36 models
Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…
A snap on Picatinny rail mount for Surefire Pressure Switch. Once put on it's very hard to take off, decide carefully before applying. Tape can be used to stop the pressure switch from sliding out. Print right side up, with support and…
Adapter mount for Surefire HL1 helmet lights. Current screw holes are configured for Ops-Core ARC Wing-Loc rail adapter (20-98-103) but use the .step file to adjust hole size and position to suit your mounting requirements. Tolerances in…
This is a cap for a surefire M340DFT Mini Scout Light. The inner diameter of the cap is approximately 30mm. Enjoy!
Remix from mcmik3. Add additional structure to lock in M-Lok mount. May not suit for Key-mod. Haven't been tested. V2.1 shall not work, so I made a V3. Just use V3. This time it shall work. I'm not good at modeling, but it shall works.…
Print settings: support touching buildplate 0.2 mm layer height integrated brige to help support quick relese lever, need to be cut out e.g. by exacto knife You need: 2x M3x8 screw with flat countersunk head 1x M3x10 screw with flat…
Designed and providing a replacement button for both the left and right side of the Surefire X300U-A light, may be compatible with other models. This will allow ease of access for those who may have physical limitations that prevent from…
I used M4x10mm countersunk screws for mounting it
This piece allows an O-Light PL-PRO Valkyrie flashlight to fit into a surefire x300 specific omnivore holster. The omnivore will need some modification to the rails to fit in, but will then engage the snap as the x300 would. Print in…
This is a Mount designed to interface with the optics mounting screws on an FN P90/PS90, The mount is compatible with all Surefire Pro Series light bodies (the ones with the hinge mount) Using OEM Hardware Please Note that as this is a…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad I wanted to have a holder or bracket for storing Surefire G2X flashlights and keeping them handy. The mount uses two…
Battery case for surefire 18650 with onboard recharging. Normal 18650 will fit with space on the end. O-ring AS658-019 1/16" x 3/4" (Same O-ring as P6 tail). Case was designed to minimize size/diameter. Wall is thin in threaded area.…
This is a remix of the block template from Filip Kolinsky. This is part of my EDC / Dresser Valet series that I'm creating. This one is for a Surefire Stiletto flashlight but can also fit smaller folding knives like my Kershaw Kuro. If…
I designed this adaptor to mount the SureFire style flashlight remote pressure switch (original is designated SureFire ST07) to Picatinny (RIS) rails. No screws, it just snaps on. Printing with TPU will allow easy installation, PETG will…
The Surefire Battery and Charger Case is a remix of zx82net’s Waterproof Box v2 zx82net’s design looked pretty awesome so when I set out to make a battery holder for Surefires LiFePO batteries it seemed like a great place to start.…
I made this to hold my flashlight but really anything 28mm round should fit fine.
I have designed this mount to attach a replica SureFire X600 flashlight directly on my replica Zenitco Sport-4 handguard made by 5KU. Note that the shorter SureFire X300 style flashlight might not fit as the bulky flashlight tip would…
1x 3,5 gridfinity holder for surefire flashlight
A multiboard Surefire RC2 holder that uses either two normal Multiconnect attachment points or one Anti-Rotate Multiconnect remix attachments that I designed. https://www.printables.com/model/790060-anti-rotate-multiconnect Made to fit…
During my airsoft night games I found that when we split up that it was sometimes hard to see who was who. Using a small and simple print and some gel color filters I was able to create some very nice colored lights to distinguish my…
Surefire helmet mount one piece One piece lower tolerances which hold better Print settings 3 walls 40% infill 0,2mm layer organic tree supports (threshold angle 25°only on bed)
This 2x4x3U Gridfinity module is designed to securely hold two Surefire 6P flashlights, providing an organized and efficient storage solution. The module features precise, snug-fitting compartments tailored to the dimensions of the…
Replica of Surefire M622V SCOUT LIGHT® It’s a model created using AI, serving only as a supplement.
Protection for the SureFire M 300 Scout flashlight with or without rings for securing with paracord. The "eared" model needs supports.
This is a basic logo for Surefire. Prints fast and easily with standard print profiles. Adjust size, infill, etc to your liking.
This is a mount for the Surefire Hellfighter crew served light. It will work on Gen 1-3 have not tested on Gen 4 or 5. Giving you the project file as well so that way You can modify the mount to suit your needs. Personally I have adapted…
I was looking for a grip ring for my SureFire G2X and decided to make my own. It locks into the lower curved groove past the battery cap. It can be difficult to stretch the rib of the grip ring into the groove. Be sure to remove the…
It is best to draw a support for the inner part (on which the insert will rest after printing)
Surefire helmet mount one piece One piece lower tolerances which hold better Print settings 3 walls 40% infill 0,2mm layer organic tree supports (threshold angle 25°only on bed)
I was looking for a grip ring for my SureFire G2X and decided to make my own. It locks into the lower curved groove past the battery cap. It can be difficult to stretch the rib of the grip ring into the groove. Be sure to remove the…
Protection for the SureFire M 300 Scout flashlight with or without rings for securing with paracord. The "eared" model needs supports.
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad I wanted to have a holder or bracket for storing Surefire G2X flashlights and keeping them handy. The mount uses two…
3D model description This Model is inspired by the SureFire SOCOM556-MINI 2 Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders Dimensions: - Length: 122MM - Widest Diameter: 38mm 3D printing settings My advice so you…
3D model description This Model is inspired by the Surefire SOCOM556-MINI MONSTER Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders Dimensions: - Length: 126mm - Widest Diameter: 43mm 3D printing settings My advice so…
