Counting matching models…
Introducing The Bu Stik - a simple mod for your Bambu Lab P1P! Explanation of the Files: Bu Stik You must print a Bu Stik for each accessory you add - the Bu Stick will require tapping into place, so you will not be able to remove it from…
Acoustic panel hooks as wardrobe or something like this. --- Garderoben - Haken für Akustik Panele oder ähnliches
📦 Caixa da Copa do Mundo para 200 figurinhas Modelo projetado para fácil impressão, com bom acabamento e baixo consumo de material. O arquivo .3mf já está configurado e pronto para imprimir no Bamboo Studio / Orca Slicer. ⚙ Principais…
Přívěšek na klíče se siluetou westíka. Key pendant with silhouette of Westik.
Here is a simple kit to build a credstik from Starfield. Tried to get it as close as possible using the in-game model as a reference. Matched the original font (calibri) for better quality, but it prints very thin with a .4mm nozzle,…
Wandhalterung für Plastikabdeckung von Gasflaschen
This are the spares for building a 3D printed wing RC glider named "PLASTIKANT" - because it is mainly made out of plastic.. This is a flying wing similar to the well known ZAGI made from foam. The spares are 3D-Printed, the beams are 6mm…
Spare part for the Playtive Station. Category: Construction Toys
Hi, ich habe eine Wandhalterung für Bauhaus Akustikpaneele konstruiert, an der du meine Wallplanter aufhängen kannst. Die Halterung kommt völlig ohne Zusatzmaterial wie Schrauben etc. aus und beschädigt die Paneele nicht. Außerdem kann…
Hi, ich habe eine Wandhalterung für AKU Akustikpaneele konstruiert, an der du meine Wallplanter aufhängen kannst. Die Halterung kommt völlig ohne Zusatzmaterial wie Schrauben etc. aus und beschädigt die Paneele nicht. Außerdem kann man…
UPDATE: Added 3 smaller nozzles that require less filament. <<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>> Second update: I purchased a tube of Loctite brand plastic glue and compared the strength to the Bostik glue. Check out my other…
Hi, ich habe eine Wandhalterung für OBI Akustikpaneele konstruiert, an der du meine Wallplanter aufhängen kannst. Die Halterung kommt völlig ohne Zusatzmaterial wie Schrauben etc. aus und beschädigt die Paneele nicht. Außerdem kann man…
This is a pack of computer props made at Stikbot scale for your stop motion animations! Whats in the pack: Keyboard Mouse Headset PC Monitor (Regular, Curved, Retro) Other Info: Any type of filament can be used to print any of the props.…
I drink a lot Instant Tea and i mix and drink it from a PET bottle, That's was the reason why i needed a funnel which fit and hold in a Standart, a "Big Mouth" PET bottle and on my Tea Container ;) fits on normal European PET bottles fits…
Thank @3DSourcerer and @BiTN_84310 for their ingenious designs - I only mixed @BiTN_84310 's C100 GoPro mount with @3DSourcerer' s awesome Bu Stik mounting system :) So, a dirty Tinkercad remix to mount my Tapo C100 camera on the Bambu…
In this Version screws are not needed any more, just glue or melt the plastic on the case nips for holding the board on it. Also was made about 3mm more space, this was needed to use an old iPhone 4 Battery as a power delivery. Print…
*** THE SCALE IS PROBABLY WRONG, SO OPEN THE ORIGINAL "E" STL AND SCALE THESE SO THE "Æ" HAS THE SAME EXACT LETTER HEIGHT *** Sorry for the inconvenience! I needed the Danish/Norwegian letters ÆØÅ for the @flowalistik letter board , and…
Wall Hook without drilling a hole suitable for 13mm thick akustik panels
Create custom rails for the TROFAST bins because I didn't like the existing ones. Designed for minimal footprint and to fit under an IKEA LACK table. Two versions one for the plastik ones ans one for the metal bins.
The famous silhouette of the 3 gang members
Habe hier einen einfachen aber doch ziemlich guten Halter Konstruiert um Schlüssel an einer Akustikpaneele zu befestigen
Hier eine Lösung für unansehnliche und unappetitliche Quark Packungen. Entweder ist der Aludeckel komplett zerfleddert oder jedes mal eine neue Klarsichtfolie draufmachen. Das ist jetzt Geschichte ;) Bei Bedarf einfach etwas scalen,…
Wyze Camera v2 mount for the excellent blu_stik system
Add an AirTag to this great wallet design. It sits in just because the back is pushed up against the wallet, but if you really want to secure it, a dab of silicone will do the trick nicely. I suggest printing it with the inside down, and…
This design is an enclosure for an UltraStik analog joystick so it can be used either as a USB joystick or mouse. This joystick can help people that cannot use a traditional mouse or a traditional gaming controller. It can be plugged…
-Enlarged cardcompartment from 4 to 6 cards. Uploaded model is without logo on lid
Use with M2x8mm screws Category: Gadgets
I created a small hook (10 mm width) for acoustic panels in horizontal direction. It is clamped on the upper side and supported on the lower end to increase the stability of the item.
