Counting matching models…
Updates 09-12-2023: Fixed several basin parameters & updated to Blender 4.0 . Updated Files - Parametric Seed Starter.blend 18-07-2023: Added a mid-section to the air-pruning strips in the cups. Updated Files - SeedStarter_0.4n -…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. I've got a few air pruning trays…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
A printable replacement part for your lawn mower with a pull-start cord. Unfortunately, the original broke, so I designed this replacement part. Printed with PLA, it works great. However, PETG is recommended for its UV resistance. Have…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
Seedstarter, which uses a cotton pad (makeup removal pad , cotton swab) Inner diameter is 60mm.
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Turn the underside of any table into storage. Screw in a rail, slide in a drawer. MODULITH rails mount under a desk, shelf or enclosure table with a few wood screws. Cases slide on and QuickLock holds them, so you can swap or rearrange…
No supports needed. I recommend 0.15 layer hight and 3 shells. Fusion 360 file included! Check out a video about this case by Matt Reviews It . Order a printed case from AltaVox and support Meshtastic through Open Collective
This is a simple mechanical start gate for HotWheels / Diecast 1/64 cars. Designed by PlayRobotics. This gate is really simple to print and assemble. In addition to the printed parts you will only need two M3 screws (20mm & 12mm long).…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
GEN2 240 TABLETOP STARTER KIT The easiest way to start the GEN2 QuickLock Modular System on any surface. 240 is the deep size (about 226 mm inside), sized for power tools, spray cans and tall bottles. GEN2 was originally built to mount…
GEN2 115 TABLETOP STARTER KIT The easiest way to start the GEN2 QuickLock Modular System on any surface. 115 is the MEDIUM depth (about 101 mm inside), sized for pens, cables, tape, small parts and tins. GEN2 was originally built to mount…
Self-Watering Seedling Tray for 7x7 cm Pots This tray is designed to perfectly fit 6 seedling pots (7 × 7 cm) and enables an easy and efficient bottom-watering system for your plants. 💧 How it works Simply fill the tray with water and…
See below the .cfg attached. ;) on to the Other Files section 🛠 Sovol SV08 Klipper Macros: Tap Z-Offset, Nozzle Cleaning & Adaptive Purge Thanks to Vlad for the brilliant firmware that enables the BTT Eddy sensor to support tap-style…
Enjoy cube drafting? Or maybe Jumpstart? Print some of these! Very low filament utilization (~20 g per inner/outer pair), fits 15+ double sleeved cards, or 21+ single sleeved cards easily. I printed with a 0.6 nozzle in PLA. If you're…
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Modular System is a 3D printable storage solution…
This is the model of the Starting Player Token used in the boardgame Lying Pirates! Dive into the swashbuckling world of 'Lying Pirates' with this exclusive 3D printable Starting Player Token coin, featuring the iconic skull and crossed…
This is an insert / organizer for Unconscious Mind in the Kickstarter Collector’s Edition box with all the released expansions to date (November 2024). It supports premium sleeves, vertical storage, has no lid lift, and was designed to…
Important: It is recommended to use a battery booster over jumper cables. If you are unsure about participating in jumpstarting with your vehicle, consult a professional for help instead. In an emergency, use jumpstarting vehicles at your…
Pull Start Spinning Top Launcher This is a mechanically powered spinning top with a rack and gear launcher. The top is accelerated by pulling the rack, which spins the gear inside the launcher and gives the top a fast and smooth start.…
DO NOT COPY AND PASTE THIS INTO YOUR PRINTER, IT IS FOR REFERENCE ONLY!!! SERIOUSLY, I TAKE NO RESPONSIBILITY FOR DAMAGE TO YOUR PRINTER OR FOR A POTENTIAL ROBOT UPRISING! I asked ChatGPT/Bing/Sydney to comment all of the start gcode from…
I needed a boxes for MTG Jumpstart packs to be able to replay them easily and a way to store them. The base box has 3 rows that can contain 14 jumpstart boxes. Each jumpstart box can contain 21-22 single sleeved cards. The base can also…
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…
Deep within the heart of the mountains, amidst the echoing caverns and glittering veins of precious gems, stands Durin Stoneheart , the Mountain Forger. With features etched by the passage of time and the weight of creation, Durin stands…
UPDATE: This is now an outdated model. I have created a new one that is much easier to print and also has a bottom tray to keep things neat and tidy. https://www.printables.com/model/639430-seed-starting-set-v2 These are a sturdy and…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This Gcode is the original G Code but in this one it scans for the bed QR Code Then it does a Home Check so that if it doesn't see the QR Code it PAUSES asking for BED or Continue, IF you add the plate IT NOW SCANS that Plate and then…
Bambu Lab - Faster Start - reduce waiting time | G-code trick Bambu's 'Machine start G-code' preheats the headbed and wait for it to be heaten until the printer moves on with preparations. This change in the machines G-code will move the…
This is a replacement pullstart housing & cord spool for a 1/10 .18 or larger nitro engine with a 12mm hex. You can view the Fusion360 project here... https://a360.co/3bgZUxZ Obj, skp and f3d files included. EDITS 30/03/18 Has anyone…
I love Nestea's Steam Deck stand design for the Anker hub, so I decided to remix it to fit my StarTech hub, which is too thick to fit into the original design and has a unique shape. The StarTech hub model number is DKT30CSDHPD . There is…
Nothing overly advanced, but I wanted something that would hold my AED on the wall. The letters are not only separate bodies, but inset into the wall of the hanger. As such, you do not have to print the letters out, but can simply paint…
Gen 1 Starter Pokemon Coaster Set Designs May Require ‘Print Thin Walls’ On Due To Intricate Details. Please Share Yours Makes And Remixes Enjoy Printing! If You Message Me With Ideas I Can Get Them Done And Uploaded. MANY THANKS.
