bush and some extra decoration to glue on tree and bush. Multy part for multi color result. No supports needed.
For collectors like me. A cheap and simple gas mask filter dummy. For display purposes only. No supports needed.
Created just for fun to help spread joy and cheer to all the K2 Filament Clip fans this holiday season. Prints without supports and snaps/slides together. A drop of glue make be used to attach the tree base to the tree top if used as a…
A custom Waluigi figure for the Smash Bros series. I had issues printing the tennis racket so there may be a new version later down the line. Category: Toy & Game Accessories
This one is simple, I just took venegade's design in Fusion 360 and added the smash logo to it. Hope you like it.
A custom amiibo based on Kirby's Smash Ultimate pose The figure is being held up my a clear plastic dowel, you should be able to pick up a pack of them on Amazon for cheap. All my figurine and statue models will always and forever be…
4 replacement heads for the Jakks Pacific 4' Modern Sonic figure to make him look like Super Smash Bros. Brawl Sonic.
I could not find a coin like this, so I decided to whip one up for my brother's game night, enjoy! I just printed it in black as requested, so if you go with other colors post your make, I'd love to see it!
Parametric honeycomb inserts for the Prusacaster (and the knob holder portion from the BexGears remix by MrJamin). Modify the parameters of the inserts to achieve your desired thickness and/or to suit your printer's tolerance! I also…
I designed a Smash Bros trophy for a tournament. It's in two pieces so supports are not required. The top plugs into the bottom without the use of glue. Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.2mm Filament:…
The source marked this model as adult content.
Necromolds custom molds for house rule : Pumpkin Smash! You can find the rules of Pumpkin Smash made by LieutenantDan on Necromolds's discord Print settings : for best result on FDM printer print at - 0.08mm layer height - about 20%…
A simple three part trophy for awarding smash tournament victors. The model is in three parts to aid in the painting and finishing process, and each has two holes for alignment that 1.75mm filament can be pushed snugly into in order to…
I wanted some smashburgers, so I whipped this up real quick in Fusion. Print with around 50% infill. DO NOT LEAVE DIRECTLY ON GRILL/GRIDDLE. Place wax paper between meat and griddle.
3D printer chrismas ornament
Es una coleccion de 10 fantasmas creados por mi :D It is a collection of 10 ghosts created by me.
Hello this is easy to print Chrismas flexi octopus i printed mine in pla 220 C doesn't require supports Happy Printing :)
Rounded edges design update with 2022 year tag to fit whitout any glue, press fit in it! PRO TIP: print a lot of 2022 with the same filament and spread it across your christmas tree. It marks the year everywhere for your christmas picture…
https://openscad.org/advent-calendar-2024/ № 1
Printing Recommendations Best would be to print this at a layer height of 0.2mm. This way the background is only 2 layers thick and when put in front of some lights (lights in the xmas tree) it will create a nice glow effect shining…
Bio Hazard Gas Mask Door Knob. I've included a 2.5mm hole for a 3mm self tapping screw. Print Settings Printer: DaVinci 1.0a Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Category: Decor
a nice christmas three u can use as decoration!
LEGO insprired Chrismas tree inspired of “Lego pine tree (3471)” I have used small chain lights from Amazon to wrap around the tree and inside the star https://www.amazon.de/-/da/dp/B0BR7N5V1M?ref=ppx_yo2ov_dt_b_fed_asin_title
a model i made to place an amiibo token underneath the figure, if someone could add the charms(because if i fix it to be printable the charms disappear), i would be really grateful because I'm not a profesional 3D modeler
The D13 model shown in the pictures is at standard (100%) scale. There’s a hole designed to fit a piece of 1.75mm filament, and the disk is printed separately.
Layer hight for the strings work should be 0.3mm. For others, don't care. Feel free to contact me if you need support on printing this model and modify the model. I use PrusaMK4, 0.6mm nozzle. christmas tree-3-0 v0: no holes for emitting…
Decoration for light chain. Vase mode
Hey I designed this Smashburger squisher I guess you could call it, 21 who loves burgers and loves smash burgers this is your best tool to make the best burgers
This is a 95 mm diameter coaster.
This is a beautiful low poly chrismas tree and he can decorate your house during chrismas
Couldn't find a model for free. He's part of my low poly video game character collection. I love him. Credits to Nintendo and the ripper on the Models Resource (ComJay)
KissMas is a member of the 2019 Holiday Collection. At the bottom of this summary, you’ll find a list of all the members of the collection. Kissmas is a special edition of KissKiss from my 2019 Valentine Collection. Additional "words"…
Models are optimized for: 0.4mm nozzle. 0.2mm layer height. 4 layers top & bottom. Color change after layer height 3. Print thin walls function enabled. Used Scotch double sided tape for mounting.
The original parts https://www.thingiverse.com/thing:3096789 had many overhangs and areas requiring support, making the print very difficult. I have greatly reduced (not totally removed) the majority of this making for a cleaner print. I…
Dale un toque encantador y espeluznante a tu decoración con estos mini fantasmas impresos en 3D. Cada figura está diseñada con un estilo único, combinando formas suaves, expresiones divertidas y detalles perforados que capturan el…
This is a Christmas Tree Ornament featuring a simple yet elegant design perfect for the holiday season. The ornament consists of a circular frame with a stylized pine tree in the center and a crescent moon on the right side. This is a…
Diorama for Wekster Mini Hulk Dude Walls and Floor printed with no supports as long as walls are laid flat and facing up. Bricks should not need supports. You can print as many as you want, depends on how many you want to put down. All…
