Counting matching models…
Description The T250 is a next-generation, high-performance 3D printer built from the ground up for speed, reliability, and print quality. With verified real-world acceleration of up to 250,000 mm/s² and sustained print speeds exceeding…
I really do not know who designed this or rather scanned this, but i believe this must be on this site. I don't think Thingiverse has much time left. This is a 1 to 1 replica of the original, it just snaps in place really well. (Altough…
Made a simple mount to add the Dayton Audio TT25 Pucks to the CSL Accelerator and Load Cell Brake pedals(probably works on other pedals as well). The mount uses the original bolts and has just enough thread to hold the mounts and pedals.…
It should be printed on the right side, so that deformable surfaces deform elastically
Coin compartment in place of the Avensis T25 button print from pet g plastic support - only from the table
1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…
Toyota Avensis T25 Wiper nut cup
Attaches to the nut on the top bolts for each pedal. These attach using the screws that come with the TT25. Print in the orientation they are saved in and use supports. Recommend you print with enough walls that the mount part for the…
Trichter passend zu Öleinfüllrohr am T3. Funnel for oil filler pipe.
These mounts allow the Dayton Audio TT25 transducer (bass shakers) to be mounted to the Fanatec CSL pedals. There is a separate model for the accelerator and brake pedal. The mount is secured to the TT25 via M3x15 bolts and then the…
A mount to fastening Dayton bass shakers to Fanatec csl elite v2 pedals. May or may not print with support. Mount with zip tie. I use the mounting bracket shipped with the shakers, but might work without. *Updated version from the one…
Replacement vent for the Yamaha Enticer 250 snowmobile hood vent. will need some supports. Mine was printed in PETG. You will need 2 small machine screws or bolts with nuts to install
Das ist ein Nachbau vom Hornet250 der von Mimic UG gemacht wurde. Leider gibt es die Hersteller nicht mehr und der Frame wird auch nicht mehr hergestellt, also hab ich einen Nachbau davon angefertigt. Der Frame unterstützt 16x16 bis 32x32…
Hello, i've made a Sun visor clip replica with the exact same dimension of the original one. Will fit all type of Transporters, campervans, jokers, syncros and vanagons in general, i have a '85 joker Westfalia. Actually there are two…
This is a mounting solution for the Dayton Audio TT25 puck transducers for the Simsonn Pro pedals. I remixed Barracuda72's original design so that it was one printable object instead of separate components. This modification necessitates…
Dayton TT25 Bass Shaker Mount for V3's.
Jig to block shift lever for adjustment. For VW T3 4 speed and syncro transmission.
Wanted to create a compact mount that didnt require additional hardware. This uses the original screws that came with the shaker puck (originally used to mount to the adapter ring). Two zip ties are used to secure it to the pedal. It's a…
Inspired by RamjetX design https://www.thingiverse.com/thing:3077632 I made a bass shaker using the Mini Bass shaker pucks by Dayton for my Aluminium 8020 SimRig by www.swedishrigdesigns.com. In the stl files it's included also one design…
I initially started designing my own 200x200x370mm version of this but then came across 3DCatts SFF Mini ITX Steam Machine Case v2 Airflow and they had nailed the design and was only a few centimetres bigger than the design I was working…
This little chip fits over the main sear of an airsoft replica CT25 and keeps the trigger reset from tripping. *This is not for, nor able to be used on, an actual firearm. It is only for an airsoft replica!
Print in anything .2 layer height. 4+ permimeters. Designed for M4 heat inserts.
Kärcher NT25/1 Ap accessories holder 5.033-915.0 replacement
Basic mount to add Dayton Audio TT25 to the BJ Sim Racing pedals. This should work with any of the pedals. UPDATE 02/07/24: Redesigned the mount point to back of pedal as the attachment point for the throttle is narrower. This also added…
A cord take up drum for a continues rotation servo with a t25 spline. Print instructions Unassociated tags: servo drum, servo horn, servo hub Category: Robotics Summary A cord take up drum for a continues rotation servo with a t25 spline.…
As the US Ordnance Department developed the T23 medium tank and received approval in May 1943 to produce 250 tanks, 50 were requested to be upgunned with the new 90 mm T7 gun, with 90 mm equipped T23 being designated "T25".
