Counting matching models…
Change log 2025/01/01 Added STEP and Fusion 360 source files. 2025/12/08 Added v10, only change is 5mm taller walls NOT for commercial use, if you want to sell these please get in touch. The charging cradle/puck prints with no supports…
Other requirements: 1. Gearbox (would be ideal but could also be used in a different way) 2. cylinder with no holes. 3. arduino or other fire control unit . (will work without it, just not efficiently at all.) 4. Air valve (I used one off…
If you need to buy the tracker: Seeed Studio SenseCAP Card Tracker T1000-E Make sure to use coupon code B737HUW8 for 10% off. Commercial Use and Attribution Notice: Alley Chat T1000 Holster © 2024 by Alley Cat and Majestic AV, LLC. is…
I've included a Reverse Model for use with some 3rd party chargers. Fusion 360 File included!
2025/02/03 Added STEP file A collection of cases, frames or holders for the Seeed Studio SenseCap T1000-E. Any ideas welcome, please add your suggestion in the comments. Printing info (I use Orca Slicer 2.2.0): up right no supports needed…
There were a few errors with the meshes so parts were becoming separated and broken, they don't now. Also they are STL now instead of 3MF.
This is a protective case for the Seeed SenseCAP T1000-E which lets it attach to Magsafe compatible phones. It is only 9.5mm thick and gives access to the button and the charging port on the back. There is also a slot cut out for a…
I'm printing these in PETG with 15% infill. But really all settings are at your discretion as long as the durability will suit your own purposes. I recommend ‘molle V2,’ especially for straps as the cuts are center on the molle clips…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Bracket for the back plane of a M720q/M920q Lenovo ThinkCentre mini PC that has a NVIDIA T1000 graphics card fitted to it.
I just started playing with Meshtastic radios. I ordered a bunch of different ones. So far I like these the best: Seeed Studio T1000 ( https://amzn.to/3EzfasS ) Lilygo T-Echo ( https://amzn.to/4hq5UpG ) RAKWireless Wismesh Pocket (…
This is a limit switch carrier that can be added to a Raymarine tiller pilot to prevent the unit from self-destructing in case the motor attempts to drive the unit beyond its physical limits. It needs to be printed in PETG, HT-PLA or…
use m3 heat set insert (5mm OD, 3mm length) and 6mm m3 bolt OR just use zip ties in the corners 🤷
Piggyback clip that can be attached with double-sided adhesive tape and holds a single T1000-E. You may experience issues with reception depending on orientation and phone usage!
This 3D print helps position the magnetic charger for solid contact and worry-free charging of the Sensecap T1000-E in any orientation. Most charging sleds I found rely on the built-in magnets to keep the device seated, which didn’t…
I use this clip: https://amzn.to/49yIZ8n But you can also just search for UV-K5 clip on ali or other sites. I printed it vertically to give it the strongest layer lines for both the clip and the tracker. So be sure to use a brim or raft…
A holder for magnetic cable for Sensecap T1000-E
Print flat side down. Was designed for 0.45 mm line width. Adjust size +- 0.5% if necessarily.
