Counting matching models…
I originally designed a replacement 3D printed knob for a Smeg oven after struggling to find a replacement. I've since added a total of 7 customisable Knob designs and 5 customisable Inserts that can be mixed and matched to create the…
This is a stand to support the filter handle for a SMEG Expresso maker rather than just sitting the handle itself on the table surface when tamping down the coffee puck. The SMEG uses 51mm basket and the filter handle body is approx 60mm…
Hello ! If you like my work, please rate it. My brother repairs coffee makers as a hobby. A regular problem in a Tchibo Esperto coffee machine is that these gears break. Often, aftermarket gears don't last long either. That's why when he…
eRacing-Lab RSMEGA or SFX100/150 25mm diameter cable holder for aluminum profile with 8mm socket for M8 16mm screw max.
Arnold Jidáš Rimmer, BDP. SDP. Maaaaaaaaaaaaaaaagooooooorrrrrrr!!! :))
This is an insert for the New Edition of the Board Game Trismegistus. It will fit premium sleeved cards and the upgraded pieces from the Kickstarter. It includes a tray for the Familiar expansion. There is a minor lid lift - 2-3 mm Happy…
A simple holder for SMEG coffee maker portafilter.
The teeth of my dough mixer were destroyed so I made this, they work great printed in nylon but for sure won't last as long but its just a couple euros print so not that important. I reccomend using 50 perimeters to make it solid and I…
I printed my first parts in PETG, but when I used them, once I pulled them out of the dishwasher, they were deformed. They couldn’t handle the heat inside the dishwasher. That’s why I printed them in PCCF "Prusament PC Blend Carbon Fiber…
So following on from a reddit post I saw a while back where someone had made a 3d printed version of their fridge as a magnet for a competition (maybe Thingeeverse or here on pintables???) I made this one that matches my wife and I's Smeg…
I picked up a dishwasher, but there were a few pieces that were broken.
Replacement Timer Control Button for older SMEG cookers (2010 ish). These are not available from SMEG as a spare any more and the replacement is 3mm too long. Printed with supports and 90% infill in PETG. Probably overdid the infill but…
This tool holder is made for the accessories for the Smeg Kitchen robot. There is a version for 1 piece and a version for 3 pieces. You can attach the tool holder with double-sided tape or screws. This is printed in white PETG with layer…
There were often cutlery that fell through the basket because they were damaged so I modeled new backdrops. I also modeled clips to prevent the top basket from tipping when there were only a few cutlery.
Designed with Onshape: link here if you want to modify to your needs
Needed to add a kickboard to my Smeg oven. Printed these mounts so I could have a removable kickboard that fits snugly. Printed in PLA, 0.2mm layer height, 20% fill. Orient flat on bed for best strength.
I printed my first parts in PETG, but when I used them, once I pulled them out of the dishwasher, they were deformed. They couldn’t handle the heat inside the dishwasher. That’s why I printed them in PCCF "Prusament PC Blend Carbon Fiber…
I had a few incidents where some members of the household accidentally turned on the oven without even knowing. The last time it happened our supper ended up being a charred mess so I designed this to "lock" the knobs in place and…
Two variants available; 1.5mm and 0.75mm. Print at 100% infill. Remove the knob by pulling, mount the washer (chamfered side towards the knob for easier mounting if your dimensions are a bit off), and put it back. Voilá! The pressure from…
Whilst servicing this ~ 15 year old range-hood I noticed the plastic end caps/pieces of the pull-out shelf thingy (that's the technical term) were cracked and coming apart. A short time later I had 3D printed replacement parts which I…
Holder for whiskers of smeg hand mixer.
트리스메기스토스 신버전의 도구 타일을 감싸 주머니에 넣어 섞을 때 타일의 모서리가 손상되지 않게 보호합니다. The new version of the Trismegistus tool wraps the tiles and protects the edges from damage when mixing them in a bag.
This is an insert for the New Edition of the Board Game Trismegistus. It will fit premium sleeved cards and the upgraded pieces from the Kickstarter. It includes a tray for the Familiar expansion. There is a minor lid lift - 2-3 mm Happy…
I designed this tool out of necessity when our dishwasher started leaking. The first step of the repair was to unscrew the air break nut… and there was no chance to even properly grab it - it was angled, it was slippery, it just wasn't…
Replacement for broken gas knob for a SMEG stovetop. I suggest printing upside down.
Print in Transparent PETG. I used 0.15 Structural and 30% Infill on a Prusa Mk4. Be careful when fitting as the LED holder can put a lot of side force on the part and break it if you don't push it on exactly parallel.
Blocks the (unnecessarily bright) display on a Smeg oven from one side, while letting you see it from the other side for normal operation. Doesn't require any attachment, it just squeezes in to a ~13mm gap. I haven't actually printed this…
This is pretty niche, but one of the Supermarket chains in NZ was giving away SMEG spoon rests. I liked the look of them but didn't like that the spoon had to rest horizontally on the bench so I made an adapter for it. This was mostly an…
트리스메기스토스 신버전의 도구 타일을 감싸 주머니에 넣어 섞을 때 타일의 모서리가 손상되지 않게 보호합니다. The new version of the Trismegistus tool wraps the tiles and protects the edges from damage when mixing them in a bag.
I made an insert for Trismegistus. This is the new edition. And includes all campaign upgrades. I follow the design of the one they sold on folded space. It firs everything. Originally, it suppose you put the bag on top of everything, but…
Simple remix of https://www.printables.com/model/363923-upper-wash-arm-p2-smeg-essentiel-b-ref-694570055 Trying PETG, will report back... Update 23/08/2026: added v2 with tighter tolerances. PETG failed but ABS is holding just fine.
Requires 3g of filament. Print settings 100% infill for max stability print in PETG or similar as PLA will melt when grinding too much coffee at once Design by Josef Holfeld (permission for upload granted)
The tabs need to flex before snapping into place, so don't use PLA. Also, PLA would probably sag and melt with the heat of the oven too.