I designed these gravestones to be printed flat, requiring minimal color swaps and allowing easy customization. There are two styles of bases for you to choose depending on your style and how big and sturdy you want. They slide onto the…
Bambu's machine start G-code has the following right in the beginning (lines 23-26): ;===== heatbed preheat ==================== M1002 gcode_claim_action : 2 M140 S[bed_temperature_initial_layer_single] ;set bed temp M190…
A small box for the resistors and diodes of the arduino starter kit. One variant with values and one without.
Simplified design for easier printing. Slightly adjustable. Directs tool lead up without the use of a zip tie. Print Notes: If you plan to print high temp filaments, print the component in a high temp filament.
Star trek stand to hold 1/4"" acrylic in a 1/2" aluminum c channel extrusion. Print 2 of each file and glue together to create each side. Leave bare or finish to suit Parts required: 1/2" aluminum c channel extrusion cut to length 1/8"…
I printed mine in PETG with 0.2 layers 4 layers and 25% gyro infill.
Needed a way to hold some of these things on the underside of my desk so designed these. I used drywall screws to mount to bottom (as I do for most things). I'm sure these will only fit the exact ones I have here but still worth your time…
Star Trek uses symbols to express many things, but none capture the eye or the imagination quite like delta. Print parameters Nozzle: 0,4 Supports: NO Material: PLA, PETG Infill: 40% Wall Count: 3 >> If you want to buy me a coffee, you…
I had to replace the pull start handle of my grass trimmer, but can be use everywhere such handle is needed. It is modelled to use the minimum amount of support. Just lay it down on a face, use tree support for the ceiling of the holes at…
Gen 2 Starter Pokemon Coaster Set Designs May Require ‘Print Thin Walls’ On Due To Intricate Details. Please Share Yours Makes And Remixes Enjoy Printing! If You Message Me With Ideas I Can Get Them Done And Uploaded. MANY THANKS.
This is an insert for Wondrous Creatures , specifically designed for the retail version or the base Kickstarter pledge (no expansions or deluxe tokens). Sleeved cards will not fit . The deck holder, egg tray, and energy/net tray are…
Gamer’s Grimoire This design is a set of modules capable of being mixed and matched to create your perfect tabletop setup. Each module is designed to be swappable so users can upgrade to newly released modules or modify as desired without…
Originally designed for a Startech.com 6U wall mount server rack. But should work with their entire line of wall mount server rack products. It's a two piece design. You can installed the CAT 6 terminated or unterminated it doesn't…
I needed a support for my 7.1 Audio sound card in my virtual pinball. I could not find one so I made that version.
