Counting matching models…
I recently made a standard bottle cap container and I had some smoothie bottles, so I wanted to make a bigger bottle cap container for those. There are standards for various bottle caps, and all 3 smoothie brands I tried follow the…
Smoothie Deckel mit Dichtung, zum wiederverwenden der Flasche
Hi, this is a straw-covered cap designed for bubble tea or smoothies, and now I'm using it for my gym water bottle. The connecting part is very flexible, and I printed it using PLA+ without support. It's a simple design and useful in…
Easy to make a cute Smoothie keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊 Check my ongoing project of all dashboard symbols into keychain. It has now 150 keychains.…
Easy to make a cute Smoothie keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Be sure to print in PETG or another food safe filament, and wash by hand, not in a dishwasher. Recommended Print Settings: Resolution: .28mm Infill: 0% (doesn't matter) Walls: 1 Adhesion: 15mm brim Supports: No Filament: PETG
At my local grocery store, they were giving away hundrets of smoothie bottles for free. So I took some home and designed this bird feeder for them. It works with Bottles that have a 38mm thread and the top part (to hang the bird feeder on…
Ring to fix nutribullet smoothie maker cup after all "teeths" breaks off. It slides over the bottom of the cup and glues.
Fits every 20oz blender cup I own, even pint glasses well. -Cheers-
To save the beautiful old machine from scrapping i made a printed this part that connect the engine to the knife. Original part was aged and fall apart. Print instructions 0.2mm 100% infill
A compact drying rack to dry help dry the bottle of your WMF Mix n Go Smoothie Maker.
Revel Bedtrack Smoothies Here's a demo: https://youtu.be/f374Q\_momYc Make your Winnebago Revel's garage safer with these bed smoothies. They were designed for use with the GLSS, but also work without the GLSS, so they don't catch and…
Der Trichter passt perfekt auf dem WMF smoothie maker. Lässt sich einfach aufstecken. Gedruckt habe ich den in PETG 0,15mm mit Fuzzy Skin.
Smoothie machine for Baby Doll
Food pouches are held in place securely to prevent accidental spills and squeezing. Print settings: 4 perimeters 100% infill No supports Lid is only printable with PETG, PCTG, ABS or ASA (PLA will break as it does not have sufficiently…
This is a replacement for a broken rotary knob of a Kenwood smoothie 2 go. Print Settings Printer: Anycubic ie Mega Rafts: No Supports: Yes Resolution: 0.1 Infill: 25% Filament: Tianse PLA Silver Category: Replacement Parts
1/64 Smoothie King Scale Model glue required no supports intermediate skill level
Remix of the model with a different thread design (3 starts)
I use big truefruits Smoothie bottles as drinkwater bottles around the house, and i needed a place to safely dry them after washing, so this contraption was born. Nothing more, simple and works … bottles dry and stand safely in the sink…
Ein Ersatz-Mitnehmer für den WMF Kult-X Smoothiemaker. Um eine gewisse Stabilität zu gewährleisten, sollte auf ein möglichst Hitzebeständiges Material gesetzt werden. Category: Household
This is a re-mix of my Simple RAMPS 1.4 mount to be compatible with the new Re-Arm Smoothieboard. This mount is beefed up from the original RAMPS 1.4 mount to fix some of the original breaking issues I had. Simple mount that holds a RAMPS…
Inspired by a similar item we saw online, my partner and I wanted something that would hold the lids to our smoothie cups out of the way but still easy to reach. Like the original model, this is designed to stick under the cabinet with…
Dry stand for nearly every mixer bottle made. You can insert a 5mm rod from the bottom to strengthen the model.
The measuring cup of my drinking powder is a little bit to big. For a clean transfer of drinking powder to the mixer cup I designed this print. It fits nicely on the mixer cup. You can print it without supports. The little hole and the…
The plastic coupler was damaged on my Kenwood Smoothie cup for the Smoothie machine. The original part had a skinny design (see the broken ones in the images). Instead, I designed a much stronger and reinforced version which has worked…
ENG/ Self-explanatory, for the WMF KÜCHENminis Smoothie-to-go replacement foot. GER / Selbsterklärend, für den WMF KÜCHENminis Smoothie-to-go Ersatzfuß.
