Counting matching models…
I often have the problem of making wrong inputs on the snes controller so i made one with four physically separated parts acting as individual buttons i am quite new at 3D modeling so some stl files look a little bit messed up, but print…
Print upright but with support i do 100% infill more pictures will follow
This is a remix of a remix originated by @nolibert's design for the non-North American SNES cartridges then remixed by @jordanhoff for the North American cartridges. After printing off a couple of these I felt they could be better…
I designed this because I was looking for a solution to organize my loose retro games. Universal Game Cases are expensive and rare to find in my country so I designed my own solution. It fits perfectly into a DVD Case with a 32mm back. I…
Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Gray or Black Printing: 0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls No brim or supports necessary Variants: -00 Single Controller Stand Revision…
Inspired by other Kaizo Mario hitbox users' layouts, I've recreated what I'm calling the "Every-finger" layout on . A hitbox is a custom controller that looks like an arcade controller, usually with an asymmetric layout made for fighting…
This holder was specifically designed for cards the size of 89x51mm, but any a bit smaller of bigger should still fit! I also added a small angle of 8°, so the cards are easily visible and accessible while remaining securely in place.
A simple mount for an SNES controller with added Skadis pegs.
This is a replacement cart for the GBA that's in the shape of a USA SNES cart. It should take genuine carts and repros, Reuses the tri-wing screw from the cart. For the label you need to resize it with locked scaling on, If you set the…
A nice multi / duals color coaster of a SNES D-PAD / Super Nintendo Untersetzer Inspired by the button coaster from makerworld, I did my own d-pad version https://makerworld.com/en/models/622719#profileId-546866
Sample 3D scanned with the Creality CR-Raptor in LASER mode. This scan was done in 3 takes. Front, Back, Side. Get a Creality CR-Scan Raptor: https://geni.us/CR-ScanRaptor (affiliate)
Hello this is my nfc card super mario wolrd for tapto. need 25mm ntag215. my print: voron 2.4 layer height 0.3mm nozzle 0.6mm
This is a model I created while living in student housing with a small desk setup. It was convenient to mount as much as possible on the wall to clean up desk space, so I created this to keep all the business cards. The model is designed…
This is a remix of cray_io's model of the SNES Jr cartridge slot tray, with the region locking tabs removed to allow Super Famicom cartridges to be played on an NTSC-U SNES. The model has been updated for support-free printability, as…
I used Prusa Slicer's cut feature to remove the excess slot(s). Prints perfectly fine without supports, just like the original. Used 15% infill and 0.25 draft profile with 3 perimeters with Geetech PLA. Accidental two colored print as my…
SNES Cartridge wall mountable display Wanting to mount your PAL Super Nintendo games for display? These stand will allow you to display them on a wall! I was wanting to display my Japanese SNES games in a shadow box type picture frame and…
An OEM style replacement for the back panel of a SNES or SFC. I recommend printing in the orientation the STL has with supports.
Converts two SNES controllers to USB-C for use on PC, MiSTer, etc. This remix changes the USB port hole to USB-C, mirrors the port orientation to match the design of the original console, and widens the ports.
USB-C Backpanel for the Super Nintendo - SNES. 1x PDC004-PD (12v)
This model is in 3 pieaces so u will nead some glue to asembly it. I didnt printed it printing at your own risk.
Simple stand for displaying a Super Nintendo or Super Famicom cartridge vertically
This case is for the SNES SNAC adapter that was sent out with Batch #2 of the MiSTer Pi mega-pack & turbo-pack. It has board supports, a lip to keep it from popping out the front, and snap-closure. If you use a 0.6mm nozzle, definitely…
A remix of @nolibert's design for North American SNES cartridges. Retained the original faceplate dimensions.
A controller cover for Super Nintendo / Super Famicom Print it in grey color for better result. Enjoy, like and share.
I often have the problem of making wrong inputs on the snes controller so i made one with four physically separated parts acting as individual buttons i am quite new at 3D modeling so some stl files look a little bit messed up, but print…
Just added a HSW mount to make compatible as it seems other ones have been scrubbed off the internet. The plug is slightly off center but it sets level when mounted Just print with slim tree supports and its a very snug fit Remixed and…
Organize and store your powder or shot bushings effortlessly with these wall-mounted racks. The powder rack can hold up to eight bushings with a 0.875" (7/8") outside diameter, while the shot rack accommodates eight bushings with a 1"…
Enclosure for the SNES SNAC adapter that came with the second batch of the Mister Pi. 6 x 20mm M3 bolts 6 x M3 heated inserts
This SNES Switch Dock Stand was inspired by one of my followers on TikTok. This stand is compatible with the Classic Nintendo Switch and the OLED Nintendo Switch. Tips: It is recommended to use supports just on the controller ports only…
I made these after being fed up with having to try and tape and cut to cover the port covers when spray painting. I haven't tested these with a North American SNES version yet, but I think everything is the same. On the off chance that…
This is a wall mount so that you can display your SNES console if you would like to.
