Counting matching models…
This is a highly detailed sculpt of the Hydralisk from StarCraft 2 HOTS. The base model was ripped from the game and the high res detail was manually resculpted by me, based on the character normal and albedo maps. the post was matched to…
You wanna piece of me boy? :P Use body and arm files for print. If you need full model, use full file. And take a look my other models :P All the 3D models of NemoMK2・Cults (cults3d.com)
Remix from: https://www.thingiverse.com/thing:4600435 Same seige tank, but you can move the turret now. Supports required. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Infill: 20% Category: Vehicles
Ultralisk from the game Starcraft 2 from Blizzard. Printed on Ultimaker 2, 0.1mm layer, 20% infill. Support with meshmixer. Category: Creatures
Terran Barracks from the game Starcraft 2 from Blizzard. Printed with PLA, 0.1mm layer and 20% infill. Category: Buildings & Structures
Here's my contribution to all the quarantine creativity: an approximately life-sized C-20A Rifle used by the Starcraft character Nova. Originally I ripped it from an in-game asset, and then added detail from there based off of numerous…
StarCraft_Mutalisk_Fanart by Binhou. https://sketchfab.com/models/c6f44d4309cd46379e1eadd9d79453d5?ref=related To make Binhou's sculpture more printable I have thickened the wing membrane and split the model down the middle. The two…
I really enjoyed working on this model of the galactic starcruiser Halcyon. I made it as a Christmas present for my father-in-law who recently went on one of the last voyages before the experience closed at Disney World. I added a lot of…
Orbital command from the game Starcraft 2 from Blizzard. Printed with PLA, 0.1mm layer and 20% infill. Category: Buildings & Structures
This is a interpretation of the Starcraft 1 Siege tank from memory. Though there are some differences, I believe it is recognizable. Category: Vehicles
This is the supply depot from starcraft 2! of course I added my own little bits too it to make it my own. the top half requires no support, but the bottom half needs a bit of support (dont put support on the ladders, they print fine…
Planetary fortress from the game Starcraft 2 from Blizzard. Printed with PLA, 0.1mm layer and 20% infill. Category: Buildings & Structures
Printed with support from Meshmixer on an ultimaker2. 0.1mm layer, 20% infill Category: Creatures
Starcraft keychain I designed from the protoss logo for a co worker. Enjoy! V1 is the original V2 has a thicker wall where the keyring goes, if scaled down V1 can become too thin.
I think in the meantime you get an idea about my passion to SciFi robots :) … Here comes another model which is originated from late 80s cartoon series “StarCom”. As usual the robots are the minions of the evil … so as well in this…
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
A Siege tank created from memory. Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: .12 Infill: 20% Post-Printing Sanding is optional How I Designed This Fusion 360 Category:…
nachbau der Pilotfigur(en) vom STARCOM M-6
Barracks from starcraft 1. Category: Buildings & Structures
Washing rice can be a hassle, especially when cooking small quantities. Not anymore! Place the tool on top of a soup bowl (mine has a 16 cm diameter). Add a cup of rice. Pour in water. Just enough to match the rice level. More would be a…
I think in the meantime you get an idea about my passion to SciFi robots :) … Here comes another model which is originated from late 80s cartoon series “StarCom”. As usual the robots are the minions of the evil … so as well in this…
This is a fully detailed model of the German polar research station Neumayer III , operated by the Alfred-Wegener-Institute in Antarctica ( https://www.awi.de/en/expedition/stations/neumayer-station-iii.html ). Built entirely on ice, it…
Simple tokens to track activations in the new Starcraft tabletop game The tokens are double sided and requires an MMU or equivalent These are 28mm, just picked a size since I can't seem to find what Archon actually will use when the game…
Uchwyt na tarcze do szlifierki, otwór ok 18mm
Button that I made in thinkercad for the button contest.
Starcraft-inspired Christmas tree ornaments
More large robot prints are comming up :) …. This specifc drone is based on an late 80ies cartoon series called “StarCom”. Those robots were the minions of the evil emperor Dark. This TV series on its own was based on a Coleco toy series…
A firebat from starcraft 2. Made a base to go with it. Strictly for personal use. All rights belong to Blizzard Entertainment. Not for sale or to be reproduced.
