419 models
Remix of https://www.thingiverse.com/thing:4268067 which is not currently available on Printables. Modified to hold a Teensy 4.1, two spare microSD cards, and with an added label recess that can be revealed by prying off the front plate .…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Drew up and created a 3D, multi-color, version of the classic 90s cartoon Teenage Mutant Ninja Turtles logo. Printed with Hatchbox Red, White, and Green and Prusament Galaxy Black PLA filaments. Drawn in Affinity Designer, imported as a…
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant
Same outer dimensions as the original knobs on the KO II. This knob fits the slider without using unnecessary force. This model is tried with PLA on a Prusa Mini. Printed with 0.2mm layer height, 15% infill, Prusament PLA Galaxy Silver.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Print Settings Material: Gembird - Grey Petg Nozzle: 0.4mm Layerheight : 0.25mm Support: No
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Today I have Ninja Turtles for you. My kids love these characters and I love coloring them. Interesting look. For proper functionality, you need to use a Print Profile! I used PLA/PETG as the material. You need to use supports!!!…
Print approx. €8.81–€10.77 excl. taxPreliminary estimate for one variant
A very small, neat case for the love of your life, your Teenage Engineering OP-Z. Sliding removable lid, with spaces for optional magnets. Prints in PLA - no flexibility required. I wanted something that barely increased the OP-Z size at…
Print approx. €6.93–€8.47 excl. taxPreliminary estimate for one variant
A storage for the Harder and Steenbeck Ultra airbrush. You need 8x 6 x 2 mm magnets This is part of my magnetically stacking “Airbrush Storage” system. Check out more parts for this system and my other airbrush models here on printables .…
Print approx. €5.08–€6.20 excl. taxPreliminary estimate for one variant
A storage for the Harder and Steenbeck Evolution airbrush. You need 8x 6 x 2 mm magnets which will be included in the print. You will have to add printing pauses to add them! This is part of my magnetically stacking “Airbrush Storage”…
Print approx. €5.59–€6.84 excl. taxPreliminary estimate for one variant
Off Duty in the Outer Rim : Leia's teenage Grunge Band “No Krew Remains” The blaster fire faded, but the echoes of captivity lingered, a cold, metallic tang that clung to Leia long after her escape. Publicly, she was the picture of regal…
Print approx. €10.59–€12.95 excl. taxPreliminary estimate for one variant
Printed in PETG at 0.15 mm with a 0.6 mm nozzle
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for PETGSource material: PET
Wanted to hang my OB4 on the wall
Print approx. €5.63–€6.88 excl. taxPreliminary estimate for PETGSource material: PET
Hello, young Bruce Springsteen bust. Thanks for your download, enjoy the print!
Print approx. €7.30–€8.93 excl. taxPreliminary estimate for one variant
Killer Moth : Teen Titans Go
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for one variant
Updated the lid to make sure it fit the bottom of box. Lowes Mini Box. Flat lid included allowing you to add text in slicer of what is in the box! The indentations in the bottom of the box is 1 mm and your printer has to be able to print…
These are the files for a 3D printable wooden storage rack for the Lowes Teeny Tote Bins aka the 3D Printable Bins by @MelissaDay https://makerworld.com/en/models/1721852-mini-hdx-tote-bins-and-storage-rack#profileId-1899549 These storage…
MICHELANGELO TMNT REMIXED
Raphael (Teenage Mutant Ninja Turtles) support removed from original
LEONARDO TMNT REMIX
Donatello re-mixed
Updated 20230615 Someone said the "1.1 Part-Shell-Front" is too tight to insert into the body, so I modified it, you can try the new part now. ____________________________ Updated 20230605 I separated the body into 2 parts, now it is…
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
Update 2023/09/18 Version without a visible logo/name added About this project I designed this airbrush stand to fit into my workspace, following my design style and passion for hexagonal shapes. As I have a Harder & Steenbeck Evolution…
hi there! This is a case i designed for my own use for my pocket operator but figured others might have a good time using it too! Requires: 2x M3x4x5 brass heated inserts - link 2x M3x5mm bolts - link Print settings: I used a 0.2mm nozzle…
I currently into Dirtywave M8 Headless tracker but I'm not found any simple case for my Teensy 4.1. So I created one. Models come with 2 type of lid: Teensy41Lid: Standard lid with ventilation holes Teensy41Lid_heatsink: Cutout lid for…
Remix of the original to allow printing the bins without support. Printed in Polylite ABS on CORE One, other materials should work fine.
