Search results: streich

Sort order

44 models

P
PrintablesEsKa11

Scratch Gauge 13mm wide ruler / Streichmaß für 13mm breites Lineal

Compatible with a 13mm wide ruler. Block is best printed laying on the reference surface. Bolt standing on its head. 0.4mm nozzle, 0.2mm layer Info: Old model I used to upload to Thingiverse in 2019.

Downloads
806
Likes
266
Rating
5
P
PrintablesJCW

parametric marking gauge for normal ruler (Streichmaß)

I created a spreadsheet in the FreeCAD file to adjust the measurements of the ruler and the bolt. So it should be easily adjustable even for users who are not familiar with CAD. To save the environment (and your prusament) there is a…

Downloads
348
Likes
44
Rating
4.43
P
PrintablesDaniel Onescu
Downloads
293
Likes
47
Rating
5
P
PrintablesJenson

Streichmaß für Stahllineal 12.9mm breite / Marking gauge for steel ruler 12.9mm wide

Ich habe mir hier ein Streichmass für ein Stahllineal Konstruiert Das Stahllineal ist 12,9mm Breit und hat eine dicke von 0,5mm ---------- I constructed a marking gauge for a steel ruler. The steel ruler is 12.9 mm wide and 0.5 mm thick

Downloads
228
Likes
27
Rating
5
P
PrintablesJenson

Streichmaß für Stahllineal 17,9mm breite/ Marking gauge for steel ruler 17.9mm wide

Ich habe mir hier ein Streichmass für ein Stahllineal Konstruiert Das Stahllineal ist 17.9mm Breit und hat eine dicke von 0.5mm ------------- I constructed a marking gauge for a steel ruler. The steel ruler is 17.9 mm wide and 0.5 mm thick

Downloads
133
Likes
16
Rating
4.5
P
PrintablesSurfalex2000

Gingerbread spreader (Lebkuchen Aufstreicher)

A Device to spread Gingerbread dough on wafers. Its a original German Christmas sweet. This Device consists of different parts. But you only need to decide on one plate size. Have fun

Downloads
111
Likes
1
Rating
0
P
Printablesreinerv333

Lackier & Streichpyramide

Eine Pyramide zum Teile ablegen beim Streichen damit nichts mehr auf die Unterlage kommt und man überall gut hinkommt!Auf die Oberseite habe ich jeweils einen kleinen Klecks Silikon gemacht dann verrutschen leichte Werkstücke nicht so…

Downloads
109
Likes
5
Rating
5
P
PrintablesJoaelso

Streichmaß / Marking gauge

Es wird noch zusätzlich eine M3 Schraube mit Mutter benötigt.

Downloads
105
Likes
11
Rating
0
P
PrintablesTomas

Marking Gauge / Streichmaß (Inch/cm)

(English Version below) Ein Anreiß-Werkzeug, auch Streichmaß genannt , wird in der Holzbearbeitung verwendet, um genaue und konsistente Markierungen oder Linien auf Holzoberflächen zu setzen. Es besteht aus einem Balken oder einer Leiste,…

Downloads
103
Likes
11
Rating
0
P
Printableskonzty

Scratch Gauge (Streichmaß) for stainless steel ruler 2023 v3

The scratch gauge is designed to fit one of those stainless steel rulers. A ruler 25mm wide and .5mm thick fits niceley. Requires a M5 screw / nut combination for assembly. The STL should already have the correct orientation for printing,…

Downloads
101
Likes
21
Rating
5
P
PrintablesEmvi 3D

Streichholzschachtel

Streichholzschachtel mit Deckel zum aufziehen, für Große und kleine Streichhölzer. Einfach http://bit.ly/45TL4JE kaufen oder von einer alten Streichholzschachtel das Papier abschneiden und drauf kleben.

Downloads
96
Likes
15
Rating
5
P
Printablesmoonrat

Streichmaß (marking gauge)

Streichmaß (marking gauge) Streichmaß (marking gauge) auf der Vorlage von: https://www.1-2-do.com/projekt/linealanschlag-fuer-stahl-lineal-aus-dem-3d-drucker/bauanleitung-selber-bauen/4009969 Leider gab es die .stl Datei nicht mehr…

Downloads
92
Likes
15
Rating
0
P
PrintablesSebastianDruckt

Mount for Dictum Marking Gauge French Cleat Holder Streichmaß

I designed a part to mount my Dictum marking gauge at my french cleat wall. The inner Radius is 15 mm and the opening is 22 mm If you like my work and want to support it you can do it here: https://paypal.me/sebastiandruckt

Downloads
90
Likes
22
Rating
5
P
PrintablesTom

Streichmaß Verbreiterung

Die Streichmaß Verbreitung ist gut einsetzbar, bei abgerundeten Kanten, zum Beispiel bei(Holz oder Metall) Das kleine Loch ist für eine Gewindeschraube. Zum leichten fest ziehen. Ist aber kein Muss

Downloads
79
Likes
7
Rating
0
P
PrintablesDSLight

Streichhilfe-Painting stands

Alle Seiten der „Pyramide" sind gleich lang, somit ist ein Ausrichten nicht notwendig. All sides of the “pyramid” are the same length, so alignment is not necessary.

