Counting matching models…
Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…
Snowpeak SP500 / Diana P-Five shoulder stock inspired from crosman 2250 ratcatcher butt stock. Model cut to fit the Prusa MINI I Printed it using PLA with 20% honeycomb infill I used CA glue to join part exept “Left front” wich is bolted…
I needed a mask to scan half-frame film and as these items are getting more and more expensive and rare, I decided to design one myself. The design was based on the original mask 135. The window in the mask is exactly the nominal size of…
Quick holster for the Novritsch SSP5 No retention mechanism, meant only for storing the pistol between games when used as a primary or with a m4 adapter like I am. Of course Novritsch sells these in metal which will hold up better but for…
Look ma, no overhangs! I love the original model, but it was missing a few design elements which make printing a lot easier - so here's my take! All STL files require no supports, and are pre-orientateded. Highly recommend turning on…
Remix of Thor's amazing solution of a Hi Capa M4 Adapter
this is a thred adaptor for the SSP5. gowing from stock 12mm internal threds to 14mm right handed externel threds.
When upgrading a TwoTrees printer to Klipper the original MKS TFT35 display is not compatible (at least I found no way of using it). However, common 3.5" Raspberry Pi touch screens are exactly the same size and work fairly well with…
Mount for the Biqu H2 extruder on the Sapphire Plus (SP5), probably also would work on SP3. -Mounts on two points, to keep nozzle very firmly in place. One mount goes between the hotend fan and heat sink, the other around the extruder and…
Direct drive Phaetus Taichi and EBB CAN 42 mount for Sapphire plus SP-5. I used Sailfin extruders, since they have smallest footprint. Files can be found here . You will need two of them, normal and mirrored. Two pieces of bowden are…
Mjolnir is a hotend assembly for the TwoTrees SP5 / Sapphire Plus, that utilizes Phaetus Rapido, Orbiter 1.5, and a Pinda Probe. It uses the original fans, so no need to buy new ones. Some M3 bolts and heat inserts are needed.
stl, step and f3z are provided
These service rockers attach to the TwoTrees Sapphire Plus to allow you tilt your SP5 back and up off the table without crunching stuff along the back of your printer. This was designed to be used with the panels that TwoTrees sells with…
Just an easy to print model with snap fits for the usb and psu module.
Toolhead support for the Sapphire SP5 V3 printer, necessary for the creation of toolheads. It may contain some millimeters of difference between one support and another. Attached is the editable file for some adjustments.
Scatt optical holder for Walther GSP 500. Fusion360 design file included.
I designed this little power supply case for my DSP5005 in style of a mini laboratory power supply. It works really nice with an old notebook power supply. If you need more space you can print the extension too. Both, the body and the…
This is a Rangerplate for Novritsch SSP5. Print front down and with suports.
base para colocacion de tiras led
Porte bobine pour Twotrees SP5 (V3) pour l'avant gauche (peut être imprimer en miroir pour les autres coin. Spool holder for Twotrees SP5 (V3) for the front left (can be mirrored for the other corners.
Hello everyone, This is my first project for a toolhead for the Sapphire SP5 V3. It's currently in the testing phase and supports the following components: 1 x Btt Eddy Duo - Link 1 x Trianglelabs CHC V6 HD 24V - Link 1 x Sunon Fan…
Made this as a present for a friend who worked on this kinds of microcopes. As I do not have muticolor, i printed the parts individually and glued them together.
This part is a replacement for SP563 pictured below. print with PETG and 100% infill.
✔ Designed specifically for the Two Trees SP5 (300×300 mm bed) ✔ It was designed for the V1.1 version. I’m not sure if it works with other versions. ✔ Ensures repeatable and precise placement of PEI sheet ✔ Simple to install — no printer…
Support Pico MMU for Sapphire (SP5) No required screws
Multiboard MP5/SP5/AP5/etc magazine holder. The prints are a better way to store firearm magazines on a multiboard. They allow easy installation and magazine retention. They will allow verticle removal and placement of magazines. I print…
Support microprobe biqu
sapphire printer with stands / mount / holder for acer tablet other parts → https://www.printables.com/model/214500-sapphire-pro-articulated-display-mount-holder and the nut → https://www.thingiverse.com/thing:2448971
Two Trees SP5 (High Speed upgrade) - Accelerometer + Probe mount ADXL345 accelerometer SN08-N Probe or BTT Eddy ( I couldn't get the Eddy to work ) The hot end covers will need to be removed
Support PICO MMU for sapphire SP5 2x screws M3 2x inserts M3 4mm
I wanted to mount my HDMI5 centrally on the screen area of the SP5 base - I removed the stock screen so there was room for the cables to route through. I made this case large enough to have the screen perfectly central, cover the hole…
SSP5 Thumbrest. Should work with other novritsch pistols with the same mounting system. If you have any suggestions or requests, comment. 5x M3x6mm Countersunk Screws Holsterable version in remixes
Mr Fox was recently gifted an old bakelite telephone with a broken rotary dial and modelled a replacement part.
The outer cut-out of the cap is meant to let the light of the volume-indicator stay visible. The central cutout is required for the remote's IR-receiver to stay uncovered. The print can be done with minimal support (see sliced…
Printed in TPU upside down with some support. Without would be a lot better finish. Works maybe also without supports. Didn't try it out.
Case para display 5'' BTT, fixado no perfil da SP5 V1 e V3 Não é necessario o uso de suportes. 4x M3*4 2x M3*2 6x M4*5 6x Heat Insert M3 5mm (D) x 4mm (L)
Remix of (FC_ACOPLADOR_DISPLAY_PERFIL.stl), to use only 1 screw to move
I built this because the printed top hats were too fragile and flimsy. With aluminum profiles, it's built like a tank. I'm writing this description in a hurry, make sure to open the drawing to check every features and dimensions, I may be…
Cagiva Mito EVO / SP525 / Planet / Raptor 125 – Upper & Lower Chain Sliders 🇩🇪 Deutsch Neu konstruierte Kettenschleifer für verschiedene Cagiva-125-Modelle , vollständig in Autodesk Fusion 360 erstellt. Die Konstruktion basiert auf…
Hello everyone! I designed and built this model completely from scratch using Tinkercad, shape by shape, out of pure passion for unique and bizarre microcars. This is my replica of the legendary Italian 3-wheeler – the Casalini Sulky SP50…
Scatt optical holder for Walther GSP 500. Fusion360 design file included.
Just an easy to print model with snap fits for the usb and psu module.
I needed a mask to scan half-frame film and as these items are getting more and more expensive and rare, I decided to design one myself. The design was based on the original mask 135. The window in the mask is exactly the nominal size of…
This model simply makes the OG body printable in place, and adds ventilation holes. Click HERE to download the new model, which features a completely re-designed leg system, adds features and fixes issues + is now is completely print in…
Hey - everyone, I wanted to share some of the upgrades I've been working on for my TwoTrees SP5. Here's what I've added so far: Upgrades I've made: Mjolnir Direct Drive Hotend Assembly X and Y Stabilizers Flex Bed Guards What's Next? I'm…
