Counting matching models…
If you love shopping at Costco, you'll appreciate this 3D-printed shopping cart tray. It's designed to securely clip onto the newer Costco shopping carts (cart measurements taken in northern California) and give you a space to set down…
Based on a “dog poop bag" holder, but supersize! I recommend printing without supports (supports are part of the model) and with at least 3 perimeters. There are holes on the inside for you to mark the wall with where to put the screws…
You: “got the stl?” Me: “Yes, jump to the end.” I've been trying to get a good handle on a parametric design models. I think I got it under control now. Always helps to have a good problem to solve. Simply put, edit the input parameters…
Well, The dividers are overkill at 1.2mm, but it works really well sized for either a 0.4 or a 0.6 nozzle. I use the 0.6 nozzle. The previous version with grid/square like separators won't bind with the case well enough. The waves are the…
The diameters of the models available are 6 mm and 10 mm.
I am using the Bambu P1P, and the Bambu slicer. I was able to print this without support, and I have used the basic Bambu PLA criteria for printing, and printed it with PLA. Edit: I have added a revised file for the original base that…
Looking Glass Tray-packing puzzle by Stewart Coffin (STC #184-A) Pack six pieces into an obstructed tray. Looking Glass is one of many tray-packing puzzles by Stewart Coffin. It's somewhat unusual in that the pieces enter through a slit…
Introducing the Frostclaw from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. Use with the Frozen Wilds expansion during gameplay for a cosmetic 2 legged stance. It is intended to be…
Dustcover MK4 / MK4S for Z-axis with hole for additional cover.
Remix of a remix of a postcard holder design that wasn't on this page yet. I quite liked the triangular design but changed the angle of the postcard to make it more stable and slimmed the part a bit to make it sleeker and use less…
A basic case for for an STC-1000 (or ITC-1000) temperature controller. Prints without supports, and needs no fasteners. After printing, run the sensor wire out through the back hole of the case and run your power and device wires in…
Didn't like the standard battery that the original poster made as it needed supports and looked horrible when printed. This is about 3mm bigger on the outside and has more room on the inside for the larger makerfocus battery and most…
Dustcover for the winwing URSA MINOR 32 Throttle Metal, 32 PAC Metal and 32 AGP Metal. Printed in TPU 95A to avoid scratches
🇳🇿 Nau mai, haere mai ki Aotearoa New Zealand! Welcome to Aotearoa New Zealand! The ChristChurch Cathedral is an Anglican cathedral in the city of Christchurch, in the South Island of New Zealand. It was built between 1864 and 1904 by the…
My daughter asked for a personal jewelry box. And this is what we both developed. The box has more tiers to store the “treasures”: In the lower part you can store the big things The middle insert can be filled with rings and earrings. So…
A case designed to fit an STC/ITC-1000 temperature controller and electrical outlet. Prints support free. Designed with slots to friction fit a Type B electric outlet (decora style). The lid is intended to be held in place with #8 wood…
I recently bought a second hand Canon Selphy CP900 Photo printer, but it came without a paper cassette. Looking on Ebay revealed that if I could find one it would cost more than i paid for the printer! I couldn't find one on Thingiverse ,…
Four Fit Tray-packing puzzle by Stewart Coffin (STC #217) Fit all four pieces into the rectangular opening. Four Fit is an absolute classic, and is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first,…
Deutsch: Ich habe ein Schmuckkästchen für meine Frau zum Valentinstag entworfen und wollte sie hier mit euch teilen. Die Box bietet viel Stauraum für allerlei Schmuck. Druckanweisungen: Alle Teile können in PLA oder PETG gedruckt werden.…
Original Description: If you love shopping at Costco, you'll appreciate this 3D-printed shopping cart tray. It's designed to securely clip onto the newer Costco shopping carts (cart measurements taken in northern California) and give you…
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- This is more than just a can cooler. Most can coolers only insulate your drink—they don’t actually cool it. This…
We were tired of the Costco trash bags being left in the box and on the ground. So I made this to make my pantry a little more organized. I hope it helps you in the same way. Attached to the wall with two screws of your choosing. Printing…