Downloads
74
Likes
12
Rating
0
P
PrintablesTom

Streich,Maß für einen Zollstock (Glieder, Maßstab)Teil 1

Egal, ob Gipskarton, Holz, Bretter, Styropor, oder oder oder! Das perfekte Tool, um eine Linie zu ziehen mit einem Bleistift! Alles ohne Alu Latte! Ich habe alles in PETG gedruckt! ich habe auch zwei Pica Bleistift Halter konstruiert!…

Downloads
71
Likes
12
Rating
0
P
Printableshorrovac

Streichmass / marking gauge

A tool to precisely scribe a set dimension away from an edge. Except for your printer, you will need one hex head M5x15 bolt, a hotmelt M5 insert, an M5 washer and some suitable glue. For the scale you will need an inkjet or laser…

Downloads
65
Likes
8
Rating
0
P
PrintablesTom

Pica Bleistift halter für Streich Maß !( Teil 2 )

Ich habe zwei Bleistift Halter konstruiert! für Bleistifte der marke Pica! Einmal für den großen Baubleistift! Und und einmal für den kleinen ! Ideal für das Streich Maß aus Teil 1…

Downloads
64
Likes
29
Rating
0
P
Printablesgenja

marking gauge holder / Streichmaßhalter

Please don't forget to “Like” the model. / Bitte vergiss nicht das Modell zu “Liken”.

Downloads
57
Likes
14
Rating
5
P
PrintablesVanDerPol

Streichmass / coating measure

This is a coating measure for a 30mm wide and 1mm thick ruler. It fits me perfectly, I added a second file this fits for a bit wider ruler 30+ Screw is an M6 with a fluff nut Insert disc 18mm Das ist ein Streichmass für ein 30mm breites…

Downloads
50
Likes
4
Rating
0
P
PrintablesRubiaLab

Synthesizer Stand for Waldorf Streichfett Rocket 2-Pole

This stand was designed for the Waldorf Streichfett, Rocket and 2-pole synthesizer, holding them in a 45° angle. It can be printed easily without support. I can be printed easily laying on the side without any support.

Downloads
44
Likes
2
Rating
0
P
PrintablesBen

Halter für Streichmaß

Halter für Streichmaß, befestigt mit 2Stk. 4mm Spanplattenschrauben

Downloads
38
Likes
6
Rating
0
P
PrintablesDERedneck

Kugelfangeinsatz 14x14cm Streichhölzer

Ein einfacher, schnell druckbarer Einsatz für jeden Kugelfang mit 14x14cm Zielscheiben damit man auf Streichhölzer oder Zahnstocher schießen kann. Der Abstand zwischen den Streichhölzern / Zahnstochern beträgt 10mm, sollte Bedarf an mehr…

Downloads
37
Likes
4
Rating
0
P

Gürtel-Streichholz-Halter

Gürtel-Streichholz-Halter Die Schachtel kann am Gürtel leicht geöffnet werden um ein Streichholz zu entnehmen, beide Anreis-Flächen liegen zum großen Teil frei um das Streichholz zu entzünden.

Downloads
37
Likes
4
Rating
0
P
PrintablesFelix

Ultradünne Wandspinne - Realistischer Schatten-Streich

Willst du jemanden so richtig erschrecken? 😱 Diese Spinne wurde speziell entwickelt, um so realistisch wie möglich auszusehen, wenn sie an Wänden, unter Lampenschirmen oder auf dem Kopfkissen platziert wird. Durch das ultraflache Design…

Downloads
28
Likes
2
Rating
0
P
PrintablesRene

Streichmaß holder for Skadis

Skadis holder for 200mm Steinle “Streichmaß”

Downloads
27
Likes
2
Rating
0
P
PrintablesFrankWL

Anreisshilfe fuer Stahlmass 30cm/50cm (Streichmaß)

ReadMe.txt Anreisshilfe zum gleichmaessigen anzeichnen von Massen. Die innenliegende Druckplatte verhindert, dass die Fluegelschraube auf das Stahlmaß drueckt und dieses beschädigt. Bestehend aus: 1x Oberteil 1x Anlegestueck fuer 30cm…

Downloads
23
Likes
4
Rating
0
P
PrintablesRalf

Streichmaß 200mm

Zusammenbau: 1x . M3 Mutter 1x . M3x10mm, 12mm Zylinder Schraube Die Schraube wird direkt durch die Rückseite des Anschlages geschraubt, welcher dann mit dem Streichmaß verbunden wird. Danach einfach den Schraubenkopf auf die Schraube…

Downloads
19
Likes
1
Rating
0
P
PrintablesJNPrinting

streicher

das ist ein Instrument bei dem mit dem Schläger gestreicht wird.

