Counting matching models…
This is a highly detailed sculpt of the Hydralisk from StarCraft 2 HOTS. The base model was ripped from the game and the high res detail was manually resculpted by me, based on the character normal and albedo maps. the post was matched to…
You wanna piece of me boy? :P Use body and arm files for print. If you need full model, use full file. And take a look my other models :P All the 3D models of NemoMK2・Cults (cults3d.com)
Remix from: https://www.thingiverse.com/thing:4600435 Same seige tank, but you can move the turret now. Supports required. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Infill: 20% Category: Vehicles
Ultralisk from the game Starcraft 2 from Blizzard. Printed on Ultimaker 2, 0.1mm layer, 20% infill. Support with meshmixer. Category: Creatures
Terran Barracks from the game Starcraft 2 from Blizzard. Printed with PLA, 0.1mm layer and 20% infill. Category: Buildings & Structures
Here's my contribution to all the quarantine creativity: an approximately life-sized C-20A Rifle used by the Starcraft character Nova. Originally I ripped it from an in-game asset, and then added detail from there based off of numerous…
StarCraft_Mutalisk_Fanart by Binhou. https://sketchfab.com/models/c6f44d4309cd46379e1eadd9d79453d5?ref=related To make Binhou's sculpture more printable I have thickened the wing membrane and split the model down the middle. The two…
Orbital command from the game Starcraft 2 from Blizzard. Printed with PLA, 0.1mm layer and 20% infill. Category: Buildings & Structures
This is a interpretation of the Starcraft 1 Siege tank from memory. Though there are some differences, I believe it is recognizable. Category: Vehicles
This is the supply depot from starcraft 2! of course I added my own little bits too it to make it my own. the top half requires no support, but the bottom half needs a bit of support (dont put support on the ladders, they print fine…
Planetary fortress from the game Starcraft 2 from Blizzard. Printed with PLA, 0.1mm layer and 20% infill. Category: Buildings & Structures
Printed with support from Meshmixer on an ultimaker2. 0.1mm layer, 20% infill Category: Creatures
Starcraft keychain I designed from the protoss logo for a co worker. Enjoy! V1 is the original V2 has a thicker wall where the keyring goes, if scaled down V1 can become too thin.
A Siege tank created from memory. Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: .12 Infill: 20% Post-Printing Sanding is optional How I Designed This Fusion 360 Category:…
Barracks from starcraft 1. Category: Buildings & Structures
Simple tokens to track activations in the new Starcraft tabletop game The tokens are double sided and requires an MMU or equivalent These are 28mm, just picked a size since I can't seem to find what Archon actually will use when the game…
Button that I made in thinkercad for the button contest.
Starcraft-inspired Christmas tree ornaments
A firebat from starcraft 2. Made a base to go with it. Strictly for personal use. All rights belong to Blizzard Entertainment. Not for sale or to be reproduced.
Simple model of a starcraft 1 dropship Supports required. Print nose down for best results. Now compatible with Siege tank carrying. Compatible tank https://www.printables.com/model/317302-siege-tank-tank-mode-from-starcraft-1
Update 1: Added box to transport miniatures and additional token box version with magnet holes to connect the token box to the miniatures box. The lid works for any version of the token box. 16x 8x3mm magnets are needed to connect the…
Check out my youtube channel for 3D printing and 3D design videos! https://www.youtube.com/channel/UCuHuFfEPBPNv9AmoDYmXFiQ I enjoy doing these kind of designs, Please subscribe to my thingiverse to stay updated on my new designs! I also…
Simple model of a starcraft 1 dropship Supports required
A terran symbol keychain, easy to print. I hope you like it!
Button that I made in thinkercad for the button contest.
I made a desktop storage box. It's StarcraftⅡ Terran Factory Styling. very interesting. Hope you like it. Wish you happiness! operating instructions: Printing Instructions: You can refer to the supports in the gcode file. This model was…
Button that I made in thinkercad for the button contest.
I took the decals from Wings of Liberty, Heart of the Swarm and Legacy of the Void, then filled them with triangles in TinkerCAD. Thus I now have a fairly close approximation of the decals. To be mounted with double-sided tape. I…
The case was printed with TPU and the Terran sign was printed with PLA (I used 0,3 mm nozzle). The PLA part is just 0,2 mm thick, so it doesn't feel any stiffer than the rest of the print. I did this by creating separate stl files for…
I printed these 7 of these card boxes for our copy of the StarCraft Board Game with the Brood War expansion. OpenScad Parameters l: 100.0 h: 60 Faction Boxes Inside Box Dimensions: [20, 5, 16] Other Boxes: Inside Box Dimensions: [24, 17,…
Just a simple Ring with the Logos of Starcraft. 20mm inner diameter. needs quite good print resolution and slow printing.
This is a Starcraft Themed Outer Ring for my cryptex Combination Safe 00 . Created using Outer Ring Customizer (OpenScad) Category: Containers
The three StarCraft II race splashes, seamlessly incorporated into the design of a 120mm PC fan shroud. A classy addition to your PC, demonstrating your love for StarCraft. I included holes for mounting to case fans, as well as slots for…
It's simple template markin 3" of space from objective template in Starcraft TMG.
Traced images of the Purifier and Nerazim decals. I unfortunately could not get a good one of the Tal'Darim, and it would probably be too delicate anyway. Both decals only have one part. Print in Green and White/Gold for Nerazim and…
This is a model I made for my families pop-up trailer (Starcraft Galaxy 6) We gutted the whole thing and built several more beds (large family) and during one of our camping trips we got very heavy rain and unfortunately we hadn't really…
This is a Molle tag of the terran symbol from starcraft 2
I needed a way to organize all of my blades and accessories for my Starcraft Solo die cutting machine so I quickly threw one together in Tinkercad. It will probably work for holding the blades for Cricut or Silhouette machines as well.
it should be light enough to mount with just some tape. feel free to modify the thickness how you like. i also included a version with a hole at the to for mounting with a string or screw.
Set of Starcraft Keychains. Design Highlights Reinforced Loop: Extra-thick attachment point to ensure the keychain survives daily wear and tear on your keys, clothes or gear Low Material Cost: Each keychain uses approximately 3-8g of…
With the help of AI it came out as a greate Model. i like to use it.
Slots for tracking active unit upgrades. Fits small cards in stadard 41x63mm sleeves. Cards for print here: https://drive.google.com/drive/folders/1q9dwxQscYHsLaLiRMN4rqaH No supports needed, just a quick color change for the unit name…
Simple tokens to track activations in the new Starcraft tabletop game The tokens are double sided and requires an MMU or equivalent These are 28mm, just picked a size since I can't seem to find what Archon actually will use when the game…
What comes with the model price: Hyperion a model of Behemoth-class battlecruiser, redesigned for easy FDM print, but still there are planty of details Two Hyperion Styles , the verion with hole for stand and other one without hole Terran…
3D model description As a big fan of the original Blizzard game, I bought the StarCraft board game many years ago. While everything was fun, the original cardboard box was not ideal. Inside the box were tokens, cards, and plastic figures…
![Dropship (Starcraft 1) [Carries tanks]](https://media.printables.com/media/prints/319398/images/2762714_e7334efe-91b4-4834-b95c-5f562f8c6c78/pxl_20221118_143302557.jpg)