See summary. The enclosure uses 4xM3 screws to mount it to the device of your interest. You can fix the controller in the enclose with the screw from the original connector protection cap. Prints in the vertical direction. Use a brim to…
I disliked other STC designs so I made my own. It has a lot of holes for cooling and there is a small gap between the object you fix it onto and housing for better cooling. I'm using wood screws, 3.5mm x 30mm, the diameter of sunken head…
This battery tray is made to hold 40 AA batteries, 40 AAA batteries, and eight 9 volt batteries. These are the amounts you will get if you purchase a pack of Duracell batteries from Costco in each of the three types. It will of course fit…
A Hi-Res M48 x 0.75 dust cap for your 2" astronomy gear. Screw the ring into a cap and you have a male threaded cap. Print it in 0.1mm layer height and you get a super fine thread. I had to scale the ring down to 99% in the X-Y axis in…
I was inspired by the Costco Cart Tray by K_Muller, and I started working on modifications to that design (initially to make it fit on my Prusa MINI) when I discovered that the designer did not allow for remixes. This being the case, I…
Prints horizontally in two halves for superior strength. The two halves can be easily fused together using superglue or other adhesive, or with a lighter. The tabs located at the tip are to help with build plate adhesion. You can easily…
Simple holder for postcards or photos. Prints without supports obviously 😎
DPS Lumbar Support Replacement Part ===================================== April 23, 2025 - Version 2 is now available! Adjustments were made to the original model based on user suggestions and comments, changes include: Changed dimensions…
Map of the states of Germany (Deutschland). It is 3.5mm thick. Hamburg and Bremen print, but are unattached. Printing: Printed at 25%, except for height which is 100% I sunk it -0.3mm to ensure contact with the bed. Print Settings Printer…
Um die Luftverwirbelung zwischen Luftberuhigungskasten und Vergaser zu minimieren, habe ich dieses Adapterstück designt. Die Idee dazu habe ich von zw-parts. Wer keinen Drucker hat, oder ungern TPU druckt, googelt einfach mal nach…
Cruiser Tray-packing puzzle by Stewart Coffin (STC #167) Fit all four pieces into the rectangular opening. Cruiser is one of a series of tray-packing puzzles by Stewart Coffin. (The other puzzles in the series can be found on the Stewart…
I have also included the STEP files for all 3 sizes. How I Designed This: The original STL was converted back to a solid model in Inventor. I sectioned the model. Then copied and moved the sections around as needed. Finally all sections…
Hinges for Thorens turntable dustcovers, for models TD145, TD160, TD165, and TD166 Mk II, with a number of improvements and a similar look and feel to the original. Prints well in both PLA and PETG. Stronger hinge pins, correct alignment…
Victor Interlocking puzzle by Stewart Coffin (STC #201) Assemble the six pieces into the polyhedral shape shown in the photo. Victor is a polyhedral puzzle descended from earlier Coffin designs such as Star of David , Rosebud , and…
Two dust caps for the Starlink cable, with attachment points for lanyard to keep them connected to the cable. Both stay on thanks for the friction with the gasket on the existing connectors.
Printing recommendations: Use variable layer height: recommended Supports: required, normal (not tree), on build plate only Fix your Costco zip-off pants clip. Or make your own buckle straps. DO IT.
Simple direct replacement handle for these storage bins, printed in PLA. Print orientation on flat bottom with tree supports.
White Ground high = 1.8mm Black Details high = 2.2mm Filament change at layer 10 if you print with 0,2mm layer high.
Only a little MMU Testcube with 3 colors. Can be cut in Prusa Slicer to reduce printtime. Print instructions Just download the .3mf to change the filament settings or download the .gcode to print it with just PLA/PETG loaded in the MMU.
Just thought it would be nice to print something useful as a calibration test. So I designed this little (20x20x20)mm dice. If you remember how you aligned it for printing you can use it like the other xyz-calibration cubes. ;) Update…
It might need to be run under warm-hot water with the knife going in and out a couple of times.
STC-1000 is a nice little temperature controller that can be used to control both a heater and a ventilation in an enclosure. 12V and 220V versions are available for 10-15 EUR (Amazon) or $3-5 (AliExpress). This box is designed to be…
I recommend you use Arachne for walls. If possible, use a 0.25 nozzle.
Remixed from plasticbruv's LSTR head & hair. Will only fit with that model.