Wall mount bracket specifically for the Ego HT2500 hedge trimmer. Please mount it to a solid board. Printed in Galaxy Black ABS with 3 walls, 4 top/bottom layers, and 15% infill.
First of all, a big thank you to Matt for the outstanding development work on the world's fastest printer (accelerated by Volgger to WR), the T250. On the T250, the four legs are so high that not everyone can print them. I split the legs,…
The trigger on my dumpster-dived weed eater broke, so I put together a replacement. Seems to work fine. 4-5 perimeters with PETG seems to give decent flex for the return piece, though I have only used to it a couple of times so far.
This is a cover for a Torx T25 screw head. I printed it in PETG and then lightly tapped it into place. It is meant to be crushed a bit to stay connected.
DDD Wall Control hanger set for the Crescent 3/8" Drive Pass-Thru X6 Tool Set CX6PT25 Everything you'll need to build a hanger for this tool set is included here. If you have a standard I3-sized print bed, rotate the 11x piece by 38° in…
People who are bundling lots of cables with this red plastic cable organizer loop on the back of a Lenovo ThinkVision series monitor are aware of the problem that the loop constantly opens up due to the bundle's thickness, especially when…
Replace your key buttons like mine.
Includes: Rear Hatch with a slot for the TBS Unify Pro32 HV and an MMCX 90 degree Antenna, such as the Foxeer Lollipop 20x20 M3 glue- (or velcro-)on stack mount (I use a Matek H743-mini V3) 14mm camera canopy (tested with the Caddx Ant)…
Print settings: Nozzle- 0,4mm Filament- PETG Infill- 99 percent Wall line count- 7 I printed the model with 7 outer walls, and at an angle with supports, to ensure better strength. I modelled it in Inventor Autodesk, the measurements…
Materials: 2x Dayton Audio TT25 12x M3x4x8 heat insert 12x M3x10mm bolt 6x zip ties for strain relief Assembly is quite simple: Install heat inserts into mounts Unbolt pedal spacers Slide spacers into mounts Attach TT25 to mounts Zip tie…
Bracket to mount a double TT25 Dayton Audio bass shaker beneath your DX Racer gaming chair. You may need to use the 5mm spacer to enlarge the space between the chair and the bracket. I unmounted the armrests as the screws weren't long…
Clamp to secure the gas throttle to the diesel pump. Lost my original one so i designed a printable one.
Toyota Avensis T25 EU compatible tweeter speaker trim for custom speakers (such as Ground Zero) Modelled in Fusion360 based on the original Toyota Avensis tweeter speaker mount with better speaker angle and fitting for aftermarket…
Description: A custom-designed waveguide for matching the depth of the Visaton W170s' origin of sound with the Vifa/Peerless/Tymphany XT25G30-04 ring radiator. The diameter of the WG matches the woofer's. The waveguide should also fit on…
Project: https://simracing-pc.de/en/2023/08/08/diy-project-tactile-feedback-abs-effect-for-simracing-pedals/ Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer Brand: Anycubic Printer: Vyper…
Ich habe das von lukie80 entwickelte Gehäuse weiterentwickelt und Platz für 2 Mosfets von 3D Freunde geschaffen. Außerdem hab ich es etwas vergrößert und auf beiden Seiten vom Board Platz zur Kabelverlegung ermöglicht. Außerdem habe ich…
A cord take up drum for a continues rotation servo with a t25 spline. Print instructions Unassociated tags: servo drum, servo horn, servo hub Category: Robotics Summary A cord take up drum for a continues rotation servo with a t25 spline.…
Needed an adapter to install an SKR 1.4 Turbo with TMC2209 stepper drivers, after a few tries I finally came up with one that works. I used Jayo PLA Meta in Gray, 1.8 layer height. M3x5 Screws to mount the board, M3x5 with washers to…
Summary Project: DE: https://simracing-pc.de/2024/06/16/vrs-pro-pedals-haptic-feedback-bass-shaker-mod-tt25-mit-simhub/ EN: https://simracing-pc.de/en/2024/06/16/vrs-pro-pedals-haptic-feedback-bass-shaker-mod-tt25-with-simhub/ Discord:…
Toyota Avensis T25 - Wesfalia towing device bracket for electric connector with retraction
The GPS bounced around in my vehicle, so I made this case to fix it on a vehicle wall. The magnetic charger cable can be connected below. Print instructions You might need support for the top opening.