I designed this stand for our four smoothie mixer bottles we store in a drawer. It prevents them from falling over. Also the bottles can dry completely. I added a version for six bottles with decreased spacing to fit a Prusa i3 style…
The blender is unprotected when the container/glass jar is removed. The blade is open which can be a safety issue. The cap is designed to cover the blade. Infill: 25% Support: No
The picture is slightly outdated. This is v2 with a tighter and sturdier nut hold. I printed this with 50% infill. 0.2mm layers. 3 perimeters. But any config is probably fine, use your own judgement.
German: Das originale Antriebsrad oder Antriebsritzel sah nicht sonderlich stabil aus und es ist nach nur einige Male nach der Benutzung gebrochen. Da das Modell nicht mehr vertrieben wird (Jahrgang 2018) habe ich es kurzerhand mit…
For SENCOR SBB 007VT 0,6l. The lower part can be removed and washed. Bottles are placed in the holder upside down. Water
Smoothieboard mounting plate that adapts to the pre-drilled holes for the Melzi on the Mendel90 DiBond sheets by Nophead. The adapter was remade in OpenSCAD, please check dimensions first. I pulled the hole dimensions from the…
Simple adapter helps fit an Oxo food storage container as a sound shield on the Ninja Foodi blender. Interestingly the sound shield does not actually decrease volume (e.g. dB readings are the same before and after) but does significantly…
This is an attachment for a Ninja IQ Smoothie maker, to allow you to stow the power cable neatly. The attachment is designed to lock around the motor mount snugly, but still be removable. It has holes in it to allow air to circulate…
Printed in TPU 90A - does the trick and saved buying another cheap blender for awhile.
Tired of your large cups or blender bottle getting tossed about in the dishwasher - so was my wife. Made her this support to hold her smoothie blender container upright in the dishwasher. Works great for large cups and other containers…
My kids discovered Astroblast recently and like the idea of pretend smoothies. This is a hollow cup intended solely for imaginative play. I used Solid Works and roughly traced the cup. The logo came out way better than I thought it would.…
Tired of your large cups or blender bottle getting tossed about in the dishwasher - so was my wife. Made her this support to hold her smoothie blender container upright in the dishwasher. Works great for large cups and other containers…
Simple adapter helps fit an Oxo food storage container as a sound shield on the Ninja Foodi blender. Interestingly the sound shield does not actually decrease volume (e.g. dB readings are the same before and after) but does significantly…
I designed this stand for our four smoothie mixer bottles we store in a drawer. It prevents them from falling over. Also the bottles can dry completely. I added a version for six bottles with decreased spacing to fit a Prusa i3 style…
Box for the Smoothie Board 5xC. allows for great air flow and cable management. Pylons around the outside to help guide wires, and if you need extra security they are also made to screw lid down. (screw size M3) one side is slide fit and…
Food pouches are held in place securely to prevent accidental spills and squeezing. Print settings: 4 perimeters 100% infill No supports Lid is only printable with PETG, PCTG, ABS or ASA (PLA will break as it does not have sufficiently…
I designed this simple spacer for the Smoothieboard to mount it in the base department of my delta printer (Kossel mini). Works nice - although the ports (SD, USB, Ethernet) are a little white recessed (the stepper motors where in the…
A simple housing for Smoothieboards, versions x3, x4 and x5. With a hole for a 50mm fan to cool the stepper drivers. Cover is screwed to the printer and then the housing is screwed to the cover. Print Settings Printer: Heavily modded…
I needed a case to mount my electronics board to my D-Bot variant. Additionally, I wanted to make use of the Micro Mate-n-lok panel mount connectors I had, so those went into the top cover. FreeCAD design file is included. The lid needs…
Use M3 self tapping screws to install the smoothieboard V1. Mounting holes for the bracket are for countersunk screws, diameter 3-4mm.