Selbst designtes Akustikpaneel, das in beliebiger Größe wählbar und erweiterbar ist, bietet eine flexible Lösung zur Schallabsorption. Die Paneele auf den Bildern haben die Maße 75x35 cm(ein Würfel hat 5x5cm). Für diese Größe 75x35cm…
print with 6 wall, PETG recommanded. In order to re-enforce part, holes are available for 2x M4x50 screws (no bolt) and 1x M3x15 with bolt. Video demo here: https://crostik.cr3design.ch/wp-content/uploads/2021/07/VID_20210613_193943.mp4…
My first foray into designing something Category: 3D Printing
A Free Download Engineered for Silence and Style. This grille is the free LITE version of the popular Cyberpunk Circuit series. It was specifically developed to combine striking aesthetic with technical precision, making it the perfect…
I liked the original design, but I remixed it to accommodate a larger battery salvaged from a disposable Breeze Prime (1500mah). The top cover is also remixed to allow the buttons to be used, and the LED holes are more centered. I've…
Designed by Sanglorian, modelled by ridhwanbsp , commissioned by Sanglorian. Check out the Tuxemon project .
The bracket and catch together will hold the Kwik-Stik telescoping pole securely to the zuca cart. The pole diameters are designed for the Compact Disc Golf Cart made by Zuca but may work for the other versions of carts (not verified).…
Eine Box für die Spielfiguren Von CATAN das Spiel Ich habe während des Drucks eine Pause eingebaut um die Magnete ein zu fügen. Es werden 8x3mm Magnete benötigt! Die Box kann zwar auch ohne Magneten gedruckt und benutzt werden aber dann…
Der Halter ist für 13mm und 20mm Spaltmaß ausgelegt. Ich habe ihn aus PETG gedruckt ohne Supports. Einfach einsetzen mit erhöhtem Haken und diesen anschließend nach unten drehen. Jetzt hällt der Halter fest in der Wand und ein Bild oder…
Dieses Produkt durchlief eine lange Reihe von Testläufen, bis ich dann mal zufrieden war. ;-) Gedruckt habe ich mit PETG und einem Layer von 0,1mm.
Ribbed Harmony – Die universelle Akustik-Wandvase Beschreibung Bringe Leben an deine Wände – egal ob auf glattem Putz oder modernen Akustikpaneelen! Die Ribbed Harmony Vase besticht durch ihr elegantes, vertikal geripptes Design, das die…
Replacement clip button part for the Dirt Devil Simpli-Stik corded stick vacuum. I designed this replacement part to repair a vacuum with a broken clip. It uses the spring from the original part and should be of similar strength. The part…
Applewatch Akustikpaneel Stadion für eine Durchführung sowohl USB A als auch USB-C
Eine Universalhalterung für Wandpaneele der Fa. Bricoman (v.a. gibts die polnischen Baumärkten). Die Maße: Spaltmaß: 23mm // Spalthöhe: 12mm // Leistenbreite: 24mm Gebaut für eine Einschraubmutter M4, um universell Sachen anbauen zu…
Small shelf for acoustic panel. Easy to print with PLA, PETG etc.
My take on a stick grenade, inspired by the stick grenades used by various armed forces in the conflicts of the 20th Century. Should be scaled for use with 28mm heroic miniatures. I'm printing a test right now to see how it turns out. For…
Ive got a lot of Eevees sitting on my desk, and I wanted to make them cuter/ more festive, so here we are.... This hat is designed to fit the Low Poly Eevee designed by FLOWALISTIK . It fits by pressure, and some cleanup may be needed for…
The claw arm of my “Pik Stik Pro” broke and I made a replacement for it. I also made a custom shoulder screw to replace the plastic rivet. I ran a tap through the M6 nuts. At this small size, some printers are not so accurate with fine…
Appel AirPods Gen2 Stadion Akustikpaneel
A case design for DSTIKE WiFi Deauther OLED Mini. This is one i picked up from maltronics many years ago. The case is designed to fit a 10250 LiPo cell and has a switch (no idea of the part number - just a spare i had) wired inline for…
Ripstik mounting brackets. Print on its side so layers are oriented in strong direction. Ripstik snaps securely into place. Intent is to mount horizontally, but the grip is strong enough that I suppose you could do it vertically too. Just…
A model that I drew up to mount this for use by my granson. Although the holes on the lower section are threaded, I found that it worked well using 5mm x 10mm PC fans screws after slightly oversizing the holes.