As requested by a Reddit user. The dimensions are 80×160×30 mm.
Replacement left and right shoulder buttons for Super Nintendo controller.
Print on side but with support, i do 100% infill more pictures will follow
Print upright but with support i do 100% infill more pictures will follow
Print on side but with support, i do 100% infill more pictures will follow
A clip to screw a SNES controller cable under desk
Results were obtained printing with 0.3 mm layer height on a 0.4 mm nozzle in spiral vase mode. Prints in about 25 minutes. Silver prusament PLA is a nice color match. Enjoy - this is my first designed project, and it worked fantastically…
This is a little organizer for PAL SNES/Super Famicom cartridges. There are 10 sizes for the Organizer, which can hold 1 to 10 cartridges. Dimensions 132 x 21.5* x 16.5 mm *The Y value depends on which organizer you’ll print. This Y value…
As requested by a Reddit user. 7 cartridges, 22 mm “step” height. The _snes_display_7x_tall_ version features 30 mm “steps”. With overall height including a cartridge in the last slot ~269 mm (211 mm without).
This design allows the buttons of the Logitech F310 game controller to be swapped into the traditional SNES-style layout. Some non-reversible modifications to the original plastic shell of the controller are needed. Please be aware that…
This little adapter lets you use an Altera chip socket for testing SNES CPUs and PPUs. Print with PLA to get a clean, precise component. PETG and ABS do not print cleanly enough for this as it is very specifically sized and shaped. The…
A funny office sign, that's all. I painted mine, but a color change would be easy as well. I used octagram spiral infill as top layer pattern.
A homage to a very successful games console from Nintendo and my first contact with the Zelda game series. I printed it out as a test and it works so far. I don't have a Hyperx mouse to test it, though. You have to converte the weel. I…
My SNES Cart Display. I Could Not Find One Exactly Like I Wanted So I Designed This One For My Own Collection And Now Have Decided To Share The Design. Make It, Remix It, Comment On It, Just Please Don"t Sell It. I Printed This On A Ender…
HSW clip-style mount for SNES controllers with cable storage.
a stackable snes games standard. 9 games per row, easy and quick to assemble
A display stand for the 8BitDo SN30 or Nintendo Switch Online SNES controller. Includes dongle slots for SNES and USB. Also compatible with original SNES wired controllers. Purchase: Also available at kytor.com/store Recommended…
A holder to display an 8Bitdo SN30 controller on a Super Nintendo console. There is a model for the American SNES and a model for the SNES Mini. I printed these on my X1C with supports.
This is a remix of Kytor's SNES controller stand. I wanted a version that didn't have the dongle slots at the back, so made it myself. Other than the removal of the dongle slots, some material has been added at the back of the stand for…
This model is for replacing the SNES controller connector outer piece. The original inner part is reused with this design. Here are the printer settings I used on my Ender 3 S1: 0.12mm layer height 10% infill Wall count of 4 Supports,…
The goal was to design a minimalistic enclosure that would allow for inclusion of an arduino pro micro board ( ATmega32U4) and OEM Super Nintendo / Super Famicom (SNES) style controller port. The design is based on a USB-C version of the…
Simple controller wall mount for Super Nintendo Entertainment System (SNES) I have all of my old consoles set up inside a cube storage unit. Having the controllers mounted on the inside walls, next to the console itself is a neat touch.
Remix of the SNES (PAL & NTSC) and N64 cartridge holder with flip option made by @PawelN_302162 The provided 7 cartridge model was too small for my needs, so I modified it to a 13 cartridge holder. Then I figured: Why not provide…
Details This is a custom model of the armor capsules from the SNES Rockman games. The model is 100% color separated for easy assembly. My print is the default blue but it can also be printed in red/pink from X3 if desired. Some optional…
Remix for a Dual shock 4, a SNES switch controller, and a Slim down facing switch pro controller Print Settings Printer Brand: SeeMeCNC Printer: Artemis 300 ARP Rafts: No Supports: Yes Resolution: .2 Infill: 25% Filament: Generic PLA…
Battery cover for SNES Super Scope. Original had improper dimensions.
