Counting matching models…
Recreation of the Datacard which carried the Death Star Plans in Rogue One . It is 88mm long, 51mm wide and 4mm thick. Printed at 0.2mm layer height with ironing enabled. There are four filament changes. White, initial color. For the back…
When i saw the original Prusacaster , i immediately ordered the hardware kit from Thomann and started printing the core piece that accepts the bridge and pickup, but when the kit arrived, none of the holes aligned with the printed…
Es una estaca para clavar en la tierrra para poder usar la tecnica Low Stress Training con las plantas. mejorado el agarre en la tierra, agujero para unir una con otra y llegar a lugares mas lejanos imprimir plano sobre la cama, no…
Chatacabra is one of the most iconic monsters from the Forbidden Lands. They are “ Amphibians that use their long tongues to seize and devour prey such as Bulaqchi. Their evolved forelimbs store a sticky mucus-like substance. When…
SD card holder modeled after the Datacard which carried the Death Star Plans in Rogue One and A New Hope . The tray which holds the SD cards is held in place with enough resistance that it won't come out accidentially. It is 88mm long,…
-Las piezas unidas requieren de soportes -Imprimí al 50% de relleno aunque con el 35% también debería ser suficiente para obtener buena rigidez
Sistema per installazione della catena portacavi per Flying Bear Ghost 5. L'intero progetto si può installare sulla stampante 3D sia con configurazione Bowden originale, che con modifica direct drive Orbiter o direct drive Sherpa mini.…
Un'esplosione di allegria per la tua tavola! Questo modello combina un guscio d'uovo schiuso con le iconiche orecchie e zampette di un coniglietto. È perfetto come svuotatasche, portacaramelle o piccolo contenitore per ovetti di…
F-14 Tomcat TACAN Control Panel
portacapsule dalle linee semplici e sobrie , capacità di circa 12 capsule
This is a remix for the Printacaster to fit the parts from a Squier Affinity 2023 edition, model number 0378203550. Mainly the core was remixed to fit the different bridge, pickups and change to a string-through body. The bridge and strap…
Set di vasi e portacandele Anvora di Polymeria Il set di vasi e portacandele Anvora incarna l'eleganza moderna con le sue linee pulite e il design sofisticato. Composto da un elegante vaso e portacandele coordinati, questo set unisce…
Should be printed in PETG or ASA to resist weather well. I have tested on a tactacam reveal XB but unsure of others. Works by just slipping between the gap in the back of the camera and sliding the tightening strap through the opening.…
I wanted the Gears for a future cosplay, so here's my design for them since I couldn't find one I'd like to use. This won't work with the toy. This is the first version, so it might not be the best fit, and the details don't come out as…
Masaüstükalemlik ve telefon tutacağı
Il modello in questione l'ho realizzato per un azienda che aveva bisogno di esporre i caschi in vendita e dopo vari tentativi e test ho realizzato un poggiacasco ergonomico e resistente. Il modo migliore per stamparlo è sdraiato.…
diviso in 4 pezzi che vanno incollati, per far combaciare bene i pezzi li ho scalati leggermente
This is my largest modeling project to date, so there are some issues with the model itself, with weird internal holes in parts of the model. But nothing that some sanding can't fix externally. The model is presliced to fit a 235x235 bed.…
Modified the core to fit HSS pickups. I also moved the screw holes to fit a saddle bridge plate, and added holes to thread the strings through. I also modified the middle hex part, to fit the extra pickup as well as the core and pickplate…
📌 Cadena portacables 3 en 1 – Organización total para tu impresora 3D o proyecto DIY 3-in-1 Cable Chain – Total Organization for Your 3D Printer or DIY Project ✍ Descripción corta / Short Description ES - ¿Cables por todos lados? Esta…
Modelo lo mas similar que pude a la original, sirve para mi mitsubishi colt GLX 1995 pero seguramente funcione tambien en Lancer y algunos modelos más. Fotos comparativas con la original (rota) aunque la impresa es una version anterior al…
I had a great idea for a stackable tray for small parts for my workshop. But as it happens, something went wrong, it simply cannot be stacked :) This opens up a great opportunity for better designers than me to remix this awesome work…
Title: The Venus of Tacarigua: A Digital Heritage Reconstruction Description: This 3D rendition is a modern tribute to the Venus of Tacarigua , the most iconic archaeological symbol of pre-Columbian Venezuela. Originating from the…
Trofeo per premiare il vincitore del Fantacalcio 25-26. E' costituito da 3 parti, il trofeo principale, la "F" che va incollata al trofeo principale e la base che invece viene incastrata.