I designed this for the basic Novritsch Rifle Scope. It was a press fit into my scope but it wouldnt hurt to add a little bit of hot glue to hold it in place. Printed on an Ender 3 Max 0.12mm layer height Polymaker PLA pro
You can display your Postcards I print ist with a 0.6mm nozzle and a 0,4 layerheigth
Simple nozzles which fits the glubot fastcap. Two sizes available now, thick and thin! PETG, 100% infill, you need supports
Update See below. Hi. I found this great Filament Swatches but i missed some details and i want Filament Cards wher i don´t have to change the modell every time when i print one. so i add a field to fill in the most important information.…
Photo / Postcard Clip Make a quick and easy photo and/or postcard collage with only a piece of string and those litte clips ! You can print them in minutes! I strongly suggest not to make them out of PLA but from PETG / ABS. This is…
DE: Eine schlichte Schmuckkiste in verschiedenen Ausführungen. Ich habe den Deckel aus Eiche hergestellt und ein Modell davon ebenfalls hinzugefügt. Die Abmessungen der Box sind 200 x 80 x 43 mm. EN: A simple jewelry box available in…
This is a Remix of the design by er2kien uploaded on thingiverse. The original design didn't fit well on my Voopoo DragX. I printed with supports. Note! Please have a look what filament you use and adjust the scale. With this filaments I…
A clip to securely hold a standard STC-1000 temperature sensor in place. Can be attached to any surface using a Command removable strip or double-sided tape. Infill: 100%
Drill perfectly perpendicular to a wall or object using these simple and small drilling guides. Available for different drill sizes. Both available with and without dustcollector. Using a dustcollector, most of the drilling dust will be…
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
Slot Machine Packing puzzle by Stewart Coffin (STC #185) Pack seven pieces into an obstructed 3x3x3 box. Slot Machine looks like an innocent little packing puzzle, but it is far more challenging than it appears! The pieces must be…
Hi, here is a realy simple postcard holder. I've attached the Fusion360 ad Step file, so you can change or adjust the design to your needs. The Postcards you see are from Venice, Hamburg, a 3D Image of Carl Spitzwegs "der arme Poet" and…
Fast, easy print, no supports. Includes mounting holes/eyelets. For those POTA activations where everything is in a backpack and you risk an accidental short - like leftover copper strands, your favourite steel wool sponge and powdered…
I made a stc-1000 box that prints without supports. I made this for my heated printer enclosure, but there are many uses for these controllers. I hope this fits your needs. The lid is attached to the base via m3 screws with nuts that are…
7/8in Strain Relief from mcmastercarr: 74125K760_SNAP-IN CORD GRIP I've also included the .stl for the strain relief so you can also try printing this component but the tolerances of the inner part are very tight. I used the Inkbird…
Remixed this brilliant case with more holes options and internal space option. Base options: “solid”(infill). Hollow base, e.g. fill with sand. Open base. e.g. hide cables, install additional indicator lights. Hole options: no holes,…
Remix of the original screw on bracket to slide into the corner brackets on my Costco shelves in my garage.
Pieces-of-Eight Assembly puzzle by Stewart Coffin (STC #77) Assemble the eight pieces to form a 2x2x2 cube or one of several other shapes. This is a fun and creative design whose pieces are based on an unusual dissection of the cube.…
My current frames broke, so i designed this. The earpieces do fold over like normal glasses. Print the front part (frames) of the glasses face down. Print the earpieces in the best way you can figure. I found it best to have them "lay…
Find out everything you need to know about the STC controller on my blog: https://nerd-corner.com/stc-3000-with-user-manual/ https://nerd-corner.com/stc-3008-2-temperature-sensors-in-one-device-full-user-guide/ 3D-Model STC3008 from…
I like to add text for other people in the shop for other people to reference, but it is not included in the model. Fastcap tape measure link: https://www.amazon.com/dp/B0000683BT?ref=fed_asin_title
english Simple postcard holder - parameterized This simple holder can be used to present postcards or postcards for selection. The size can be adapted to your own requirements using the parameterized openscad file. A variant in portrait…
This model has been depreciated: see https://www.printables.com/model/1288871-dustcover-hinge-for-thorens-turntables-new-version for the updated version. ----- A redesigned hinge for Thorens turntables models TD160, TD165, and TD166 Mk II…
Half-Hour Assembly puzzle by Stewart Coffin (STC #29) Assemble the six pieces to form a 3x3x3 cube. This seems like a straightforward puzzle, but it's harder than it looks! Coffin called this puzzle "Half-Hour" because it can reasonably…
Round base for the original Blackpink Lightstick. Has a recessed area to put the strap in as well
A dustcover for the keyboard of your Commodore. Comes in different flavours, with the chickenlips-logo and as a blank cover. Also in one piece or splitted in two parts for the more standard-sized 3d-printer. Stp-file is added. The…
The prongs on the original model were a touch too short for my bin, leading to the latch falling off. This remix extends the prongs to 7.54 mm, measured from bottom of prong fixture to top of prong. See images for how I measured the…
Three-Piece Block Assembly puzzle by Stewart Coffin (STC #38) Assemble the three pieces into the pyramid shape shown in the photo. Three-Piece Block is one of Coffin's most recognizable designs. It's surprisingly difficult despite having…
This is a lightweight notecard / postcard holder made to fit 500 4"x6" notecards. The walls are a bit flimsy because they don't need to be more rigid and it saves time and filament. We include a notecard with care instructions in all of…
Quintet in F Tray-packing puzzle by Stewart Coffin (STC #253) Fit all five pieces into the parallelogram-shaped opening. Quintet in F is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it…
Remixed this to fit the costco Kirkland napkins. you can probably fit 100 inside.
