Counting matching models…
CATCLIP / LST clip for plants Low Stress Training. practical to curve and form the plant branches in order to provide more aeration, light exposure, fruiting… useful for all kinds of plants! the stock size is made for 8mm stalk. RESIZE as…
Since the usual filament clips for small filament rolls (250g) are impractical and too long, I have developed this filament clip. It MUST be printed from flexfilament (TPU)! I am aware that printing with TPU is a bit problematic.…
It would be nice if you post your make. Thank you
A super easy clip to personalize your desktop supplies or add some flair to your bills. We printed it at .15 layer height with our .6 nozzle, but only because that is what is hooked up right now. It would probably still be ok with a .4…
Das ist ein Nachkonstruktion des handelsüblichen GoPro-Montagehalters zum Aufkleben. Der Halter besteht immer aus zwei Teilen, die anschließend mit der flachen Seiten aneinander geklebt werden müssen. Den obere Teil für den Clip-Halter…
This model is a beltclip for the Poké Ball from "kriswillcode" https://www.printables.com/de/model/166243-pokemon-poke-ball The hooks on each side could be used for a rubberband or similar as a secondary safety. 2 Parts: Beltclip…
Updated V2 with improved stability Material: Prusa PC Blend, Polycarbonate Infill: 100% Support: No Rafts: Yes 15mm outside only
I changed the original with a slightly longer clip length for a tesla model 3. On the driverside on the complete right you can see a metal attachment of the dashboard where it can hook into. The original clip is just too short, so I made…
This is my first upload. Just a simple Clip for 1.75mm Filament. No support needed. Use TPU for printing. Print Settings Printer: Artillery Siderwinder X1 Rafts: Doesn't Matter Supports: No Filament: Geetech TPU Category: 3D Printer…
configurations in .f3d file Hold power Belt thickness Belt width Text letters (in extruded sketch) Text on/off Hole features on clip on/off includes step file for easy editing The snapfit can be “snappy” if configured right. the base file…
Meet the FistClip The Fistclip is A Super cool and efficient filament clip PLUS it is easy to Print! BENEFITS: • Built-In Self Adjusting Clamp • Firm Grip • Fantastic Design • Makes you Happy! Note: •The FistClip can be used commercially…
fits this raspberry pi 4 case: https://www.thingiverse.com/thing:4595017 mount it on a leg on the ikea enclosure or just let it stand. Print instructions 0.2 mm no support needed
Remix of Wuggi's excellent EQ5/HEQ5 tripod leg transport clip to print it without supports. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: Variable Infill: 10 Filament: C-Tech PETG Notes:…
This is a shelf for the IKEA Skadis board I designed for holding two Milwaukee M12 batteries. This shelf is wide enough to hold the XC batteries as well as the standard M12 battery. This print utilizes the T-Clip System from user Line Arc…
Upgraded clip for the best grip and made a half version for light look.I tried on 91mm so If you are going to use it on a larger model, you can use the half version.
A basic belt clip for the Beats Fit Pro earbuds case. Wanted something similar to my pager belt clip from 1998. I used the model from 10000ukuleles on Thingiverse for the basic fit. https://www.thingiverse.com/thing:5179759
A Remix of "Low profile shock absorbing feet for 2020 V-slot (single) profile" with a Twist Clip
This is a vertical pocket that attaches to a belt and holds the Apple Vision Pro Battery. The holder can slide on and off the clip or it can be glued into place. Print the Clip on its side with a Raft and Support to give the most strength…
I have tested some but not all filament clips and was not really satisfied with any of them, each could do one but not the other. I wanted a clip that would stay firmly on the filament spool and not be an obstacle when unwinding the…
Beltclip for Zepro Truck taillift remotes designed to be printed in TPU Designed this to replace the originals that are expensive and break very often, been using this for the last 2 years at the company i work for on around 70 remotes…
Filament clip for Prusament rolls 1.75mm Easy to place and move.