Downloads
17
Likes
4
Rating
0
P
PrintablesTommmy47

Knob for Markinggauge/Streichmass - M5 Screw

The Tolerance is 0.1mm for screwhead and screw. The Knob has a Diameter of 40mm. I Printed in PLA. Nozzle:0.4mm Layer:0.16mm 5 Walls 35% Infill

Downloads
16
Likes
0
Rating
0
P
PrintablesLord_Thoth

Streichmaßhalter - Marking Gauge Holder

Dieser Streichmaßhalter ist für das 200mm Westfalia Streichmaß (Artikel Nummer 129668). Ich habe den Halter mit den Standardeinstellungen für das Prusament PETG in Orange gedruckt mit meinem Prusa MK4 gedruckt. ------ This Marking Gauge…

Downloads
16
Likes
1
Rating
0
P
PrintablesTorsten Brumm

Gridfinity - Halter "LetsBastel" Streichmaß

Halterung für das Lets Bastel Streichmaß 2.0 für das Gridfinity System.

Downloads
16
Likes
5
Rating
0
P
PrintablesPhilippe Kirsch

Waldorf Streichfett/Rocket Synth Module Stand

I designed a small stand for the Waldorf Streichfett/Rocket synth modlue to be put ontop of another synthesizer.

Downloads
12
Likes
1
Rating
0
P
PrintablesJH3D

Wandhalter Streichmaß

Wandhalter für Streichmaß von Amazon Link: https://www.amazon.de/dp/B0CFXSG8B6?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Downloads
10
Likes
0
Rating
0
P
PrintablesMadeInGermany

Hohe Wände oder Decken streichen? => Verlängerungsstück (PETG) drucken!

Wir streichen unsere Wände und Decken. Der Aufgang von der 1. zu 2. Etage ist ca 6 Meter hoch - eine so lange Verlängerung für die Farbrolle findet man nirgends. Entweder ich besorge mir ein Gerüst oder ich drucke mir eine Verlängerung…

Downloads
10
Likes
2
Rating
0
P
PrintablesUwe Volk

Streichmaß für Stahllineal 18,5mm

Mein Modell passt zu meinem Stahllineal mit 18,5 mm breite. Der Befestigungsschraube habe ich einen geknurrlten Griff verpasst.

Downloads
9
Likes
1
Rating
0
P
Printablesklingele28

Stahllineal Streichmaß

Remix von Parametric woodworking marking gauge -Anpassung auf 29 mm breites Stahlineal 1 mm dick. -Verlängerung des Klemmhebels für besseres Handling. Verbindung angepasst auf M3x20 mm Schraube Für weitere Anpassungen habe ich die .f3D…

Downloads
9
Likes
2
Rating
0
P
Printablesreinerv333

Stick zum Holzleim verstreichen/ Gluestick

Ein einfacher Stick um Kleber in Ecken verstreichen zu können wie ein Silikonspachtel. Ich verwende es für Holzleim Ecken wenn zuviel herausgedrückt ist.Auf jeden Fall ist TPU nötig damit es Elastisch ist und sich genau in die Ecke…

Downloads
9
Likes
0
Rating
0
P
Printablescluuu

Dictum Marking Gauge (Streichmaß) Gridfinity bin

I needed a Gridfinity bin for both of my Dictum marking gauges, so here it is. The size is 5x2x4. I printed it in PETG with 10ish % infill, PLA should work fine as well. No supports are required. The fit is snug and the fine adjustment of…

Downloads
7
Likes
0
Rating
0
P
PrintablesMarkus

Marking gauge holder / Streichmass-Halter for Skadis

Skadis-Holder for a Marking gauge. Splitted into 2 parts for easier printing without supports. print the holder lying on the back. print the Skadis part standing up.

Downloads
6
Likes
1
Rating
0
P
Printables

Streichhilfe-Painting stands

Alle Seiten der „Pyramide" sind gleich lang, somit ist ein Ausrichten nicht notwendig. All sides of the “pyramid” are the same length, so alignment is not necessary.

P
Printables

Waldorf Streichfett/Rocket Synth Module Stand

I designed a small stand for the Waldorf Streichfett/Rocket synth modlue to be put ontop of another synthesizer.

P
Printables

Stahllineal Streichmaß

Remix von Parametric woodworking marking gauge -Anpassung auf 29 mm breites Stahlineal 1 mm dick. -Verlängerung des Klemmhebels für besseres Handling. Verbindung angepasst auf M3x20 mm Schraube Für weitere Anpassungen habe ich die .f3D…

P
Printables

marking gauge holder / Streichmaßhalter

Please don't forget to “Like” the model. / Bitte vergiss nicht das Modell zu “Liken”.