doğalgaz kombi plastik dolap kapağı üniversal tamir parçaları / natural gas combi plastic cabinet door universal repair
Drawn to have a tight fit. To mount it I heated the printed part with a hot air gun and pushed it onto the SV-8 shaft. Printing Instructions Prusament PETG Urban Grey layer height 0.15mm No raft No brim No support Feedback Appreciated…
This is an enclosure for a fullrange speaker in mid century modern style. The speaker used is a Tangband W2-800 The model was created by myself, i started a loudspeaker company a few years ago (https://www.wellenwerk-akustik.de/ ) and…
Designed for my 7 year old grandson, with the hopes that it would fit for a couple years. My hand is barely too large for it. The tilted platform is intended to mount switches to help emmulate a mouse feel.
This is a replacement part for Blistik's Mobius Pan & Tilt. This part allows the use of a HC-SR04 ultrasonic sensor with the Pan & Tilt mount. (use with these parts: https://www.thingiverse.com/thing:1401116 ) The ultrasonic sensor is…
remixed from: https://www.thingiverse.com/thing:3652439
This is (what I call) a 'leveling block' for a NGP (No Ground Plane) Side Mount Firestik CB Antenna. My truck cap (Jason brand) is angled and not straight (up) and so in order for me to mount my antenna so it is level (plumb) and not…
this was quest for my friend, to replace lost cap to his outdoor waist water bottle, there was not any brand, hope someone find it usefull, it had unusual (to me) pipe thread, almost one inch diameter, “O” ring fits to the bottom of the…
Wir planen eine Logistikhalle mit Akademie für Protektor. Unser Wettbewerbsmodell wir hier Veröffentlicht. Anbei alle Dateien um diese mit Gelände nachdrucken zu können. Das jeder auch Architektur drucken kann.
I ordered a Mag Stik plus from Ultimarc and the plate it came with was rectangular in shape - and my joysticks were the Happ style sticks with the square base and screws - I didn't want to redrill my control panel, so I made this plate to…
I bought some acoustic treatment from Thomann. these panels work better if spaced from the wall, so i made these simple spacers Just fix the main part with a scew (glue can be enough for the small panels I think) and add a nail in the…
it is a guy sticking up the middle finger it was a sticker I copied on amazon but made it my own way Thoe
Ein Akkustik Panel Haken zum aufhängen von Kopfhörern etz. Sehr Stabil
Pflanzentopf für Akustikpaneele Dieser 3D-gedruckte Pflanzentopf wurde speziell für Akustikpaneele mit vertikalen Lamellen entwickelt. Er wird direkt in den Zwischenräumen der Paneele befestigt und benötigt keine Schrauben oder…
Background: We put a door into a frame that wasn't fitting for a door. So we needed to cut the slots for the hinges and the striking plate / slutblik into the frame. Additionally we had to cut the door, so the cuts for the hinge on the…
Gothic office organizer made by OpenSCAD. Enjoy! ✨ 🦇 More office organizers with another emblems ⛧ ✞ ✨ Repo 📚 Home 🏡 Ko-Fi ☕ ✨ The swastika is an ancient solar symbol, representing sun, movement, and prosperity, with roots in Ukrainian…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ineTr1QONAw Category: 3D Printing
Dezente Befestigung einer JBL Flip 6 an einem Akustikpaneel. Das Modell hat eine angesenkte Befestigungsbohrung.
This model i used alot of techniques on how to do it. there were alot of rough areas that required a lot of thinking and i learned many new things like using the knife topology tool and using the boolean modifier but i think this may be…
Just a model of a personal version of the Ugly Stik Category: Art
Re-designed this excellent model to fit the Bostik 206 glue gun which has a much different shape. Supporting the back end of the tool also helps prevent it from dropping out of the stand and causing spills or melting things. The best part…
Wappen Logistikschule der Bundeswehr mit drei eingelassenen Rundmagneten 5 x 3 mm.