Simple remix of nalanengine's base for the Wagner HT1000 heat gun. Great way to secure it when it's hot. The base simply slides onto the back end of the heat gun. The original is great, but its hollow base may be aesthetically pleasing…
CPAP and Wire Guide for RatRig Vcore3 ^300 with PT1000 mount and shelves Please upload your makes, would love to see them
I created this pegboard holder so my heat gun would have a place to live. I used generative design to create the back portion of the holder. So far I have had no issues with the hot heat gun warming up the holder or pegboard. This fits a…
V2 now available! I've updated the model with a cutout at the top to allow the T1000's strap or lanyard to pass through — a common issue with the original design. V2 also features smoother, more refined edges and additional rounding work…
Sensecap T1000-e wallmount Remixed from another design. Added walls so its more secure and straight when the card is in. If the cable comes out on top mirror the file. Otherwise your logo on the card will be upside down. Disclaimer My…
Quick manually measured model to test my and others' designs for fitment and orientation. I don't currently plan to print it, but if I do I'll print it vertically with a brim. The pics here are rendered from the textured Fusion model…
Seeed Studio Sensecap T1000-E charging cradle/puck with magnet attachment
Print front down, with supports (for cable peds mainly. Use tape on the from to secure to surface for use. Includes post for winding excess cord. Designed in Onshape:…
Half height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
A FDM printable friendly cap for a 360 prism (MT1000 360 prism or simialr) to replace or repair missing or broken caps. Simply screws on like the original. The FDM printed thread is tight, running it back any forth a few times will…
The first model didn't allow the charging pins enough clearance, so I uploaded V2 to replace it. Once that worked I translated the opening on to DevoCut's remix for the same effect. Print this vertically with a brim and it will come out…
Full height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
The Seeed Studio T1000-E is an incredible device. Compact with fantastic range and built in GPS and other sensors. But it can be so much more when travelling. Here is an aerodynamic magnet case to securely affix your T1000-E to the roof…
I own the EGO Power+ LT1000 portable area light. It is a pretty great product, but positioning it can be tricky. There are threaded holes on the bottom, but the 18 pound weight of the light + battery is too much for most tripods. However,…
🇫🇷 Français Titre : Étui SenseCAP T1000-E pour collier de chien 🐾 Description Cet étui monobloc accueille un SenseCAP T1000-E (nœud / tracker Meshtastic) et s’enfile sur un collier de chien : le collier traverse l’ ouverture arrière de…
Used the moneyclip from this model https://www.printables.com/model/1034675-slidewallet-v2 and the holster from https://www.printables.com/model/1070854-holster-for-seeed-studio-t1000-e-meshtastic-tracke All praise for the modeling goes…
T1000 police badge
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional
A crudely crafted charging platform for the Seeed T1000 Trackers. Simple OpenSCAD file included. Would be nice to chamfer and fillet some edges in the future. The plaform securely holds the charging plug and cable. When the T1000 is laid…
A simple remix of the Molle clip and the T1000-E case allows the tracker to be easily attached to Molle attachment points and taken along.
This is the same tracker holster as made by Alley Cat, but I made a cutout so the tracker can be charged in-holster.
The peanut style linkage mechanism allow you to stick multiple of them together, handy for charging multiple T1000-E cards at once. You need two peanut connectors for each connecting edge. So for two chargers you need two connectors, for…
The charging cable for the SenseCAP T1000-A & T1000-B trackers doesn’t hold securely enough, so I created a docking station where the connector and charging cable are held in place. At the back of the docking station, excess cable can be…
Not for printing, but for use as a reference model (for space claim, making compatible designs, etc.) Includes recesses for charging port, button, and LED position. For more information on this product, see :…
This model allows you to mount your Sensecap T1000E to your dog's collar. This makes for a great pet tracker. While it's easiest to print flat, angled printing will provide a much stronger print.
If you have the courage to void your warranty and open up the T1000-E (very well glued and epoxied) case, this is a new case to add USB-C. I've found that heat gun + slow prying was the best approach to opening mine. The end result is…
Case for SenseCAP T1000-E Meshtastic Radio by Seeed Studio
The slot in the t1000e is not sufficiently large for paracord. So I made this simple loop so I could hang the t1000e from my backpack with paracord. I printed the example in the photos using PLA. I held it in the heat gun for a few…
Was tired of carrying the charging cable for my SenseCAP T1000 and figured i can make a stand that i can keep at the office, bedside and what not. I also didnt like the cable only used usb 5v so this design makes it where you can use usb…
I made this battery cover for the Midland GXT1000 for my colleague. As shown in the video, you have to carve/file a little bit so the clip of the walkie-talkie can get over it. I can't modify it, as I don't have the walkie-talkie in my…
Base de carga para T1000E y tope para que el cable no se salga. Recomiendo imprimir en la posición base del archivo con soportes de árbol.