Printing mishap with Printacaster core short model on Creality K1: After 18 hours of printing the Printacaster core short model on my Creality K1, I discovered a major issue: the bridge couldn't be installed. The bridge, designed with 5…
A TiPX / Zeta magwell for the Tacamo Blizzard. Instructions / print settings: Print the mounting points to the marker with 10 walls for maximum strength Use support material Carbon fiber nylon is recommended but PETG will work well…
Ho creato partendo da una foto del cartone il robot del famoso cartone animato Yattaman
The Tascame Portacapture X8 isn't shiped with any form of casing in the box and I wanted one which can hold all the naseserry equipment for it. So I put an inlay in one of Whity's Rugged Boxes for the Portacapture X8 itself along with…
Taca do Pyssla lub innych koralików służy do segregowania kolorów i później do łatwego brania odpowiednich koralików. Nic nie rozsypuje się po stole. Kilka pudełek można łatwo ułożyć w stos i schować by później wrócić do układania. The…
Estaca para clavar en la tierra y enganchar la manguera para riego
6 variations of key types for 60% keyboard, should fit all standard cherrys i printed with 2 layer walls and 5% infill with no issues. key caps with PART1 and PART2 are keys with font included on them, theyre printed as one object with 2…
Ring-Itz are a platform using standard ring sizes to display your favorite 3D models on your fingers! In Prusa Slicer, simply add a 5x3 mm negative volume cylinder to the bottom of your prints to be compatible with your Ring-It. This is a…
sempli gettone con il logo del fantacalcio, ideale anche per il carrello della spesa. Possiede le stesse dimensioni di 1€
A Tray to store 4 batteries. I like to keep my spare rechargables in one tray on a trickle charger.
Portacandele realizzato con PLA SunLu trasparente
I ordered a guitar kit from Thomann Europe to build The Printacaster . When the guitar arrived, I noticed that the hole placement of the 3D model didn't match the hole placement of the guitar hardware. I assumed this was due to a new…
I turned this cool Data Keycard I made a while back into a really cool looking ID Card Holder Made 2 varieties ID holder Keycard Holder it has been testing at my own job and thickness of the holder does not hinder its function at fits…
bu silikon tabancası tutacağı sayesinde silikon tabancanızı asabilirsiniz
I was looking for a pair of filter for my mask, an Honeywell Valuair, but now they are too expensive or impossible to find and in a search i found the MK2 design of TentaCat0702 and got the idea of the adapter, bought a 3d printer, drawn…
Découvrez la majestueuse figurine géante d'Atacama, une réplique en modèle 3D du célèbre géoglyphe qui s'étend sur les hauteurs du désert chilien. Cette impressionnante sculpture capture la grandeur et le mystère de l'œuvre ancienne,…
This adapter plate allows fixing the Bowers & Wilkins 705 S2 to the Atacama Nexxus Essential 600 by using 4 pcs M6 x 25 screws. Printed on Prusa Mk4, 0.2mm structural, Prusament PETG, 20% Gyroid infill
Base portacanillas molona Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: Yes Resolution: 0,2 Infill: 50 Filament: Elegoo Pla color feo Notes: Base portacanillas molon y practico :-) ,los vastagos fueron hechos con…
The Marcato Tacapasta noodledryer is made of pretty bad plastic. It gets brittle and breaks after a couple of years. I have designed new triangular links, cut off the arms from the originals (foodsafety) and glued them into the new parts…
This custom-designed cap was specifically made to cover the exposed battery terminals on a Tactacam rechargeable batteries. The cap provides a secure fit, protecting the terminals from accidental contact. The covers are marked with…
Imprimí varios modelos parecidos pero no se ajustaban bien a los diferentes diámetros de los cables decidí crear el mío. Admite un diámetro variable con buena sujeción. Con una cinta adhesiva de doble cara se queda adherido a la mesa y a…
portacavi da muro a 3 misure con foro di fissaggio e fessura per fascetta lasciate un like e aggiungete il mio contatto grazie per la comprensione
Porta foto a forma di macchina fotografica con hashtag Instalove
To hold Prusa Mini+ Power Brick
Soporte de HotEnd v6 para Anycubic Kossel. Se agrega un soporte para el sensor de espuma con el que realizar las calibraciones de la cama caliente, este se coloca entre la pieza ‘Jaula_E3Dv6_Version2_Back’ y el ventilador 5015 para…
A modified Philips OneBlade stand from goldoseb for use with the Panasonic Dentacare EW1031 sonic toothbrush. The factory charger with stand is nice, but I needed something smaller. Print Settings Printer Brand: Creality Printer: Ender 3…
A small case for the Itaca uSCV 8-bit video game console: https://www.crowdsupply.com/itaca-innovation/usvc As I couldn't find an existing one I created my own Printing: I printed it on my Prusa Mini+ with the default 0.2mm Quality…
Concentric knob on navigator radio with cutout for set screw. This is my first item made in Fusion. I've included the 3mf file if anyone would like to improve or modify the design. This is only used on a model, so it doesn't have a set…
Ideato come portacarte pokemon ma utile anche per tutte le carte da collezione,le sue dimensioni lo rendono comodo anche in portabilità,ancora migliore se stampato in tpu
Şarj kablosu geçirmek için gereken kısmı veya enini rahatça değiştirebilmeniz için blend formatında yükledim.
