Counting matching models…
I was searching for some coat-hooks to make, but all lacked the personality I was searching for. This hook has two protrusions at slightly different angles. One with a sharper end to catch the collar of a jacket or coat, and the other…
As an example of how you can use my T-Clip system for attaching to Skadis pegboard, I remixed my Squiggle Coat Hook design. Just print the hook and a couple clips that match the type of your Skadis board.
Wheels for my business card embosser, these ones have a wave pattern. Designed to work with: https://makerworld.com/en/models/485772 please download and print the case + gears from above.
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
A fun triblader for recreational throwing. Made in Blender using a non-destructive workflow, so you can easily manipulate some control points in the Blender file to change the shape. The model might be a bit too large for many printers,…
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
A fun pie dish shaped jewellery dish. Printing and Assembly The dish shown in photos was printed at 0.2mm layer heights using a 0.4mm Nozzle. It should print well with larger nozzles, although the crisp edges may become more rounded.…
Cutting edge is 0.4mm. I personally printed with a 5mm raft, 0% infill Made for cutting/stamping polymer clay for jewelry but can be sized larger for cookie cutting. Modeled and created by myself.
This Blender-based sculpt was a playground for animation, creating armatures and muscle sculpting. It is my first work in the world of lizards (and bipedal-scavengers). The original figurine/ model is pose-able and has yet to be printed.…
Monowheel Squig? Preposterous! I Present the Octawheel Squig! "8 IZ BIGGA DAN 1 SO IT MUST BE FASTA" -RobDCinnamonBuns Addition: First painted version ive see: https://www.reddit.com/r/orks/comments/pvinyb/bomb_squig_3d_printed/ EDIT: Due…
Interior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes. The table below provides scaling factors…
This small soap dish has a squiggle border around a decorative hearts pattern on the bottom to keep the soap dry. You can also use it for cotton pads or similar objects which need to dry somewhere. It is not my favorite, I like LR2166…
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Splitted for Prusa i3 MK3S+
A triblader boomerang with fun, squiggly wings; for recreational throwing. Made in Onshape; the document can be found here .
Thanks for supporting my page! This squig was sculpted and refined by hand in Blender as a fun community gift. I reworked the anatomy, rebuilt the tail, improved the face and eye details, sharpened the teeth, and redesigned the armor and…
If you've come this far, you've noticed that the ring is printed as a helical coil shape, and you may or may not be intrigued at that thought. Well it's not. It's a very simple flat four-minute print, heated and wrapped around a mandrel…
SquiggleAide is an assistive writing and drawing aid designed for individuals affected by arthritis, paralysis, reduced motor function, etc. This tool helps users write or draw comfortably while requiring minimal grip strength to hold a…
This is a remix of @Line Arc Line's Squiggle Coat Hook that has been adapted to clip onto 25mm or 1 inch wooden slats instead of using screws. This hook is also 1mm thicker than the original and the upper hook is longer. This hook is…
A bucket in the fashion of the “Squiggly Purge” purge line macro. The latest version of the Macro can be found on GitHub .
Hi, I introduce you to my new design, a Squiggle Toothbrush Holder
A squiggly line test print for 3d printers.
I took an already great model by Line Arc Line that I have used extensively throughout my home and welding shop, and made it a single version as a great way to hang and display my welding helmets. I used Matter 3D Matte Black PLA at…
TBH I don't know what should I call this pattern. Print it upside down if you want. Should work both ways
Squiggly wall art formed by summing three rotating vectors. Four ‘preset’ STLs are included. You can edit the parameters or randomise them in the OpenSCAD customiser (which has details of how to do so). To access the presets in OpenSCAD,…
Printed versions available for sale on Etsy
A printable, magnetically mounting version of "squiggles n' dots" rank badge. Print in orientation provided, insert 6mm magnets in the holes (press fit), paint and enjoy.
A printable, magnetically mounting version of "squiggles n' dots" rank badge. Print in orientation provided, insert 6mm magnets in the holes (press fit), paint and enjoy.
This thing holds all my soldering items (and fits a little spool of solder in the first “pocket”) but you can also use it for pens and whatnot! This is a longer print, try with .2mm or .15mm for better results. doesn't require supports :)…
The squiggle plant pot, perfect for smaller plants for around the house and office. Designed with Rhino 3D 2 Separate Parts Material Usage: 160 g Material: Matte PLA Build Adhesion: Skirt Dimensions Base: 136 x 136 x 115 mm Drainage Tray:…
Squiggles vs. The Mysterious Sock 🐍🧦 Deep in the shadows under the bed, Squiggles spotted his greatest nemesis yet: the Mysterious Sock. It lay there, motionless, but Squiggles knew better. This wasn’t just any sock – it was a legendary…
A squiggly ring designed in OpenSCAD. The included stl has 19mm inner diameter, but can be scaled for other finger sizes. About 40 minutes to print in PLA at 0.08mm layer height.
🎅 Merry Christmas ! 🎅 Easy to print : just print it in Vase mode / Spiral vase. Printed in PETG / Nozzle 0.4 mm / Height 0.2 mm Demo file with this settings. Like it ? ❤ Check my Christmas collection here :…
SquiggleAide is an assistive writing and drawing aid designed for individuals affected by arthritis, paralysis, reduced motor function, etc. This tool helps users write or draw comfortably while requiring minimal grip strength to hold a…
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Print yourself a fully functional guitar speaker cabinet in the style of a Squig, as seen on the Once in a Six Side Youtube Channel. Massive thanks to Isaac for the sculpt, and GW for the inspiration. Merry Christmas and happy new year…
This is a simple tablet stand I made for my iPad. Holds the device at a 60 degree angle. I included two versions, one without the hexagonal cutouts. I also included the .step files in case you want to modify it to fit your own device.…
this is a squiggly spiral vase. Scale it to the size you want. and print it in vase mode.
I wanted to use this good looking hook designed by Line Arc Line with double sided tape without seeing the holes, so I simply removed the holes. If someone wants a little recess on the back of the hook to accommodate thicker tape, just…
I was delighted to find here the Torus Toy model by @lubosz We used to have a much smaller version many years ago and i decided to try and remix it and build a larger and more complicated version. The result is fantastic. It prints in…
Phone stand for your desk, printed without supports. Features cutout for cable routing and charging your device! Perfect for desktop organization and cable management!
There is 3 models, one with all diffrent textures, one with just weaves and one with just squiggles.