Included are 3 models, a single, a double and a slime! version. As far as I know these will probably only fit Danish outlets but could possibly work on German ones…? Anyway will probably design some more in the future with hooks or usb…
This is a custom wall mount for a Fiskars Pruning Stik. There are many models of Fiskars products so please see the photo to ensure you have the right one for use with this wall mount. Included are the source .fd3 (Fusion 360), .stl, .3mf…
Taktisches Zeichen Logistikbataillon
t.akustik Wallmount adapter for 50mm thick acoustic sound absorber. This adapter lets you mount the sound absorber at a distance of 100mm from the wall for increased acoustic properties of the absorber. Printed in PETG, 5 walls/bottom/top…
Uzavíratelný box pro akrylové barvy od japonského výrobce. Průměr otvorů 10x36mm, maximální výška lahvičky s barvou 45mm. Tělo doporučuji tisknout spodní stranou dolů. Mřížku je možné mít na volno, avšak doporučuju ji přilepit pomocí…
I put some work into designing this stylish, space-themed floss holder. A major focus was creating an ergonomic handle that feels really comfortable to hold. The multiple hooks also make winding the floss onto the holder incredibly…
Remix from linked model. Settings: Material: PLA or PETG Infill / Füllung: 15% - 20% (Grid oder Gyroid). Layers / Schichthöhe: 0.2 mm. Supports / Stützstruktur: Required
Pieza de repuesto para armario plastiken, se recomienda imprimir como tal cual esta posicionadi y es necesario el uso de soportes
Klemmhaken mit Öse für Standstange. Des ist Teil eines Projektes für einen Plätscherbrunnen für Balkon oder Innen. Basis ist eine Plastikschale, 32 x 25cm, in die Supermärkte wie Lidl etwa 2-Kilo-Portionen von Hühnerbeinen packen. Diese…
This model was designed with the “Wholesome” purpose of being used as a sacrificial element to accomplish your task come hell or high waters. Use the sharp edges found on the off-center side to scrape, or crack. Leverage its slim profile…
These are 3D printed parts for my Instructible to build a motorized ripstik: https://www.instructables.com/Motorized-Ripstik-Using-Hoverboard-Motor/ Category: Sport & Outdoors
Dieser Deckel wird auf die Probeflasche gesteckt und kann dann gedreht werden bis das richtige Symbol angezeigt wird. Es gibt drei beschriftungen: OOS - Spezifikationsverletzung / Out Of Spec AZ - AZ fehlt / COA not received °C -…
I made a Gridfinity Holder for the DSTIKE Deauther Watch. Should work for other watches too of course. Please share your Makes, give a thumbs up if you liked it or let me know what i can improve <3
Embout de barre finale pour moustiquaire enroulable verticale ou latérale.
Octagonal restrictor plate for the Ultrastik 360 arcade joystick. Printed in PLA, 40% infill and 3 walls to make it a bit stronger. Fits perfectly on both my Ultrastik joysticks. Comparison photo included for the original round and square…
Introducing the all new hand drawn stickman: Name: Stikman Age: Around 2 minutes old Personality: flat Humor: flat
Gothic office organizer made by OpenSCAD. Enjoy! ✨ 🦇 More office organizers with another emblems ⛧ ✞ ✨ Repo 📚 Home 🏡 Ko-Fi ☕ ✨ The swastika is an ancient solar symbol, representing sun, movement, and prosperity, with roots in Ukrainian…
para colocarlo primero se raspa la goma original y se pega con pegamento instantáneo lo mejor es hacerlo con TPU. como esta en TPU y mi impresora no puede hacer soportes de otros materiales use un cautín a 280c para darle forma
es werden: 1x Grundplatte 2x Schienen 6x Aufhänger benötigt!
Dies ist eine esun plastikspulen Mitnahme zum wieder aufwickeln von schlecht gewickelten Spulen.
Organizing system for plastic bags up to 60mm wide / Ordnungssystem für Plastiksackerl bis 60mm breite
Aufsatz der wie das Plastikstück von einem abgewickelten durchsichtigen Klebeband (siehe Foto) z.B. Zum selber aufwickeln von Klebeband oder papier. English: Essay of how the plastic piece from an unrolled transparent adhesive tape (see…
I use small espresso shot cups, and using the scale over the Puristika's tray is a very high drop from the portafilter. I've created this model to get the scale a little bit closer to the portafilter and don't get all the cabinet painted…
selsterklärend, eher für Leute mit kleinen fingern geeignet
![Silent Cyberpunk Fan Grill 120mm - Airflow & Akustik Optimiert [LITE]](https://media.printables.com/media/prints/c98897e4-e09b-43a6-acc2-954b72fe4d50/images/11229546_f05667d0-cad2-45cb-ad8d-3387c97e1eb5_e32afa11-c5b6-4a3d-991e-97269d8464b2/screenshot-2025-11-19-211004.png)
![Simple Gothic Pen Holder With Right Swastika Emblem [OpenSCAD]](https://media.printables.com/media/prints/2c814680-f420-404a-ae91-f21bfb184596/images/12605083_581796a6-d21c-40f6-a8de-146a57989c7e_ea297766-dae5-4643-a6df-6023652ff6f0/large_display_simple_pen_holder_with_right_swastik_emblem.png)
![Simple Gothic Pen Holder With Left Swastika Emblem [OpenSCAD]](https://media.printables.com/media/prints/4c3bf197-3769-44f1-b4b1-efd8c7a89716/images/12605022_68b67950-6253-447c-8463-077bb422cbef_7c67b94e-ba9d-489f-9a53-d091bd1e12ff/large_display_simple_pen_holder_with_left_swastik_emblem.png)