Has a bottom ledge and a lean towards the wall if used vertically, magnet on connector makes it sit in nicely with no need to remove the standard clip for hanging on belt loop, lanyard without keys holds in quite well also. Back cap uses…
recomended a tuff resin but a normal anycubic one should work
Print it at .2 to make sure the fits the snap, otherwise it should not require any supports. SenseCAP Card Tracker T1000-E for Meshtastic on SeeedStudio.com
I wanted to be able to mount my T1000-E to my Multiboard, so here we are. Supports are necessary.
Spare part for keyboard Category: Computer
Mount/holster/case for the SenseCAP T1000-E LoRa tracker, specifically for Meshtastic dog tracker usage. Parametric FreeCAD file to allow customization and adjustment, but the model is a bit messy, so I would expect only minor adjustments…
T1000 Pickup Truck Model This pickup truck is inspired by the T1000 vehicle from the Roblox game Runaways *. It was requested by my little brother, of course—he seems to have a talent for choosing the coolest vehicles for me to make. The…
The part that holds the headlamp on the e-scooter. Printed in PETG with 100% infill on an Ender 3. Still going strong after more than a year on Prague's cobblestone streets™.…
I have printed a few of these on a Prusa MK2S using PLA with 0.35mm layers.
NEW revision 2026-10-22 the original revision worked mechanically but didn't protect against water A 3D-printable replacement rear fender for the BlueTouch BT2000 electric scooter , designed to survive rough roads, potholes, cobblestones,…
Remix du modèle lié, avec possibilité d'assembler dos à dos 2 supports via Vis et insert M3 J'ai imprimer l'ensemble avec fill 15% et fill 50% autour des trous et inserts
Seeed Studio Sensecap T1000-E charging cradle/puck with magnet attachment
Introduction The original battery for my Toshiba T1000SE laptop was completely dead, and the laptop doesn't work with just the charger connected. To get it to work, I had to feed approx. 7.8V (the voltage of a fullly charged 6-cell NiCd…
A simple remix of the Molle clip and the T1000-E case allows the tracker to be easily attached to Molle attachment points and taken along.
I wanted to be able to mount my T1000-E to my Multiboard, so here we are. Supports are necessary.
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional
Not for printing, but for use as a reference model (for space claim, making compatible designs, etc.) Includes recesses for charging port, button, and LED position. For more information on this product, see :…
The slot in the t1000e is not sufficiently large for paracord. So I made this simple loop so I could hang the t1000e from my backpack with paracord. I printed the example in the photos using PLA. I held it in the heat gun for a few…
This model allows you to mount your Sensecap T1000E to your dog's collar. This makes for a great pet tracker. While it's easiest to print flat, angled printing will provide a much stronger print.
My design joins the endless collection of Benchy🌊 remixes. This wasn’t multi-material or dual-color printing—I used eSun PLA+ Beige filament for the base, then post-processed it with acrylic paint in a metallic finish 🖌. As you know, the…
25cm high bust of T1000 from Terminator 2 to be printed in parts. This design has these STLs: -Bust -Glasses -Base Thanks for stopping by :) Link to Patreon :) patreon.com/Artoys3dPrint Busto de T1000 de Terminator 2 de 25cm de alto a…
Introduction The original battery for my Toshiba T1000SE laptop was completely dead, and the laptop doesn't work with just the charger connected. To get it to work, I had to feed approx. 7.8V (the voltage of a fullly charged 6-cell NiCd…
Wagner HT1000 Heat Gun Mount for use with the Multiboard System. Use these multiconnect connectors: https://makerworld.com/en/models/642696#profileId-632145
Terminator 2 - T1000 (Robert Patrick) - 1991 3D printable model.
Replacement Antenna Guard for the midland gxt-1000 and gxt-1050 handheld radios. Printed out of 95a tpu so more flexible than the original.