Huge thank you to Printables user soozafone for creating Lucky 13 . You will need the Lucky 13 armature and skin. You will also need the Body v2.stl from RxR 's multi joints for Lucky 13 model. Assembly of the head is pretty…
Printing time around 1.5-2h. Printed with PLA without supports.
This tripod-style airbrush holder is a sleek design that holds your H&S airbrushes, standing firmly on your desk with fully protected tips. The best print option would be to print in PETG with high infill, to get a better chemical…
This model prints best with a resin 3d-printer but works also with FDM. Cowabunga! Juri
All four Teenage Mutant Ninja Turtles
A stand to raise the Teenage Engineering KO II sampler to a more comfortable 10°-20° incline. Slotted pegs insert into pre-existing holes in the KO II for a snug, removable press-fit (depending on your printer tolerance). There are three…
Tip dry can occur during airbrushing with acrylic paint, causing the airbrush to splash. By using this air cap, the needle can be wiped clean with a cotton swab. The air cap can be used on a Fengda airbrush as well as a Harder and…
Bobblehead from a scan of a classic TMNT figure for use with 3D Printy's bobble head spring and base Files for spring and base can be found here: https://www.printables.com/model/224836-emoji-printer-bobbleheads Print Settings I used…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Unleash the fiery charm of the Teenage Lava Dragon ! These fierce-yet-cute articulated creatures come in three sizes – Baby, Teen, and Adult…
Little piggies for my tiny animal series. They stand approx 20mm tall and I printed them at 0.2mm layer height. I have included the stl and the 3mf. Don't forget to sign up to my 'print and sell' membership if you want to print and sell…
This is a small stuby driver bit handle. It is friction fit. The Dewalt driver bits shown work well with it and give a bit of grip if you want to use it for different driver bits. Or you may want to just print a bunch of handles for each…
This is a printable replacement of the volume knob for the Teenage Engineering OP-Z. Print material: PLA, PETG, ABS Print several at once to improve cooling and reduce the layer time per part. Remove the old volume knob. For reassembly…
This design is a 3d model of the classic Teenage Mutant Ninja Turtles manhole logo as well as the newer TMNT style. The prints are separated by color and everything should press-fit together. The only part that might need supports is the…
Choose a color for the mask, one layer of red for tongue, the last layers for mask (in any of the colors).