For printing using 2 filament colors (typically black and white) if you want to be able to see the socket sizes. You might have to manually "paint" the numbers in your preferred splicer tool to assign the second color to them. This holder…
First of all, thank you for clicking on and maybe printing my model :D Case and lid for remington BHT250 Print settings: Speed: depends on printer Infill: 5-100% Number of walls: at least 2 Retraction: depends on printer Have fun printing…
Designed this to mount a Dayton TT25 to the Moza SR-P brake pedal. In theory, this should work for accelerator and clutch pedal as well. Print Settings Printer Brand: Creality Printer: Ender-3 V2 Neo Rafts: No Supports: Yes Resolution: .2…
Motor cover clip with logo Toyota
I have a TwoTrees TT25 Laser Engraver that I've just started working with. I was watching this video https://youtu.be/UeF0NW0m1Y8?si=MSqPCJgPEvX__Kvs that talked about adding a crosshair for improved precision. I decided that I wanted to…
Two Spindle tools to disassemble the spindle of your mill, big tool is for the nut/cover on the spindle nose and the smaller tool for the preload nut in the spindle. You will need 2x M4x25 bolts for the big tool and 2x M5x50 for the…
I would recomment printing it atleast in PETG so it doesnt melt in the sun
Update 22-04-04 Got a request for 3 holes motor mount so i did and it has been uploaded ! - Tarkusx Hey sup all ! Don't have much time to write things but here my new TKS GT25 fully 3D printed made for 65mm props !!! 2s + Hope you will…
Needed an antenna mount, due to the fact that I was not able to get the long Antenna or an extension. So I designed this little mount. You will need a hole for the Antenna cable and two holes for the guide pins. Glue them to the case,…
Replacement for a missing knob. Print Settings Printer Brand: Anet Printer: A6 Resolution: 0.1 Infill: 100% Filament: various PLA 1st white, 2nd black Category: Music
Hydraulic oil filler cap for T25 tractor. M45x2
I modelled this in fusion 360, because it broke on my car print settings Nozzle: 0,4 Filament: PETG Infill: 99 The inside might need som filing or sanding
MCU Fan cover for the Geeetech A10 Pro, with the GT2560 ver 4.0 MCU. Remix of the model by Despacho3d. Helps prevent print material from falling through the fan grate, possibly causing overheating and failure of the MCU. Also helps to…
Printable speaker ring for Deaf Bonce Apocalypse AP-T25 NEO tweeters. I've printed mine without bottom layers and after i filled it with resin. No issues so far. Print with PLA or ABS if you plan on using it with resin. Resin doesn't…
Made two versions of a control box for my P3Steel. Both are made for Geeetech GT2560 Rev a+ (possible fit others as well?) Rev 2 is made for Raspberr Pi Zero, also with space for an DC-DC converter. Attached is also a cover with cutouts…
Mount for the ZOHD Dart250g to carry both an FPV cam and the Insta360 SMO 4K cam on the nose of the aircraft. SMO cam mounts with an M3 bolt and nut. Removable even if camera mount is glued to the aircraft. FPV cam mounts with normal…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended. The upper hole is meant to be used with a…
A replace of propeller protection for Potensic T25 drone. this version has interchangeable pegs. if desired, instead of the pegs you can use metal rivets with a diameter of 2.4 mm for a length of 6 mm. Print with 100% infill at 0.15…
Holder to connect a TT25 to the Fanatec CSL Elite V2 pedals. The holder is held in place by two zipties and it has a spot for two wago 221's to connect the cables.