Ho creato questo trofeo per premiare il vincitore del fantacalcio 26-27. E' costituito da 7 parti, così che chiunque possa stamparlo con la palette colori che meglio desidera. Lo scudo è costituito da 2 parti che si uniscono con dei…
Sin soportes/no supports boquilla/nozzle 0,4 mm altura de capa/layer height 0,2 relleno/infill 10%,
The Tascame Portacapture X8 isn't shiped with any form of casing in the box and I wanted one which can hold all the naseserry equipment for it. So I put an inlay in one of Whity's Rugged Boxes for the Portacapture X8 itself along with…
Set di vasi e portacandele Anvora di Polymeria Il set di vasi e portacandele Anvora incarna l'eleganza moderna con le sue linee pulite e il design sofisticato. Composto da un elegante vaso e portacandele coordinati, questo set unisce…
Un'esplosione di allegria per la tua tavola! Questo modello combina un guscio d'uovo schiuso con le iconiche orecchie e zampette di un coniglietto. È perfetto come svuotatasche, portacaramelle o piccolo contenitore per ovetti di…
Printing mishap with Printacaster core short model on Creality K1: After 18 hours of printing the Printacaster core short model on my Creality K1, I discovered a major issue: the bridge couldn't be installed. The bridge, designed with 5…
Cast concrete, exposed rebar, and textured glass blocks. Inner diameter 63.67mm . Scale the model in the slicer for your desired can. Refer to the test file that you can print and check. For handle.stl use supports when printing. Use glue…
PETACA para licor con TAPON ROSCADO y ENGANCHES para cuerda para evitar pérdida de tapón. -Totalmente operativa -Tamaño (escalable): 12,5 cm alto -Tiempo de impresión (para este tamaño): 2 h 7 min Nota 1 - Recordar usar un material apto…
Miles de Modelos Gratis en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/gratis Cientos de Ajedrez en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/ajedrez Pasos Semana Santa en :…
soldering machine holder soldering holder soldering iron holder Recommended Filament: PETG It is strong enough trust me
🔧 HOW IT WORKS All pieces clip directly onto standard electrical DIN rail (we recommend 7.5mm height but all sizes work). Mount your rail inside any cabinet or directly on drywall — compatible with IKEA BESTA and most furniture thanks to…
Designed for 3D printing. Print Settings Printer Brand: Dremel Digilab Printer: 3D40 Rafts: No Supports: No Category: Earrings
Here are the files for my SantaCAM Christmas Decoration. A Christmas Decoration designed to help Santa check the Naughty and Nice list. All the parts print with Zero Support, you can then attach the front and back together by using the…
I modified jangrewe's original Jack Plate as the original was too big. Print in this orientation with a wide brim.
I combined a bunch in Fusion 360 so that I'd have to bolt together fewer parts.
As the proud owner of a new to me Tascam Portacapture X8, I really wanted a case for it. But for some wild reason, there are very few dedicated examples on the market that protect this rather fragile piece of gear. I quite liked how the…
There are two sizes, each is thicker than the original card guide. The 6mm version sits closer to the card than the original, the 7mm version makes contact with the card during the sticker application.
Thx for the excellent design, just adjusted for the parts i received. The only different parts is the core section, the rest can be found in the original design.