7 Unique buildings and many hidden surprises on a tiny footprint!
Recreation of the well-known Fifteen52 Turbomac to work with Lego Technic parts. This model has been splitted in two halves for better printing and minimum usage of supports. The holes on the hub uses this part: BrickLink - Part 32002 :…
a like is not a crime ;) Enjoy the Teenage Mutant Ninja Turtles Sewer Diorama / Playset it fits perfect for the IKEA Billy shelves its 760mm lenght 260mm deep 270mm high use 3x10 screws for floor /walls and 3x15 for walls /walls have fun
Some stuff for the Teenage Mutant Ninja Turtles Sewer Diorama / Playset All wall decorations have a “click” system for the walls all multilcolor parts printed on the bambulab a1 mini with ams lite - sorry for that prusa! for a nicer…
Not my model, just remodeled/reuploaded to be printable with multiple colors Uses 5 colors Teenage Mutant Ninja Turtle for multi-colored FDM printing. Original Artist info: Teenage Mutant Ninja Turtle for 3d printing. Help me keep doing…
Designed for 12x60mm or 74mm carts. If you need a different size, just leave a comment. 0.25mm tolerance, 0.375mm crush fitting. Lady: 17in thigh circumference Gent: 24in thigh circumference If you're unsure which one to go with, just go…
hey hoy- lets go … set 2 including: cctv + wall mount small Table wall mountable basketball pipe system + wall mount bar stool wall lights one cord + two cord enjoy it
I made the dimensions suitable for a 0.4mm nozzle and 0.2mm layer height. It's safer to have 100% infill, it doesn't affect print time but makes it less prone to print failure. I also recommend concentric layers. Have fun! … oh, and don't…
Umpteenth Filament Shrinkage Calibration Models' Why These Exist This is probably the umpteenth set of filament shrinkage calibration models on the internet. I made my own anyway because I make most of my own stuff and wanted dedicated,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a Teensy 4.1 case. Printed out on Anycubic Photon Mono 4K using Anycubic Water-Wash Resin+ Gray . Magnets are glued with poxipol. The backplate is attached to the console using velcro. Teensy 4.1 gets very hot, so the case design…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Teenage Mutant Ninja Turtles Use any color for the turtle that you would like. (Including the baby blue for the girl turtle for true fans, even if that series was the worse one made). I print all my earrings and keychains with a .2…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A ninja-like turtle that may be the teenage equivalent in the species. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This canteen is designed to hold a 80mm ecig battery and 62mm or 52mm carts Join my patreon to sell this commercially! https://www.patreon.com/mozWORLD
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
i recommend using snug supports
my variations of the tmnt heroes and allies
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A Parametric Model for Airbrush Cup Lids With files for the Harder & Steenbeck Ultra 5ml and 2ml Cup
A full size hard case/travel case for the teenage engineering op-1 with a replica op-1 layout on the top, includes a side panel to allow access to the headphone and charging ports while in the case and has the option to embed 5mm magnets.…
Enjoy the Teenage Mutant Ninja Turtles Sewer Diorama / Playset it fits perfect for the IKEA Billy shelves its 360mm lenght 260mm deep 270mm high use 3x10 screws for floor /walls and 3x15 for walls /walls have fun
A stackable teeny totes storage rack. no assembly required.
A lid for the H&S 2024 model 5ml cup to stop paint drying, not sure what they were thinking on this one. Included 2 versions V2 is slightly smaller in diameter by .2mm if you find your fit is too tight. I stuck with V1 as it fits very…
ko II 2 ep 133 teenage engineering Battery Cover in prusa slicer its easy to add text. embossing etc this is a first pass. tolerances could be better. size is slightly off. It fits though. Ill circle back and update slightly at some…
I have no affiliation with Teenage Mutant Ninja Turtles or their creator / copyright holder. I am just a fan. I have create a 3d turtles log which should be printed in four different colours using a 'filament in cura'. Start off with…
This is yet another Macro Keyboard / Stream Deck! There are plenty of awesome designs out there and many on Thingiverse, but none that were exactly what I was looking for in a macro keyboard. The general design for the Teensy StreamDeck…
This BUST can be upgraded into a full Ziptie action figure. Here is an assembly video for reference: 3D PRINTED TEENAGE MUTANT NINJA TURTLE ACTION FIGURES NEW - YouTube
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Size isn't perfect I had to heat up my bit with a lighter so it might take a few shots if you want it hot-swapable with other bits, basically I scaled down the old screwdriver handle to accomodate 4mm bits, when I did a numerical…
Replacement fader knob that fits the full length of the stem and rests on the EP-133. You might have to adjust the X and Y scale a little to get it to fit perfect. I was at 102% in prusaslicer for a perfect fit.