Heavily inspired by @Quesabyte 's design. https://www.printables.com/model/570584-pokemon-go-plus-belt-clip I wear this on my wrist attached to my watch strap though and it would fall out of the clip when I bump my arm. I built this model…
This is a battery holder for the IKEA Skadis board I designed that holds a Milwaukee M18 battery. This print utilizes the T-Clip System from user Line Arc Line which allows for easy and strong attachment and re-attachment to the Skadis…
Holds five (5) airsoft shotshells in a clip that can attach securely to your belt or webbing. Prevents shells from falling out while running, crawling, or maneuvering. Do you reload with your left or right hand? There are two options to…
A simple beltclip for Firework Bullets for Silvester. Perfect for a 6 shot 6mm signal gun with 15mm expansion. Prints in ~2h without support with a 0.6 / 0.8 Nozzle. Print it now!
Ein Filamentclip speziell für Prusament entworfen. Der Clip besitzt eine Nase an der Befestigungsseite der Spule. Diese Nase fixiert sich in der Wabenstruktur der Spule. Der Clip verrutscht hierdurch nicht, aufgrund der sehr glatten…
Ein Clip um das Filament auf der Spule zu befestigen. Einfach das Filament durch das kleine Loch schieben, den Clip von der Aussenseite auf den Spulenrand schieben. Der Clip verbiegt sich etwas und klemmt das Filament fest. A clip to fix…
At the moment the clip quattro v3 works but is too big to fit in the charger and needs some tweeking. The clip quattro final fits in the charger and should work, although not perfectly. Replacement for the standart beltclip. Uses the pin…
V3-Beltdiameter is 6mm for overlapping V4-rounded corners Build for 40mm x 3mm belt like most Tactical Belts on Aliexpress I use it for my Ares Amoeba CCR Airsoftgun, even jumping and running hold it in place.
Hallo, ein kleiner helfer der meine Rosen hebt,ohne binden zu müssen ;) Print Settings Printer: Anet A8 Rafts: Yes **Supports:** No Resolution: 0,15mm **Infill:** 25% Notes: I just printed it flat on a glasbed with PLA. Category: Outdoor…
Beltclip with basic toolplate. You can attach tools or bags to this clip and easely de- and reattach it to your belt. I printed it in PETG for strength, but PLA will do, better is ABS. Total printtime was about 16h, infill 50%
Here is a small beltclip for the UniCutter (a small, refillable cutter for e.g. balloon professionals). You just need to print the two lids from the UniCutter and this beltclip and you are ready to withstand any balloon line working job.…
Installation can be done after Thightening the Belts. Slot for Cabletie is there but i think not needed. CHECK Z HEIGHT OF your Printer.
Hello, Welcome to my profile, full of models and miniatures :-) I have a Belt Loop for Keys for you. The ideal solution when you don't have pockets but need somewhere to put your keys. One part of the loop can be put behind your pants or…
simple filament clip, easy to print & good bed adhesion
ENG: A simple flashlight clip with integrated hole for a screw. Flashlight diameter should be around 25 - 26 mm Hole is for a screw with max 4,5mm Diameter. Screwhat should be max. 7.5 mm ----- GER: Ein einfacher Taschenlampen-Clip mit…
I usually store my belts rolled up in a drawer or on the sideboard. However, rolled-up belts tend to unroll, eventually leading to a mess. This clip is my solution to the problem. It keeps my belts neatly rolled up, making them easy to…
da der Gurtriegel immer zu weit runterrutscht habe ich diesen Halter konstruiert um ihn in einer greifbaren Position zu halten und sich lästiges Gefummel zu ersparen . Since the belt latch always slides down too far, I have designed this…
I is easy to fit to your belt and pendrive by editing the user parameters in the Fusion modell.