This Start G-code is for PrusaSlicer v2.8.0, further version needs to be inspected and ultimately modified if necessary. Problem: I was a little upset after a 10+ hours print to see a white line on the "visible" surfaces of the final…
NOTE: You will need a printer that can print at least 248mm x 216mm in the X/Y directions to successfully make this insert. Version 1.1 (2025-09-26) Based on feedback, I have redesigned the insert to move the game board from the bottom of…
In simple terms: The following G-code has been modified to improve the startup times of the printer, with the addition of conditions that allow the printer to understand when and if it is better to heat the chamber, and open or keep…
CLICK HERE TO DOWNLOAD LATEST RELEASE FROM MY GITHUB The purge line from the A1 has been spliced into the P1S start GCode. The purge line changes location so it is (almost) always placed beside the print, and is much smaller than the…
Pull-start handle for 2-stroke 47cc/49cc engine. Use M3 nuts and bolts to assemble it. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.3mm Infill: 50% Filament: gembird PLA+ black Notes: For…
This is a case for the rak wismesh 1w booster kit. It houses the RAK3401, RAK13302, and RAK19007 boards. It has spots for a GPS antenna for an optional RAK12501. It has spots to put the BLE and the LORA antennas that come with the kit. It…
This 3mm wider case is a remix from the genious original “RAK Meshtastic Starter Kit - No Additional Hardware Case” from pdxlocs. I also used two other remixes here for the frame and the front and back cover. The frame can hold the GPS…
Le fichier mf suffit Couches 20 mm Remplissage 100% mais moins doit pouvoir fonctionner Comptez 5 heures , oui c'est long le TPU
In the Arduino Starter Kit a base plate (yellow plastic piece in my case) is included to mount the Arduino and the bread board on. But there are no spacers included so that the contacts of the Arduino are touching the plate when it is…
Thermostat cover for an Espar D2 EasyStart Select controller. https://www.butlertechnik.com/eberspacher-easystart-select-controller-airtronic-or-hydronic-heater-221000341300-p926 This object was made in Tinkercad. Edit it online…
Story time: My significant other is a rather large fan of Creature Comforts and was bummed that they missed out on the Kickstarter edition of the game and its wooden tokens. I bought them the deluxe token upgrade pack as a present,…
This model is designed as a real-world Z-seam stress test , not a “pretty” calibration print. It intentionally contains: Many small holes (short perimeters) Sharp inner and outer corners Thin walls and frequent direction changes Constant…
I created a rewritable label for seedstarters with a cover. It fits perfectly into the parkside seedstarter. 0,2 layer height Infill: 15%
The Ultimate Tomato Seedling System. Get your tomato season started right with this optimized 3D-printed starter kit. Designed specifically for young tomato plants, this system focuses on deep root development and easy maintenance.…
This is a tool I designed to help you start a bayonet style CHT adapter. It has a 1/4 inch drive attachment on the bottom and a place to work it with your fingers. This is not meant to allow you to torque it, just start it. Print it with…
Cable organizer for the side of a StarTech 12u Wall Mount 19" rack. I guess it work also for other StarTech open frame racks. You need: M3x10 countersunk screw M3 nut Print settings: PETG PrusaSlicer print profile “0.25mm STRUCTURAL” 15%…
Vertical version of the bench for Arduino MEGA2560 (Elegoo R3 Starter kit) with wires case (right fixed extension)
I created this model because while the KVM was on the desk: The weight of the DVI cables made it pop up in the front. The cables from behind the desk were unsightly. The holes on the side allow for mounting using the built in rack mounts…
Customized version of http://www.thingiverse.com/thing:2120898 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2120898 Instructions Using the following options: minimum_box_length = 0 compartment_width =…
Lets you replace the 80 mm x 20 mm stock fan on with a common 80 mm x 25 mm size upgraded one on the StarTech HSB4SATSASBA “4 Bay Aluminum Trayless Hot Swap Mobile Rack Backplane”. Bill of Materials 4x M3 x 30 mm screws 4x M3 x 5 mm x 5…
One could use this die to pick a topic for a story or any other writing task in school. You could either use it with a bigger group to show how one prompt could create different outcomes, or to help a pupil with their creative process.…
This was made for a need to have 2,5" SSD's mounted somehow in retro computers. It will fit the Startech ide2sat2 adapter and allow for toolless 2,5" drive mount. The 2,5" drive can be screwed down from the bottom. The optional part is…
Hello I created the 4 StarTrek Badges for a friend and thought I will share them here as well. The file contains all 4, just delete the ones you don't want. prnited in PLA with the BambuLab AMS let me know what you think and have fun…
One could use this die to pick a genre for a story or any other writing task in school. You could either use it with a bigger group to show how one prompt could create different outcomes, or to help a pupil with their creative process.…
These are designed to tamp down the soil in square seed starting trays. 2026-02-08: Added 1.5 inch round tamper for starting seeds using cardboard toilet paper or paper towel tubes.
krytka pod tlacitko start cover for button start
A client wanted an HDMI switch hidden under their conference table but wanted to be able to access the HDMI Select button from the top of the table via a push button because they did not want to rely on a tiny cheaply made remote control…
Just good looking pots for germinating seeds in paper rolls. Modular design that can be chained to create clusters of plant starters, just slide the wedge of one pot into the groove of another. I wanted containers that were pretty, with…
An ergonomic pull start handle for replacing or upgrading recoil starter handles on small engine equipment. It features a textured grip and an internal channel for standard pull cords or starter ropes.
