Counting matching models…
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
Pull out the original holder form the rubber an screw it together with my holder. You additional need 2x M4 Locknuts and 2x M4x15 screw and also a cutted off M5x17mm screw. Print with 100% infill.
My version of a lowcost snowman. You dont need alot of material, the snowman is printed in vasemode. The other parts are standart prints. The snowman is 24cm tall. For the best effect print the snowman transparent but you can choose what…
UPDATE ADD model ToolHeadCover_AD5X_V1.1 1.Fan mounting without tension 2.The legs for mounting the fan and the printed circuit board are reinforced Improved nozzle airflow. This model is slightly longer than the standard one. The…
The new phone went to the happy hunting grounds, and I needed to insert a SIM card into the old to make it a bit stuck: D Resolution: 0,1 mm, Infill: 100%
Summary King 95mm Queen 85mm Elephant 70mm Horse 60mm Fortress 55mm Pawn 50mm Only use Support while riding a Horse.
Wandhalterung für den Standard Ladeziegel der Volkswagengruppe. Die 2 Löcher in den Seitlichen Wänden haben einen Durchmesser von 8,5mm, um ein M10 Gewinde mit 1,5mm Steigung zu schneiden.
This magazine pouch insert is used to convert soft M4 or AR magazine pouches into double MP7 magazine pouches. The design allows the magazines to be drawn quickly and, above all, stowed away again quickly and easily. The insert is…
Da die Puffer meiner Toilette leider etwas den Geist aufgegeben haben und ich mir TPU zum testen gekauft habe, war das mein erster Druck nach den Testdrucken. TPU Puffer für den Sitz, siehe analog Amazon.…
Cap for standart 7mm hex pencils
In PLA+/ ASA gedruckt mit 3 Outlines und 35% infill Die Löcher sind 3,5mm für M3 Einschmeltzmuttern Passt für 20mm Standart Servos
I've printed it with ABS. No Supports needed. Resolution: 0.22 Infill: 50%. - If you enjoy my 3D models and want to support my work, feel free to donate via PayPal . Every contribution helps me create more content. Thank you for your…
Storage tray for standart DIP IC chips with slidng cover and magnet lock DIP IC Organizer
Stanly Becher Fahrrad Halter 65mm Standard Bohrung Abstand
Da die Puffer meiner Toilette leider etwas den Geist aufgegeben haben und ich mir TPU zum testen gekauft habe, war das mein erster Druck nach den Testdrucken. TPU Puffer für den Deckel. siehe analog Amazon.…
This is a perfect CHESSBOARD for you and your friends. It has separated squares for better painting. On the bottom of the board you have a space for a heavy material to weight your board. It is a FREE model. IF YOU WANNA SUPPORT MY WORK…
This is a ground glass stopper for the standard ground glass size 29/32 mm. It has a rounded head and a pin from which condensate can drip back. Please check the material beforehand to ensure it is suitable for the intended use. Depending…
These tile spacers have all the standard sizes(1mm,1.5mm,2mm,2.5mm,3mm,4mm,5mm,6mm,8mm,10mm).I found a multi pack on a construction site and mesured it.The file contains all the sizes on different plates and each plate has a + and a…
EN: Gen2 closed base, small and standard from single to triple remix closed base for the Steel Sheet Holder added in small. Big thanks to the creator of Gen2 for this excellent system @Jerrari GEN2 Modular Storage System…
I’ve created a CAP for the filament holder for XL and CoreOne+ printers for the competition. multi-material printing 3MF file only: the cover features the PRUSA logo and infill patterns (the STL file is clean). Simply slide the printed…
English, Deutsch Sorry for my bad english. Edit: I added a base vor Arduino joystick Modules. Joystick for disabled people using standart Playstation, XBOX or Switch (Pro Controller, not Joycons) Sticks. A version for Arduino Stick…
PŘÍSLOŠENSTVÍ K VLÁČKŮM CHUGGINGTON DIE CAST KOLEJE
Direkter Anschluß für kleinen Transportraum mit graden Abgang
En: Stand designed for a standard 58.5mm, 3-ear portafilter. Anyone in need can download and print it. Enjoy your coffee! Tr : Standart 58,5mm ve 3 kulaklı portafiltre için tasarladığım stand. İhtiyacı olan indirip yazdırabilir. Keyifli…
feel free to remix it to put the mounting hole as your preference, adjusting the ratio full protection/clear fov
Ein einfacher Schaltknauf mit den Gangangaben oben auf dem Knauf für den IHC D 214 Standart Traktor, Bei bedarf kann eine M10 Hülse eingesetzt werden. Mal was anderes als der Original Pilz Schaltknauf.
