Counting matching models…
I modified the box to fit a small version of the gridfinity system (32mm grid base) to store all the parts of the new version and to be able to take the boxes out while playing. The inner measurements are 133x161x36; the outer…
Why this model? Configurable to you're hearts content with only your browser (no login/installation) No screws/hardware Very easy to print Toolless assembly Generates and centers as many hinges as possible 3D gasket geometry on the…
Koprov's original linker was great, but didn't quite “snap into place”. The V2 requires screws to lock into place, and I wanted to be able to put the connector in from behind so it's not as obvious. I printed this in PETG at .2mm height,…
This is a remix of the original SnapLock Storage Box (Parametric) . THE BEST BOX DESIGN THUS FAR IMHO!!! New parameters were added to the bottom of the favorite list w/in Fusion 360 Parameters interface as shown below. Note: There are…
I needes a storage for my movementruler and the token, so I found this Box and pimped a littlebit. I printed it with PLA, 0.16mm layerhight, 3 walls and 50% Infill. A textured Buildplate gives this box the last finish.
Update: Added Multicolor-Lid People always asks me how those filament strings look after printing and swatches are a good way to show them. i really liked the idea of a collection box for the swatches now that nobufil has their own…
I resigned the body for a $5 speaker at Dollar Tree. When I saw the speaker on the shelf I knew I could make it look cooler and here it is. Assembly: Follow assembly instructions from Hugo's Snaplock Storage for box assembly. Note: I put…
Holds 14 Standard SD cards (incliuding some of the slightly older fatter type). No hardware required, simply clip it togerther, and your ready to go. This is a remix of : https://www.printables.com/model/761101-snaplock-storage-boxes To…
Used Hugos Snaplock box because I love the fact it requires no hardware or filament tolerances. This will hold 3 set of the 50 piece collections from Wago.
Air 65 SnapLock Storage Box – Remix This model combines the SnapLock mechanism by Hugo with the Air 65 storage box designed by Martillito Martinez . It provides a secure and convenient way to store your Air 65 drone , keeping it protected…
A simple to assemble and strong snap box for storing small items - SD cards, etc. Just snap together to assemble.
A simple remix version for those who want to store their solo card in something thematic.
This box is a remix of the dice box design made by @ActionJ. This remix makes it so it neatly fits one set of polyhedral dice with spaces for each seperate die in the bix and lid so they stay in the same spot no matter how you orient or…
I liked the original version made by @51m0, but wanted a more secure clasp. I liked the clasp and hinge from the “Pill Box 2.0”, so I decided to try adding that in. Please get the bit holders from…
I loved the Uno No Mercy box from mteomarch, but wanted something without branding that could hold Nintendo switch games. I used Uncle Flappy's Blank Card Box and designed an insert to hold up to 40 games. The fit is pretty snug, but a…
Insert for SnapLock boxes to store ammunition. Stores 50 rounds with current settings. Parametrics can be changed to your liking or casing size. Settings I'm using for medium rifle rounds. Download the f3d file to edit the parameters…
This is a modified form of this model which does not allow remixes for some reason… https://makerworld.com/en/models/377006-snaplock-storage-boxes-parametric#profileId-282924 I made a med station to use at home here and needed something…
A storage box for your Servd card game. ( https://servdcards.eu/ + https://servdcards.com/ ) The box that comes with Servd can get a little beaten up, since it is simply cardboard. So, I cracked open Fusion, edited a custom SnapLock…
I really like the design of TheForrestFire's Ultimate Magnetic Splendor Box, but wasn't satisfied with the security of the magnets. A friend showed me Hugo's Snaplock Parametric Box, and I decided to combine the two.
EccentricToast's model is amazing, but it didn't have enough sections, so I simply added a divider down the middle. I also included the original .3mf's for convenience, and both a .3mf and a .stl for the bottom. Blank top with no logo…
Designed myself in fusion 360. Perfect for pocket carry of nicotine pouches, small screw or whatever. Feel free to scale and personalize with your own text or photos on the lid. NO AMS or SUPPORTS. Please like, follow, rate, and upload…
TL;DR A box to hold the Ryobi 4 piece countersink set using standard 1.75 filament as a hinge. Why: I needed some countersink bits for sizes I barely use so settled for the Ryobi set. It didn't come with a storage case so modeled this up…
This will fit various Prego sauce jars. designed for Drywall screws.
Outside: 220x195x100 mm Inside: 185x172x79 mm Best print in PETG… You will need six M3x25 screws to assemble it.
I use the parametric model for the snaplock storage box model created by @CarlinWillia_1172294 to adapt it to fit the chess set and lid. It is perfect for that. I also create the internal compartments.