I needed an easy way to cover up screw terminals I used to mount sealing lighting. So I designed these to fit different sizes of what we call in the Netherlands "Kroonsteentjes" what is "Luster screws" in English as far I can find. They…
This is a remix of my Sharpie Guy entry into the Sharpie Mod contest. This was so much fun to make, especially the nunchucks. I printed the arms, legs and shells at a speed of 100, with a resolution of 0.2 mm and everything else at a…
This is a phone stand modelled after a Dragon Ball character making it functional and decorative. If you like the work I do, feel free to support me by buying me a coffee . Printing Plastic = PLA Bed Temp = 60 degrees Hot end Temp = 210…
I originally printed these on a Prusa i3Mk3s+ using PET-G at 30, draft mode, with 25% infill (Support cubic). You can try printing at 15 or 20 detail mode, as you like. (It's a pretty big print, so draft works fine imho.) Designed in…
I wanted a cover/protector for the EP-133 so I can throw it in a bag for travel. I grabbed the official bag from TE, but it's a soft bag, so I made a cover to go along with it to protect the fader and knobs from crush damage. My design…
a upscaled Sewer Party Tube i printed the net and the net_holder with tpu for all other parts i printed pla
Supports required! Please add supports to the edges only! Not required for the bridges or for inside cartridge slot! Designed to be used with Teensy 4.1 Game Boy Cartridge Case, available on Printables here:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Raven Teen Titans Go. Posed. Smoothed. Fixed for printing. Probably will need a base.
Exactly fits printed using default settings on a Bambu Lab A1. Scale accordingly if your printer's dimensional accuracy is off/different
12cm vysoký Teenage Mutant Ninja Turtles - Donatello
This is a remix of a few different files to create a TMNT inlay into my favorite storage box as a toy box for my son. The original box can be found here: https://www.printables.com/model/71007-small-parametric-tool-box/files Some parts of…
Stand is 2 models, 5 prints. It utilizes m4 hardware. So you will need M4x6mm flat head screws and I used M4 heat inserts 6mm diameter and 4mm long. You can add rubber bumpers as needed but it has been working fine for me without any.
Free model to try my products! Please follow and please like and post your makes! This helps my channel and Club grow! Download the instructions file to know which colours are best and when to change layers. Decorate your music room,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I love my TE OP-Z so much but accessory for it is currently limited. So I made this model in hope it could help people easily make more accessory for it.
This is a hard case for the Teenage Engineering Pocket operator series. Needed something to protect the synth while traveling (this case have been tested in rough conditions(i.e. my wife's handbag)). At the same time I prefer playing on…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
12 cm vysoký Teenage Mutant Ninja Turtles - Raphaelo
An other mount for my Sigma Rox 11 (Garmin Base). This time for the e*thirteen Base (40mm) Stem . May be usable for other stems too. You need two M3 countersunk screws ... i used my dermel to shorten them.
My original one was broken and I was unable to buy new one instead. So I decided to make my own one. Print with support. Hope you're like it.
This TMNT comic book stand backing can slide into a comic book stand that allows for backing/plate changes and can also be hung on the wall and used as wall art. If you are obsessed with Teenage Mutant Ninja Turtles then I think you'll…
Made a keychain version of ElGato's cool Seventeen logo. Pics are two flavors of silk PLA that I switched on the fly. Thought the big one was too big so scaled it down to 70% for a smaller one. Pen knife for scale.
This is a remix of the communicator designed by welshmnky found at https://www.thingiverse.com/thing:3021759 . I can't seem to link it using Thingiverse, so here it is. I designed each piece to be able to be printed separately in…
A special edition commemorative coaster marking TK-1889's (pictured) blaster range passing score. An almost unheard of feat. Found only in finer Death Star canteens, and embossed with the official imperial emblem (to keep you thieving…
This is a headphone stand with Teen Super Saiyan Gohan from Dragon Ball Z, it's a model that is fun and powerful at the same time. This headphone stand comes in 2 parts, the actual stand with the figure and then the headphones holder to…