The Printclip is a simple design for a Paperclip which is exclusively available on Printables. If you like the model, please consider leaving a Like and/ or download the model files, if not, I would be happy if you could send me a message…
The GhostClip is very useful. It can be used as a clip or a bookmark, the possibilities are endless. Get your GhostClip today! It also has my initials on it. It is almost like a signature but not quite one. This was a collaboration…
Ich verwende den Clip für meine 1,75er und 2,85er Filamente und man kann Sie zwar in einer Schachtel zwischenspeichern, aber wozu hat man einen 3D-Drucker…? Also habe ich einen Speicher/Spender designed… Ich habe es beschriftet designed,…
Description: The BitClip Mini is a compact and minimalist bit holder designed for the TheSummit wallet by @revere521 , a 3D printed wallet that uses rubber bands to secure cards and cash. It was designed in Fusion 360 and adds everyday…
Promptclip-Automatedmodeling
Replacement belt clip for Crawford Remote Print it oriented like in the picture.
english A small clip for the small Extrudr filament spool (200 mm diameter). Very small protrusion over the spool. Recommended material: PETG Since the contact surface with the printing plate is very small, I recommend printing the 6-pack…
simple clip to help guide/grow the plant in a direction
ORBITClip is the everyday carry module in the S33D ORBIT ecosystem. Slide your AirTag into an ORBITTag, press the assembly into ORBITClip, and attach it anywhere — belt loop, backpack strap, waistband. Secure, minimal, and printable in…
I tried to make this model as: easy printable/assembled as posible. Requiring minimal aditional hardware and posibility for easy modding. With right print setings it shoud also be reasonably sturdy Recomended as manny walls as possible…
Summary: The Ghost Clip is an innovative, groundbreaking innovation which involves a Ghost that doubles as a clip (and availability as a bookmark). Spanning 3 by 6.5 inches, the space-effective yet groundbreaking model will undoubtedly be…
Objective: The objective is to build a replica Ghostclip with a partner using the software, solidworks, checking in at each individual step while making sure you and your partners ghostclip's are identical. The Construction Instruction…
This is a sorta Beltclip/case for those new Casette players that are still made today. This is designed specifically for the Taperoller plus from Dirttapes, I have the old MiniUSB version, feel free to tell me if it doesnt fit the USB-C…
A simple holder for 8 Nerf/X-Shot foam darts. Printed in 0.2 without support.
Summary Cont. @PaulSmetkov_3771537 and I have designed an organizing device that can clean up your desk space and add a little life to it. Lesson Plan In order to learn and get comfortable with using Solidworks and formulating a plan to…
I needed a quick solution for my anker power bank so that i can carry it on my belt... so i used my very small fusion360 skills to make a box where the power bank fits in. Then i fused both parts ( the box and the clip from @chris_78443 )…
This is a community project and was designed by me with a lot of feedback from the community. Thanks to all the testers, helpers, and everyone who printed the finished model. More about the Macher Festival: macherfestival.io
Gurtband-Endclip / Gurtclip für Absperrständer (Ersatzteil) Der perfekte Ersatzclip für Ihr Personenleitsystem! Dieses 3D-gedruckte Ersatzteil ersetzt den originalen, schwarzen Endclip am roten Absperrband von Gurtpfosten. Wenn der…
Gurtclip für BT Intercom wie Xinowy, oder ähnliche. Wo er genau passt muss jeder selber heraus finden. Ich habe das Modell gemacht, weil die Textiltaschen die dabei sind nicht optimal für meine Zwecke ist. Verwenden es am Boot.
A basic 3d-printable model of the beltpiece worn by various characters from the anime Sword Art Online in GGO made by commission
Die original Clips verschleißen sehr schnell. Daher wurde dieses Modell entwickelt, welches in jeder Dimension dickere Strukturen verwendet. Das Modell kann in PETG oder PLA gedruckt werden, ggf. sind Stützstrukturen erforderlich. Wenn es…
I printed with Prusament PLA Prusa Orange and Galaxy Black, in my testing the PLA breaks after about 2 days of use, so you should probably use something like PETG or ASA/ABS. I printed with: 0.15mm Layer Height Supports ON 0.4mm nozzle…