Like I said, I bought my Fender Mustang LT25 amp used and it had a cracked handle so I decided to challenge myself to try and recreate the OEM part as accurately as possible. The coolest part is that it needed zero modifications from…
Passen bestimmt auch für viele andere Modelle. Ich habe es nur gedruckt, aber mir wurde gesagt es soll prima passen und lässt sich trotzdem gut überschieben. Gedruckt aus schwarzem TPU mit 50% - 100% Infill
Makita BO5041 Orbital Sander to RIDGID VT2534 Auto Detailing Hose Adapter Category: Machine Tools
I designed this for our machine shop. We rotating carbide indexable tooling and this holder is very convenient. Holds a full set of wiha t6-t25 and 6ip to 25ip. The T20 and T25 are the T handle ones, rest are screwdriver style. Attach to…
As I haven't found any adapter for this infrared camera I made one myself. You need ZnSe Focus Lens PVD 20mm x 101.6mm (or better 20mm x 50.8 mm) that is widely available on Aliexpress (I bought one as cheap as $5-6). I uploaded also the…
housing para el spotlight de unilight modelo SPOT25E-040-WE, para instalarse en tren retractil o tren convencional. impresion en abs, esperemos que el calor generado al ser usado no deforme la pieza. para tornillo de 3mm y tuerca sencilla
This is just a mounting block for the Raceline LTE pedals by Thrustmaster that allows using the Dayton TT25 plates from https://www.printables.com/model/804682-thrustmaster-pedals-haptic-mount . The side facing the TT25 mount takes M3…
Replacement for Yamaha snowmobile kill switch. Must print in TPU so it is flexible enough. I printed at 40% infill.
Dayton Audio TT25 mount for sim racing
The stock gasket is 0.3mm too small, making it almost impossible to centre the LED. This gasket centres the SFT25R perfectly. Recommend white PETG or ASA filament.
Grate to cover the holes on the rear cover of Haas ST25Y. We run another machine behind our CNC Lathe and found out that it was throwing chips into the vent holes at the rear of the machine. Made this little design to help keep the chips…
Building RH3Ds Ender 3 NG based on an Geeetech A10 I needed an adapter for the electronics box to mount the GT2560 v3 on DIN rails. This is a quick an dirty model directly created in PrusaSlicer but fulfills the purpose.
I recomend print the fan with PETG, 10-15% infill and 3 wall perimeters.
A replace of propeller protection for Potensic T25 drone. Print with 100% infill at 0.15 resolution.
ORGANIZZATORE GT252 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended. The upper hole is meant to be used with a…
MODELLINO DI ABITAZIONE GT25 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
plug with wire holder for plotter HP T2500
Replacement threaded clip for the Chevrolet Aveo T250. I've destroyed that clip while removing the side plastic trim to access the C213 connector. I recommend printing in PETG due to high summer temperatures. I printed this using 0.3mm…
Simple plate mount for the GT2560 control board onto 2020 extrusion Made to suit my Tech2c Hypercube build but may suit others Update: Rev2 of base plate has shorter tabs to allow for the cover (if you already printed V3 (R1) then just…
Bracket was printed for replacement of the "original" GT2560 board fan, provided with the printer. Original fan was loud and annoying during print, so I decided to replace it with bigger and much quieter fan. I've used standard 80mm…
ORGANIZZATORE GT259 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
"Introducing a sleek, minimalist solution to keep your Eufy Homevac S11 battery (model T2501) organized and accessible! This versatile holder is designed to be easily mounted on both pegboards and walls, providing a perfect spot for your…
I needed a case for the GT2560 mainboard and remixed the Prusa Case. You can modify the file if you want in OpenSCAD. It is a work in progress!
ORGANIZZATORE GT250 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
I made it for my Fenix WT25R Flashlight, but u can adjust thikness of “mount clip top1” for yours.
To open the bonnet (hood) of a Mercedes-Benz Vito W639 or W638 when the release cable is broken or stuck, you need to remove the front grille using a Torx T25 bit. The grille is secured by three screws positioned at a 45-degree angle,…
I made this adapter to fit Dayton audio TT25 pucks for sim racing pedals. Offset to fit Simgrade VX-Pro pedals. SMRK2 adapter is needed. Inside bolt pattern is for adapters to fit Simagic haptic pedal reactor. I used this model…
Devuelve la vida a la bandeja del maletero de tu Toyota Avensis T25 (wagon) con esta pieza que se suele romper por el uso. El modelo es para el lado izquierdo, simplemente se puede reflejar para usarlo en el derecho. Soportes: SÍ…
PARTI MECCANICHE FUSION_GT25 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
Didn't want to screw the camera into my wall and didn't find an existing mount, so I made one! Fits the listed model but may work for others, see pic for roughly sketched measurements. Will list them below as well, these are for the mount…
The PT2522 is a high Quality speaker chassis at a modest price of around 50 € per piece currently. To preserve maximum flexibility, it however comes without a front plate which is required as a mounting frame. Moreover, when used as…
This is a basket holder with a mesh for catching paper from the HP T2500 printer. Printed from Hyper ABS filament.