This will work with PLA and PETG and works well on a lower infill, so the box back hinge thing on the original doesn't break off
This case is remixed from the SnapLock V2 parametric design available on MakerWorld. The internal layout has been modified to include six ribbed slots sized for 3 mL insulin or peptide vials, which reduce full surface contact with the…
Customizable Sliding Snaplock Name Tag This is a secure name tag featuring a sliding snaplock mechanism. Unlike static tags, this design allows the nameplate to slide into a base and "click" into place, ensuring it won't fall out during…
I modified the box to fit a small version of the gridfinity system (32mm grid base) to store all the parts of the new version and to be able to take the boxes out while playing. The inner measurements are 133x161x36; the outer…
🔌 SnapLock Conduit Clips – Flat Print, Fold & Fit! (EN Standard, Ø20-63mm) 🔌 💡 Why These Clips? 📏 EN Standard Compliant : Designed for rigid electrical conduits (Ø20 to Ø63mm), meeting European standards. 🖨 Flat Print, No Supports : Print…
I made this to fit around two winchester (10mm, 180 grain) 50 round ammo box inserts. The fit turned out just right. There is a little space above the bullets and below the lid, so I suggest putting in a thin foam liner if you want to…
Yet another quick release fastener. Hold on to cylindrical objects with minimal force. No support needed. I used PETG for flexibility and endurance. My use case is a gate at the top off a staircase. When not in use i want it to be tight…
Inspired by the snaplock lid for the player boxes : https://www.thingiverse.com/thing:4622612 and the snaplock lid for the storage box : https://www.thingiverse.com/thing:4710818 , I made the final one : the snaplock lid for the resource…
Simplify your organization with the Easy-Connect Peg System with SnapLock! These durable pegs feature an innovative ball fastener head, making it easy to attach and detach compatible organizers, showcased on my profile. Experience the…
I used PLA+ and printed the insert with 2 walls and 10% infill to speed the process up, should be around 4 hours. Insert should be printed face down to prevent need for supports. For the box and clip I used PETG and increased the infill…
The original clip is a little difficult to open. This is a modified version of the clip. this clip is easier to open.
had a hard time opening my SnapLock box original post: https://www.printables.com/model/761101-snaplock-storage-boxes
This is a remix of the No Screws Parametric Box. I made it custom sized and extruded the die for the lid (top). All you have to do is do a filament change. Interior Dimensions : 120mm x 60mm x 35mm Instructions: You will need to print 2…
bottom and lid from PLA, PETG, PCTG or ABS, 3 shells, 0,2 layerheight, 15% infill latch 2 peaces from PETG, PCTG or ABS, 4shells, 0,2 layerheight, 25% infill seal from TPU 4 shells, 0,15 layerheight, 20mm/s
Basierend auf dem Vorbild der Aufbewahrungsbox von @Hugo habe ich Inlays entworfen. Für die 3er Version Box 180x60x25 Für die 6er Version Box 180x120x25 Die 3er Version wurde bereits überarbeitet.auf den Fotos ist die V1 zu sehen. Update…
This swatch box is based on the SnapLock Storage Box by Hugo and holds the customizable Simple Swatch . Thanks to Hugo's excellent design, no hardware is required. STLs are included for boxes that will hold either 22 or 30 swatches. Print…
I got this boxes years ago and have been using plenty, eventually adding and removing some features I was mad of or missing. So the drawers got an integrated knob and label-frame and a mechanical interlock to stop them from slipping out…
This is the remix ofSnapLock Storage Boxes to keep your Pavo25 V2 with Walksnail Moonlight VTX safe. It closes easily and can reuse the sponges that are available when you buy the drone. Print with no supports, works fine for me with PLA…
I modified the 60x60x100 box, so that it can store my gold assayed bars.
Store your favorite SD cards in this custom SnapLock storage container. I have also created a 2nd variant that can fit a full-size SD card or SD card to MicroSD card adapter.
Fully printable travel box for my soldering kit. No additional hardware required. Uses SnapLock latches for locking the box closed. Holds a full assortment of kit: TS100/TS101/Pinecil or compatible soldering iron Power adapter USB power…
I needed a container for my new Rösle BBQ Probe/Thermometer so i designed it to fit in the Parametric SnapLock Box by Hugo. https://www.printables.com/de/model/805599-snaplock-storage-boxes-parametric Box Parameters Used: Length: 100 mm…
When u change from a small number of trays to a bigger one, there can be a problem with the extrusion. Swap in the timeline to the last 2 steps and select the wrong sections.
Latch is best printed with PETG. The box works fine with PLA or any other material. Used 15% infill and no supports.
Store pills or other small items in this compact 3-piece model with locking latch. Small enough to toss into a travel bag and keep wherever needed. Can easily be color customized as they are 3 separate parts that easily snap together.…
A much better way to securely store your bobbins. The SnapLock system is by far the best and completely 3D printed storage system I've found. Easily custom color each/all of the parts as desired using the AMS system. You can securely…
bottom and lid from PLA, PETG, PCTG or ABS, 3 shells, 0,2 layerheight, 15% infill latch 2 peaces from PETG, PCTG or ABS, 4shells, 0,2 layerheight, 25% infill seal from TPU 4 shells, 0,15 layerheight, 20mm/s
lock snap button replacement for ergorapido vacuum for the mini head adapter used for handheld vacuuming
Improved version of a storage box to store a Milwaukee set. - 49-57-9001 of screw extractor bits using the SnapLock box system. This container will securely store the extractor bits and allow you to toss them in a garage drawer and/or…
![SnapLock 2.0 - Parametric [Beta] - Dual Latch](https://media.printables.com/media/prints/1042797/images/7905964_2c747e3e-7c14-4b12-b50f-c7caa5d96e49_a3b5c2d5-4e6f-47aa-b831-9d5acb51175a/screenshot-2024-10-11-225305.png)