Simple model of a starcraft 1 dropship Supports required. Print nose down for best results. Now compatible with Siege tank carrying. Compatible tank https://www.printables.com/model/317302-siege-tank-tank-mode-from-starcraft-1
exclusive Shadow Parasite action figure
Update 1: Added box to transport miniatures and additional token box version with magnet holes to connect the token box to the miniatures box. The lid works for any version of the token box. 16x 8x3mm magnets are needed to connect the…
This is a realistic model of the German polar research station “Neumayer III”, operated by the Alfred-Wegener-Institute in Antarctica ( https://www.awi.de/en/expedition/stations/neumayer-station-iii.html ). It is mainly created based on…
pudełka łaczonew na tarcze do szlifiewrki
Ankylosaur from late cretaceous Mongolia.
Check out my youtube channel for 3D printing and 3D design videos! https://www.youtube.com/channel/UCuHuFfEPBPNv9AmoDYmXFiQ I enjoy doing these kind of designs, Please subscribe to my thingiverse to stay updated on my new designs! I also…
Simple model of a starcraft 1 dropship Supports required
A terran symbol keychain, easy to print. I hope you like it!
This is a sugar skull, or Dia de los Muertos skull, made to look like the "Starchild" or "crystal skulls" spoken about in crypto-zoology circles. It has an elongated skull and humanoid features. I would use supports, particularly for the…
Button that I made in thinkercad for the button contest.
I made a desktop storage box. It's StarcraftⅡ Terran Factory Styling. very interesting. Hope you like it. Wish you happiness! operating instructions: Printing Instructions: You can refer to the supports in the gcode file. This model was…
The Qanba Q4RAF (and the rebranded Eightarc Fusion) is a popular arcade controller, with a cable door that is infamously prone to breakage due to the low strength of its hinge. This replacement door is intended to be printed vertically,…
bombe_print.stl to print without support.
3D Elevation Model of Atka Bay, located near Neumayer Station in Antarctica. The model is created from elevation data taken from REMA (Reference Elevation Model of Antarctica), which you can browse interactively here:…
Button that I made in thinkercad for the button contest.
A bass drum plate set for Tama-compatible drums with matching hole spacing, including many newer models such as some Starclassic Performer, Silverstar, Imperialstar, Rockstar and Superstar drums. Club Jam drums use the same hole spacing…
Mongolian ankylosaur with a paper on its nasal anatomy released in 2023.
I took the decals from Wings of Liberty, Heart of the Swarm and Legacy of the Void, then filled them with triangles in TinkerCAD. Thus I now have a fairly close approximation of the decals. To be mounted with double-sided tape. I…
The case was printed with TPU and the Terran sign was printed with PLA (I used 0,3 mm nozzle). The PLA part is just 0,2 mm thick, so it doesn't feel any stiffer than the rest of the print. I did this by creating separate stl files for…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
3D Model of the entrance to Starcourt Mall from Stranger things season 3
A pendant for your techno/space-mystic cult members who worship communications across the stars. This pendant can also re re-scaled and used as an emblem for any number of other things or projects.... (Disclaimer: Every vertice, face, and…
I printed these 7 of these card boxes for our copy of the StarCraft Board Game with the Brood War expansion. OpenScad Parameters l: 100.0 h: 60 Faction Boxes Inside Box Dimensions: [20, 5, 16] Other Boxes: Inside Box Dimensions: [24, 17,…
Vhorlath Realms – Season II Reptilian Jadecrest Starcaller 3D printable STL miniature for fantasy tabletop RPGs, miniature painting, collecting and display . The Jadecrest Starcaller is a mystical Reptilian temple seer, keeper of old…
Witam! Prezentuję osłonę tarczy pilarskiej z montażem do odkurzacza do pilarek stołowych marki Bosch. Pasuje do modeli GTS 10 J oraz GTS 10 XC oraz prawdopodobnie i innych. Zakres grubości cięcia z załorzoną osłoną wynosi 63mm. Model…
Just a simple Ring with the Logos of Starcraft. 20mm inner diameter. needs quite good print resolution and slow printing.
Don't print any smaller than 2cm otherwise the handle may go wonky and be unusable. 4cm turns out a little too large to hold in your hand comfortably. I would recommend around 3cm. 3D model designed by me to be a fidget and a keychain all…
This is a Starcraft Themed Outer Ring for my cryptex Combination Safe 00 . Created using Outer Ring Customizer (OpenScad) Category: Containers
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
A replacement for worn-out or lost Tama Starclassic-compatible lug spacers/gaskets. Modeled from a '90s Starclassic Maple snare drum (the painted-logo model) to replicate the originals. Fits: Tama Starclassic-compatible snare, tom and…
The three StarCraft II race splashes, seamlessly incorporated into the design of a 120mm PC fan shroud. A classy addition to your PC, demonstrating your love for StarCraft. I included holes for mounting to case fans, as well as slots for…
Prosty stojak zmieści pare tarcz. Uwaga stojak nie do wieszania tylko do postawienia.