A simple stand for covered SNES-Games. Simple but does the job. Greetings!
There are many Pico Nes builds around, so I realise that it might be limited in it's use case but if you do have the version pictured above then you're in luck, as here is a case for it. There is one base plate and three variations of the…
I needed to be able to print out a SNES (Super Nintendo) cartridge board and the associated pins. I couldn't find any accurate measurements online, so I found a broken cartridge opened it up and modeled this from it. The pins on the real…
Fixed the width on this to fit a controller since the original was too narrow. Also made the logo multimaterial capable. Added both the models and the Prusa Slicer project.
Display Stand for the SNES30 or SFC30 controller should work just fine with the Super NT versions of those controllers. Category: Video Games
Simple display stand for your 8BITDO SNES30PRO or SFC30PRO controller. Print in the orientation that it will sit on your desk. No supports needed. Mine was printed at 0.2mm layers with 20% infill in ABS on a FlashForge Creator Pro…
I made this for my ender3v2 but i can clip to any 20x20 extrustion via the clips. This model is intended to be printed on it's side, with 0 top and bottom walls, with about 10% infill, I printed it with honeycomb infill and I think it…
This is a remix of a remix originated by @nolibert's design for the non-North American SNES cartridges then remixed by @jordanhoff for the North American cartridges. After printing off a couple of these I felt they could be better…
Plug for the SNES AV Multiport. Sizes taken from the original spare part.
Display Stand for SNES boxes inside protective clear dustboxes
Depending on your preferences I think this looks pretty sick in black, though a translucent PLA would probably also look good. The attached 3MF file puts the seams on the inside so they don't interfere with the lettering.
PLEASE NOTE: The Super Nintendo is a sensitive piece of vintage electronics. Powering the system with any form of inferior power supply can and will cause issues and shorten the life of the console. USB-PD is not inherently dangerous, but…
I designed these switches to add a custom touch to my clear SNES, but they look really good on a regular SNES, too! Print as shown in the pictures for best results. For the eject button add supports on the build plate only, and for the…
Prints fine without Support with standard settings and a 10% infill
Here is the latest version of the Smash Pad, The SNES edition! It continues the solid, simple, slappable design of the Smash Pad but with a Nintendo inspired look. I admit, it's better with some games, not everything is well suited, an…
This is a back cover for a fake SNES controller. It can be used to create a raspberry pi zero based portable game station. It can be used with any HDMI-TV/Display. If you want to rebuild this GamePi check out my instructable:…
This is a custom printed stand made with PLA Filament. The stand holds the game upright and has the system logo and text printed on the stand. If you like my design, please consider leaving me a tip!
A simple way to convert an old SNES controller into a modern USB-C controller.
This is a vertical stand for the SNES or the Japanese Super Famicom. It is not compatible with the US SNES OnShape Model…
This is the shell for the SNES2VGA dongle project. It allows the transmition of RGBs video signal and stereo audio through a VGA cable. For details, please visit the project GitHub page for parts and instructions:…
It's hard to hold the four tabs on both sides of the SNES controller plug when trying to open it. Using metal tools also damages the tabs a lot. Hence this tool. Try to put all 4 nipples into the holes, squeeze the tool inwards while…
This is an adapter for the Nintendo Twin Famicom expansion port A. It is compatible with NES and SNES controllers, plus the NES Zapper lightgun with the 2P NES port. ===Printing=== Print everything facing up is a good choice. There really…
Here is my design of an expansion to connect NES and SNES controller to the front port of a Nintendo Famicom. It makes the Famicom look like a Countach in the front. Hence the name of this project. The player 2 NES port supports the…
The Nintendo Famicom has been nagging me for almost my whole life with its non-detachable controllers and awkward length of the cord. So here is the solution to scratch that itch. 3D model slicer examples as shown in the pictures for best…
Its a SNES case that i loved i doing by my self its not perfect but its similar.
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore The kit is assembled like the NES Controller Spool kit.…
MiSTer FPGA SNES 2-Player SNAC Adapter Shell with logo Enclosure for a 2-player SNES SNAC adapter for the MiSTer FPGA system. Remix on Mike Frey's design with SNES logo on the side. SNAC adapter design by blue1…