Modelled based on a picture not measurements, stays in place when riding. Print in tpu or PP
Five Fit Tray-packing puzzle by Stewart Coffin (STC #177-A) Fit all five pieces into the square opening. Five Woods is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it isn't... if it seems…
Coffin's Quartet Interlocking puzzle by Stewart Coffin (STC #93) Assemble the four pieces into a 3x3x3 cube. This is a neat little design that makes a great introduction to Stewart Coffin's interlocking puzzles. As a puzzle, it's not too…
Cuckoo Nest Interlocking puzzle by Stewart Coffin (STC #21) Assemble the seven pieces into the interlocking nest shape shown in the photo. This classic puzzle is Coffin's first design involving interlocking hexagonal sticks and dowels.…
Small prints to avoid getting sawdust oder dust in the controller of your maschine.
Simple Dustcatcher for wall drilling No supports needed Inner diameter 10mm
Designed to be mounted underneath a cabinet or shelf. I attached it with a few dabs of cyanoacrylate glue, but I'm sure magnets, hot glue, screws, tape, or whatever adhesive you lie would do the job. Depending on your printer, supports…
Can be twist-locked. Tri-wing design is made for easy grip on my fingers.
0.15-0.2 to print those threads. Use them to protect outdoor equipment from dew - ie, cable extensions
Penta-Pentomino Tray-packing puzzle by Stewart Coffin (STC #176-A) Fit all five pieces into the square opening. Penta-Pentomino is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it isn't... if…
A simple adapter to mount a cheap water pump onto a water table for kids. Reason: Mounts to the table, allows us to turn the hose off, but still lets the kids play with running water that rains down from the top of the table. Water table:…
Dudd / Missing Notches Interlocking puzzles by Stewart Coffin (STC #129 / 129-A) Dudd and Missing Notches are two closely related puzzles by Stewart Coffin. Both have the same objective: assemble six burr pieces into the configuration…
A quick and easy Costco Nitrile Glovebox Holder. Printed in PLA .25mm Layer height.
Star of David Interlocking puzzle by Stewart Coffin (STC #37) Assemble the six pieces into each of three symmetric polyhedral shapes. (One of the images shows Coffin's illustration of the three solution assemblies.) Star of David follows…
A holder to display paper or cardboard signs or postcards. The space47 version is for a local computer club. The version 02 is with stabilizing pole, the 01 version without. It is fully adaptable with freecad.
The model prints with the flat side down and needs no supports but you may have to do some post prossesing do to large overhangs.
Four Sleazy Pieces Tray-packing puzzle by Stewart Coffin (STC #169-A) Fit all four pieces into the rectangular opening. Four Sleazy Pieces is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it…
This little gizmo is used to view stereoscopic images on a postcard-sized printout. The centers of the two images should be 64mm apart for optimal results (that's the interpupillary distance this was designed for). The lenses I used were…
A small case for Hakko T12 soldering station clone. This is for 8 segment version not OLED with the JST-XH connector on the back. At the moment my printer is not in the best shape so the print quality is not too good. Soldering of the…
Cube-16 Interlocking puzzle by Stewart Coffin (STC #205) Assemble the five pieces into a 4x4x4 cube. This is an interlocking puzzle based on the same ideas as Coffin's earlier Patio Block . In Coffin's words: "It represents a conversion…
A floating wall mount for the city postcard series of lego. Designed with posts on top to prevent the lego from sliding off. They have about 1mm of tolerance so there is some slop in the fit, but they do the job of preventing the lego set…
0.15-0.2 to print those threads. Use them to protect outdoor equipment from dew. Tri-wing design is made for easy grip on my fingers, scale up or down the top part if it isn't your cup of tea.
Made to accept countersunk screws. The model is already in the preferred printing orientation, in which it does not require supports. I've included the Fusion 360 .f3d file if you want to modify it. The model is offset from the origin…
![[Updated] Costco DPS Chair Silicone Lumbar Support Replacement](https://media.printables.com/media/prints/01544801-02d9-419c-b485-22ec96633739/images/9577105_f75aedde-9e0b-40d4-9bea-eb2aeaa506a5_553758de-0120-4b01-a4f6-a43bbf2f3a26/screenshot-2025-04-23-010412.png)
![Dustcover Hinge for Thorens Turntables [New Version]](https://media.printables.com/media/prints/d8deb748-421e-460d-90ef-f3488e6d455c/images/9702157_c18b3f7a-7586-4100-ba66-bae22906b9ac_6ce68b7a-c3f8-45a9-bd5e-87b14a0266a3/new_thorens_hinge_2025-may-07_02-38-16pm-000_customizedview2241933857-1.png)