Aristarchus de Samos – Buste 🇫🇷 Description (Français) Ce buste d’ Aristarque de Samos représente le célèbre astronome grec de l’Antiquité dans une interprétation sculpturale fidèle aux canons classiques. Inspiré de la représentation la…
It's simple template markin 3" of space from objective template in Starcraft TMG.
Traced images of the Purifier and Nerazim decals. I unfortunately could not get a good one of the Tal'Darim, and it would probably be too delicate anyway. Both decals only have one part. Print in Green and White/Gold for Nerazim and…
This is a model I made for my families pop-up trailer (Starcraft Galaxy 6) We gutted the whole thing and built several more beds (large family) and during one of our camping trips we got very heavy rain and unfortunately we hadn't really…
This is a Molle tag of the terran symbol from starcraft 2
I needed a way to organize all of my blades and accessories for my Starcraft Solo die cutting machine so I quickly threw one together in Tinkercad. It will probably work for holding the blades for Cricut or Silhouette machines as well.
There are 2 pieces. Door frame - print standing up, no supports should be required Door - print lying flat, no supports required There is a ridge on the door frame that will hold the door open, or you can just remove the door when the…
Ceratopsian from late Cretaceous North America.
A wallmount for guitarcables with a slot for the audiocable you have to put the audiojack part into the cylinder with the side that has no cutouts pointing at you. I used superglue to secure both parts together
it should be light enough to mount with just some tape. feel free to modify the thickness how you like. i also included a version with a hole at the to for mounting with a string or screw.
Set of Starcraft Keychains. Design Highlights Reinforced Loop: Extra-thick attachment point to ensure the keychain survives daily wear and tear on your keys, clothes or gear Low Material Cost: Each keychain uses approximately 3-8g of…
With the help of AI it came out as a greate Model. i like to use it.
A replacement snare and tom lug insert compatible with Tama Starclassic drums. Modeled to replicate an insert from a '90s Starclassic Maple lug (the model with the painted-on logos). Fits: Tama Starclassic snare and tom lugs. Files:…
A replacement for worn-out or lost Tama-compatible bass drum mount spacers. Modeled from a Tama Silverstar bass drum mount. Fits: Tama-compatible Starclassic, Silverstar and Imperialstar bass drum mounts. Files: TSCBMS.stl : bass drum…
Hero Board Board holds 6 weapons, upgrades, armor, etc. It is recessed to keep pieces in place while still making it easy to turn pieces over. Shuttle The shuttle has indents, so the heroes don't slide around during flight. They still…
Designed and tested in Antarctica. Now on your feet!
A replacement bass drum lug insert compatible with Tama Starclassic Maple and Starclassic Birch drums. Modeled after an insert from a '90s Starclassic Maple bass lug (the model with the painted-on logos). Fits: Tama Starclassic Maple and…
Idealnie nadaje sie do próbek filamentów
Brelok tarcza Temerii Inspirowany grami “Wiedźmin”, “Wiedźmin 2: Zabójcy królów”, “Wiedźmin 3: Dziki Gon” od CD Projekt Red Idealny do kluczy i innych przedmiotów
Brelok tarcza Nilfgaardu Inspirowany grami “Wiedźmin”, “Wiedźmin 2: Zabójcy królów”, “Wiedźmin 3: Dziki Gon” od CD Projekt Red Idealny do kluczy i innych przedmiotów
A replacement for worn-out or lost Tama Starclassic-compatible bass drum spur bracket gaskets, the piece between the spur bracket and the shell. Fits: Tama Starclassic-compatible bass drum spur brackets with a square 58 x 58 mm hole…
Slots for tracking active unit upgrades. Fits small cards in stadard 41x63mm sleeves. Cards for print here: https://drive.google.com/drive/folders/1q9dwxQscYHsLaLiRMN4rqaH No supports needed, just a quick color change for the unit name…
![Dropship (Starcraft 1) [Carries tanks]](https://media.printables.com/media/prints/319398/images/2762714_e7334efe-91b4-4834-b95c-5f562f8c6c78/pxl_20221118_143302557.jpg)
