Counting matching models…
This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…
An upper and lower collar for a SpiderBeam 12m mast. v2 holes are enlarged to better fit the carabiners I have.
This adapter allows the bottom tube of a Spiderbeam HD 12m fiberglass mast, which has an outer diameter of 55mm, to be attached to a 42mm steel mast. When you mount two or more of these adapters, they automatically align with the two…
Remix of PET holder attachment to spiderbeam pole (7 mm tip). Printed from PLA with 4 perimeters and 50% gyroid infill.
Spiderbeam ground fixing point for 10 meter spiderbeam fiberglass pole. Three ankerpoints for tent pegs. Bottom of pole (cap) fits into it.
This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…
This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…
--- ENGLISH: --- These disks are used for triple guying of a Spiderbeam antenna mast. The dimensions are for the 12m HD model. They are designed to be threaded on from the top and then sit on the next largest mast element so that it does…
An upper and lower collar for a SpiderBeam 12m mast. v2 holes are enlarged to better fit the carabiners I have.
short : Important notice: If you choose to buy it — thank you so much! https://cults3d.com/en/3d-model/gadget/spiderbeam-12m-mast-ham-radio Your support means a lot. By purchasing this model, you are authorized to: ✅ Print, copy, and…
Original-Seite https://www.wyae.de/hardware/SpiderbeamKlemme/ Ein 10m bzw. 12m SpiderBeam Mast passt FAST in ein DN75 Abwasserrohr - wackelt aber. Mit dem Klemmring steht der Mast bombenfest. Also: 50cm langes DN75 / HT75 Abflussrohr mit…
It's a guying rope collar to support the guying ropes on the 10m fiberglass mast from the Spiderbeam company. The outer diameter of the collar is 110mm, the inner diameter - 53.4mm (this includes some 0.4mm overlap for the bead of…
I recently purchased a SpiderBeam 40" expandable fiberglass pole for use in the field with my ham radio gear. It's a great product but I found a few useful items to print for it. This is a collection of those things. All are printed in…
This is a simple guy plate for the SpiderBeam 7m portable Fiberglass pole. There are 2 versions, TIGHT and LOOSE. The tight one will fit snuggly against the pole, The loose one will be able to freely move when it is on the pole. This guy…
Mast Holder for backpacks. Designed to carry a Spiderbeam 7m fiberglass mast (Inner diameter 55mm).
Calmps for spiderbeam 12 mtr, incl guiding rings and groundplate Mast clamps and anchoring rings for Spiderbeam fiberglass mast 12m Alternative to the mast clamps with rubber and shrink tubing. Particularly suitable for portable use - no…
I made this tool for my Spiderbeam rod. The diameter of the tip is 6,5-6,6mm so I made the hole with 7mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws very smoothly. It will…
I made this hook for my Spiderbeam rod. The diameter of the tip is 6,5-6,6mm so I made the hole with 7mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws very smoothly. It will…
ENGLISH: These disks are used for triple guying of a Spiderbeam antenna mast. The dimensions are for the 12m HD model. They are designed to be threaded on from the top and then sit on the next largest mast element so that it does not go…
A simple Masthead with an eyelet to attach a wire antenna or a rope. Designed to fit on top of the smallest element of a 10m Spiderbeam Mast.
I created custom replacements for the original bottom screw-on cap of the Spiderbeam 10m pole. One model includes only a 24mm washer and a M8 nut so a M8 dowel screw can be inserted into the bottom as a peg. If you feel like it, you can…
A guy wire plate that sits on the 3rd segment of the 10m Spiderbeam telescopic pole. I did not include tensioner plates as I found it way easier to buy ready-made tent strings in the nearest hardware store. Those came in a neon yellow…
