38 models
Custom made for my Wusthof whetstone (ref 704773), here is my sharpening device ! Inspired by some i found here, i made my own, according to my tastes and needs. I purchased the stone online on knivesandtools (24€ + shipping) , very happy…
Use TPU. The part presses on to the pump and snaps into the mattress like the OEM pump.
This is a small spiral passthrough fidget with a high tolerance so it is very smooth.
Spare hinge for loungechair Hanstholm (Jysk). Print with supports.
Need a sheath for your fancy German made WUSTHOF gourmet knife? Well here you have it. I added the WUSTHOF logo on the side for some aesthetic flare, but does not represent an official endorsement by WUSTHOF of this 3D model. The knife…
Deutsch Für den "Homematic IP Funk-Temperatur- und Luftfeuchtigkeitssensor" HmIP-STHO bzw. HmIP-STHO-A habe ich dieses kleine Modell konstruiert um es außen am Fensterbrett in die Wasser-Ablaufrinne einzuklemmen. Der Keil (wird unten…
Possibly semiaquatic sauropod from the nemegt formation.
Modified the original model to have bigger wall mount and to have less parts. Consists of two parts only - the mount and the cover that slides into the mount. Just place the mount, put the sensor inside and slide the cover. The cover does…
I have always likes 3d printed fidget toys, but never thought I would be the one making it.
A dusthood tailored for the Teknomotor 1.1kW COM31400414 spindle, allowing unimpeded airflow from the fan to prevent spindle overheating while ensuring effective extraction. Two 80mm hoses need to be connected and secured using hose…
Filament: Atomic Meltmiser Layers: 0.20 mm Infill: 5% Supports: no Original PRUSA Mk2S
pass though diff cover for element rc front or rear diff for 6x6 or 8x8
My first passthrough I designed in onshape. IMPORTANT: Resolution: 0.1 works the best but you can use 0.2 Supports: No Infill: 7% Hope you enjoy Side note: I used this YT tutorial: Check it out
The battery adapter for the Drill "Performance" PCD144-NZ - created for using the battery STHOR 14.4V 78986. Why? It is almost impossible to find the original battery (Ni-Zn 14.4V 1200mAh "PBAT14-NZ" ) for this drill so I decided to use…
Coaster showing the Pesthoernchen of the Chaos Computer Club (CCC). SVG of the Logo can be found here: https://blogs.gnome.org/muelli/2009/09/ccc-artwork/ My social is on the back. Best printed with different filaments at certain highs.…
Optic post holder for the use with 0,5" posts. The hole on the bottom is made for a M6 heat insert. The hole on the side is made for a short M6 heat insert.
It takes 2 80mm hoses for maximum dust extraction with a high volume dust extraction like a Felder AF160. Its mounted to the spindle holder of Sorotec and fits nicely on the Sorotec Basic Line Z Axis. The dusthood is printed in 4 parts,…
A hose holder/guidance for 2 80mm dust hoses for the dusthood i designed. It fits nicely on the sorotec basic line z axis and is mounted with 2 M5x25mm screws into the sliding block (they package more than you need, so you should have one…
My first customization, a sheath for a 20cm Chef's knife from Wüsthof (will fit most similar shaped knives, obviously.) Customized version of http://www.thingiverse.com/thing:125109 Instructions Using the following options: knife_length =…
So I ended up making a third one for a small paring knife from Wüsthof that was also lying about as a spare. Customized version of http://www.thingiverse.com/thing:125109 Instructions Using the following options: knife_show = 0…
Sheath for my Wüsthof Classic 20cm Serrated Kitchen Knife. Product number is 4149. Customized version of http://www.thingiverse.com/thing:125109 Instructions Using the following options: knife_width = 24 knife_length = 195 knife_thickness…
We discovered that one of the knives in our knife block was too long for the slot and was actually hitting the counter when inserted all the way into its slot. These spacers go onto the existing feet of the block to raise it enough so…
This model is part of my “Printing with PETG on PETG (sheets)” experiments. To print this model, You'll need an sheet of PETG (or other, but the same material as Your Filament) to directly print on. I designed this to test the strength of…
This is a parameterized holder for any and all things circuilar, mostly sets of a few small things though. There are two models that are pre-made. One for 10 pinecil tips and one for 4 needle files. Before you get your hopes up, it was…
We got a Wüsthof 6-Slot Acacia Studio Knife Block , but it held the knives at an angle where they wouldn't clear the cupboard above. So I made this base that tilts the block forward. I modeled this in Autodesk Fusion 360. I've included…
Opisthocoelicaudia 3d model stl of a real dinosaur species (prehistoric bird-like theropod), made for display, education and collecting. Use it as a tabletop centerpiece, museum-style decor, classroom reference, or a centerpiece for your…
Remixed it for people who like me have the small holes on the right side. Only needs the one part, the original requires 2. Print with supports. Update: Added one for the bigger hole on the right. I haven't tested this as mine is on the…
update !! Sorry folks! I have from number v12 a litle bit changed ,at the top open circel both sides 0.15 mm off.the arm wil better fit and assemble too! . now is all perfect. For mine motorhome,27 years old. an kabet-holder was broken…
Can be used to fixate a IoT device to a tree using a belt. Mounted a HmIP-STHO (HomeMaticIP Smart Home Temperatur- und Luftfeuchtigkeitssensor – außen). You will need some screws: assembling top and bottom: 2x M4x12 Countersunk screws…
i didnt have any hair clips so i made these i printed them 100% infill with abs you may have to sand them down to fit properly i used a 7mm brim to make sure it wont warp print time around 4mins so i made a new arm that has a rib in the…
A test, to test how fine you can print, that the parts are still movable.
Hoptimisten sind eine dänische Spezialität. Sie verbreiten gute Laune und haben sich zu echten Sammelobjekten entwickelt. Mit ihren wackelnden Bewegungen sind sie natürlich perfekt für Autos geeignet – doch wie befestigen. Einfach…
I wanted to glue the sensor to the windows / window frames, to avoid making whole into the house.
Skadis battery holder for sthor 20V
My first customization, a sheath for a 20cm Chef's knife from Wüsthof (will fit most similar shaped knives, obviously.) Customized version of http://www.thingiverse.com/thing:125109 Instructions Using the following options: knife_length =…
![[Homematic IP] Baum-Klemme / Tree clamp for HmIP-STHO](https://media.printables.com/media/prints/bf0f8f74-959a-4904-873c-ddd7047f2b4c/images/10237580_5fee7399-8bd4-4bf1-b4f1-a17fb3cf3481_37cb6313-5ec9-4f4f-99d3-71c3924a87d5/makes-01.jpg)