This is a case designed to fit the Texas Instruments AM69 Starter Kit, a 120mm Fan and a PCIe x8 Riser. 120mm PC Fan - You'll need to solder your own wire harness to replace the Fan. PCIe Riser Used -…
Description HP Otto Starter Kit , transformed into a Oni mask design. This design merges the modular engineering of the HP Otto Starter Kit with the traditional aesthetics of samurai folklore, turning an educational robot into a…
I realised that I don't have enough space to mount power strip in front of the rack, instead I decided to mount it on the side. Parts: M3 Heat inserts M3 bolts Screws for rack mounting Installation process: Unscrew 4 bolts on the side,…
🥑 Avocado Pit Starter | 2-Piece Universal Propagator Growing an avocado tree from a seed, but the pit keeps sinking or slipping? The Avocado Pit Starter solves that! Designed with a modular two-piece system, this planter features…
Just a very basic sturdy VESA mount for the Startech ST7300U3M USB hub in 70mm and 100mm sizes. I recommend at least 5% infill and print with the countersinks for the screws facing upward. Uses standard M3 pan head screws for the hub…
An adapter to put in place on the hinge to prevent it from tipping over when mounting a monitor, such as a 49" ultrawide, which is heavier than the specs allow for. You can still tilt the screen left and right, but not up and down. I've…
Simple stands to lift a StarTech network rack up off the floor.
I wanted to add a USB hub to my Prusa MK3s. The StarTech ST4200USBM is an industrial 4-port USB hub with a DC power connector for 7-24VDC and a mounting flange with several holes. I made this mounting bracket to take advantage of the…
Modular portable work cases, abbreviated as MORS, are designed to improve the electronics development experience, for example for Arduino boards and their accessories. What's not a great gift for both beginners and more experienced…
I could not find any stands for my USB switch, so I designed one in Blender. This stand is intended for the StarTech.com 4 to 4 USB 3.0 Peripheral Sharing Switch (model number HBS304A24A ). It raises the USB switch at a 45 degree angle,…
These are replacement reset and interrupt buttons for the Apple Macintosh Quadra 950.
This is a model I made to test problems with retraction I'm having on my MK3S+ The seam usually starts on the inside corner, and under-extrusion can be seen here when the wipe feature is enabled on my printer. It's worst with PETG but I…
the old pullstarter broke so I did a new one
kick start shaft to a Puch Maxi E50 Engine Part number: 349.2.13.332.0 Module: 2.75mm Putch Circle Diameter: 82.5mm Pressure angle: 20deg Number of teeth: 30 Shaft nominal diameter: 16mm Shaft model diameter: 15.85mm The part is modelled…
This LiPo battery tray is designed for Thunder Tiger–style starter boxes and replaces the original dual NiMH battery holders, allowing you to upgrade to modern LiPo packs without any permanent modifications. The tray uses the original…
These plates are specifically designed for the TLR 8IGHT X and allow the chassis to be used with a Thunder Tiger–style starter box, ensuring proper alignment and stable engine starting. The plates help to: Correctly position the chassis…
Pull start handle for small engines that I designed to be printed in the strongest orientation for the intended use case without supports. It's probably better to print it in PETG, but I used PLA no problem.
Overview This customizable 3D printable seed starter helps solve fit and layout problems in seed starting by letting you adjust pod size, pod spacing, row and column count, and overall tray configuration. Generate a seed tray that matches…
A baseplate for the OSS-H shifter to fit the EG-STARTS encoders commonly found on Amazon, Aliexpress etc. This encoder has a USB-B connector that needs to be exposed to allow removal of the cable. The baseplate fits both the original and…
Mount your Startech USB Hub securely! Mounts Startech ST4202USB USB 2.0 Hub, giving you open access to cabling on both sides (DC power barrel, USB-B & the four USB ports on the hub). Can screw right into a rack like…
This is an insert / organizer for Unconscious Mind in the Kickstarter Collector’s Edition box with all the released expansions to date (November 2024). It supports premium sleeves, vertical storage, has no lid lift, and was designed to…
It worked! I designed this thinking that it would be a way to recycle toilet paper rolls and I am always looking for things to start seeds in in the spring. It took a couple of tries to make sure that it held enough moisture and could…
Designed to take the slightly thicker tokens that some copies of the game have. This means that the 6 token columns are taller, and so are the spare token slots underneath the share tokens. May fit less well in some boxes, due to height.
GEN2 185 TABLETOP STARTER KIT The easiest way to start the GEN2 QuickLock Modular System on any surface. 185 is the STANDARD depth (about 171 mm inside), sized for everyday storage. GEN2 was originally built to mount under a desk · this…