M3-M16 Gewindebohrer Halterung für Standard Lochwände
You will need 6 m3 screws 20 mm long. No support needed
Ein variabel zu befestigender Griff, um lange Tage mit der Legeflinte angenehmer zu machen! Sehr stabil entworfen, es werden zum verbinden von Griff und Schale noch vier M6 x 35mm Sechskant Schrauben benötigt. Zum drucken die Schale auf…
Stanly Becher Fahrrad Halter 65mm Standard Bohrung Abstand
Ein variabel zu befestigender Griff, um lange Tage mit der Legeflinte angenehmer zu machen! Sehr stabil entworfen, es werden zum verbinden von Griff und Schale noch vier M6 x 35mm Sechskant Schrauben benötigt. Zum drucken die Schale auf…
This is a ground glass stopper for the standard ground glass size 29/32 mm. It has a rounded head and a pin from which condensate can drip back. Please check the material beforehand to ensure it is suitable for the intended use. Depending…
Ein einfacher Schaltknauf mit den Gangangaben oben auf dem Knauf für den IHC D 214 Standart Traktor, Bei bedarf kann eine M10 Hülse eingesetzt werden. Mal was anderes als der Original Pilz Schaltknauf.
I've printed it with ABS. No Supports needed. Resolution: 0.22 Infill: 50%. - If you enjoy my 3D models and want to support my work, feel free to donate via PayPal . Every contribution helps me create more content. Thank you for your…
Mounting piece for the end stop that goes with this model: https://www.printables.com/model/301695-ender-3-s1-y-axis-silent-stepper-motor-mount Attached with a couple of drops of cyanoacrylate glue.
This is a simple wall mounted holder, or rack, specifically intended to hold exactly one issue of Standart Magazine. You can mount it to a wall or piece of furniture using three #4 pan head screws. You can also mount it with something…
A versatile, practical hook designed to fit European standard shelf racks and adaptable for US shelf rack systems. For US shelves, users should verify measurements or adjust the model as needed to ensure a secure fit. Fits EU shelf rack…
A versatile, practical hook designed to fit European standard shelf racks for hanging jackets and adaptable for US shelf rack systems. For US shelves, users should verify measurements or adjust the model as needed to ensure a secure fit.…
En: Stand designed for a standard 58.5mm, 3-ear portafilter. Anyone in need can download and print it. Enjoy your coffee! Tr : Standart 58,5mm ve 3 kulaklı portafiltre için tasarladığım stand. İhtiyacı olan indirip yazdırabilir. Keyifli…
Recently I took my old laptop apart and found use of the internal webcam --> If hooked up correctly those standardized cameras act like a normal USB webcam and can also be used within octoprint. The next step was to make a proper mount…
Thx to the original author ! Great idea. I've changed a little: can be used for almost any bag (not only tea and coffee) made the standart thread of 5L water bottle for standart caps 50 mm no need cap printing more liteweigt more strong…
prints around 20 min. with %10 infill and infill line distance: 4
you must Drill 1 hole in de Card-ritsch but then you can use Big spool filantnts witch the Filament Sensor
Bearing adapters for standart creality spool holder tube (30 MM od berarings fit)
Customized version of http://www.thingiverse.com/thing:1571860 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=1571860 Instructions Using the following options: Nozzle_Length = 60 Base_Diameter = 34.6…
